Model: AMG-PRO Quick Start Guide
Hardware Overview Top LAN Port POE Port LED RJ45 Connector (Male) LED Steady White Power on and initializing Steady Blue Working properly and actively connected Alternating Blue/White Device is busy; do not touch or unplug.
Bottom Reset Reset Ext Reset Buttons Reset To reset the airGateway™ to factory defaults, press and hold the Reset button for more than 10 seconds while the airGateway is powered on. Reset Ext To reset the airMAX® device connected to the airGateway to factory defaults, press the Reset Ext button for about 8 seconds while the airMAX device is powered on.
Installation WARNING: Do not connect non‑PoE devices (such as laptops) to the POE port. To install the airGateway, perform the following steps: 1. Disconnect the Ethernet cables from the Ethernet ports on the PoE Adapter that is connected to your airMAX device. Ensure that you note which cable was connected to the POE port and which cable was connected to the LAN port.
2. Connect the male RJ45 Connector of the airGateway to the Ethernet port labeled POE on the PoE Adapter. 3. Connect the Ethernet cable that was disconnected from the POE port in step 1 to the Ethernet port labeled POE on the airGateway.
4. Connect the Ethernet cable that was disconnected from the LAN port in step 1 to the Ethernet port labeled LAN on the airGateway.
Connecting via Wi-Fi To configure the airGateway, you must access it via Wi‑Fi from a host machine. 1. Connect your host machine Wi-Fi to the wireless network (SSID) named www.ubnt.com Note: Ensure that you have DHCP enabled on your Wi-Fi adapter. 2. Launch a web browser and go to: https://192.168.1.
3. The airOS® login screen will appear. Enter ubnt in the Username and Password fields. Upon initial login you must select your Country, Language, and agree to the Terms of Use to use the product. Click Login and the airGateway Setup Wizard will appear. Note: U.S. product versions are locked to the U.S. Country Code to ensure compliance with FCC regulations.
4. Change the default airGateway administrator password. Enter a new password in the New Password and Verify Password fields and click Next. 5. Enter a name for your wireless network (SSID) and a password (passphrase) for your wireless network. Click Next.
6. Verify your settings and click Finish or click Previous to change the settings. The airGateway is ready to use. Connect wireless clients as described for the appropriate operating system: Windows 8 1. On the Start screen, mouse over the lower right corner and click the settings icon when it appears. 2. Click the wireless icon.
3. Select the wireless network (SSID) that you defined in the airGateway Setup Wizard and then click Connect. 4. Enter the password defined in the airGateway Setup Wizard. Click Next. 5. Select your sharing option to finish setting up the connection.
Mac 1. Click the AirPort icon in the menu bar (top right side of the screen). 2. Select the wireless network (SSID) that you defined in the airGateway Setup Wizard. 3. Enter the password defined in the airGateway Setup Wizard. Click OK. Once connected, the AirPort icon will change from gray to solid black.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
(IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident; (V) has been damaged or impaired as a result of using third party firmware; (VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer’s selection of products (including the Products) for buyer’s application and/or failure of products (including the Products) to meet government or regulatory requirements.
YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2.
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the band 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. Les utilisateurs devraient également noter que radars haute puissants sont alloués comme principaux utilisateurs (c’est-à-dire les utilisateurs de priorité) des bandes et 5650 à 5850 MHz et que ces radars pourraient causer des interférences ou dommages aux dispositifs LAN.
Australia and New Zealand Warning: This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it.
Deutsch Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte.
ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto. Français La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères.
apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano.
English Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI NETWORKS device, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Eesti [Estonian] Käesolevaga kinnitab UBIQUITI NETWORKS seadme UBIQUITI NETWORKS device, vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Íslenska [Icelandic] Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í tilskipun 1999/5/EC. Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Español [Spanish] Por medio de la presente UBIQUITI NETWORKS declara que el UBIQUITI NETWORKS device, cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Polski [Polish] Niniejszym, firma UBIQUITI NETWORKS o wiadcza, e produkt serii UBIQUITI NETWORKS device, spełnia zasadnicze wymagania i inne istotne postanowienia Dyrektywy 1999/5/EC.