User manual UBIcapture sensor manual version 1 UBIcapture UC2
1. Preparations Please read carefully and keep in a safe place. Prior to installation, check all components for damage, and do not use the product if damaged. Make sure to map out which areas in your building you would like to monitor, what metrics you want to capture, and how many sensors you need for optimal results. For assistance, please contact UbiqiSense or your local partner. Copyright. Reproduction of this document either in whole or in part only with our written consent.
verse: either with the “hinge” in the right side (see fig. 6) or on the left side (see fig. 7). This way the sensor can be mounted to every angle. To achieve optimal placement see fig. 17 & 18. 9. Technical specification 5. Installation & Calibration For single sensor installation: Make sure the UBIgateway is within Wi-Fi range of all sensors. If distances are too great, Wi-Fi extenders may be needed (NOTE: less applicable if the building’s existing Wi-Fi connection is being used).
Fig.1 D A E F C A- Sensor housing B- Optical sensor C- Wall mount clip D- Led status indicator E- 5V DC power supply F- USB-C B Fig.3 Fig.2 22,5mm 52mm 12mm 21mm 30o 120mm 65mm 45o Wallmount Fig.4 4 Fig.
Fig.6 Fig.7 Fig.8 Fig.
UbiCapture HD Fig.10 Top view single sensor Top view dual sensors 60o 60o 60o Fig.12 Fig.11 Side view single sensor Max visual range: 10m 35o Height: Between 2m – 2.4m Fig.
UbiCapture WA Fig.14 Top view Fig.15 Side view Max visual range: 7m Height: Between 2m – 2.4m 73o Fig.16 45o Footfall distance range Min 3 m - Max 7 m Blind zone Fig.17 HD Fig.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
translation. Max power: BT:9.28dBm 2.4G wifi: 16.74dBm Tx Frequency: Wi-Fi: 2412MHz~2472MHz 5180MHz~5240MHz 5725MHz~5875MHz Bluetooth: 2402MHz~2480MHz Rx Frequency: Wi-Fi: 2412MHz~2472MHz 5180MHz~5240MHz 5725MHz~5875MHz Bluetooth: 2402MHz~2480MHz BT and WIFI can be used in Europe without restriction.