Ca r p o - T E0 0 R 0 0 Use r Gu i d e Ve r s i o n : 1 .
C arpo- T E 00R 00 User Guide Introduction 1. Please read t hese safet y inst ruct ions carefully. 2. Please keep t his User ’s Manual for lat er reference. 3. Please disconnect t his equipm ent from connect er before cleaning. Don’t use liquid or prayed det ergent for cleaning. User m oist ure sheet or clot h for cleaning. 4. Make sure t he equipm ent s are connect ed t o t he power source wit h t he correct volt age, frequency, and am pere. 5.
C arpo- T E 00R 00 User Guide 9. Caut ion on use of bat t ery: User t he bat t ery recom m ended by t he m anufact urer or t he sam e t ype of bat t ery inst alled by t he m anufact urer. I f incorrect bat t ery is used, it m ay cause explosion or fire hazard. Recycle or discard used bat t eries according t he m anufact urer ’s inst ruct ion or your local aut horit y. 10. The com put ers use nonvolat ile m em ory t hat requires a bat t ery t o ret ain syst em inform at ion when power is rem oved.
C arpo- T E 00R 00 User Guide Replace only wit h sam e or equivalent t ype recom m ended by t he m anufact urer. Discard used bat t eries according t o t he m anufact urer ’s inst ruct ions. FCC Com plia n ce St a t e m e n t This equipm ent has been t est ed and found t o com ply wit h t he lim it s for a class B digit al device, pursuant t o part 15 of t he FCC Rules. These lim it s are designed t o provide reasonable prot ect ion against harm ful int erference in a resident ial inst allat ion.
C arpo- T E 00R 00 User Guide FCC Ca u t ion : Any changes or m odificat ions not expressly approved by t he part y responsible for com pliance could void t he user's aut horit y t o operat e t his equipm ent . FCC RF Ra dia t ion Ex posur e St a t e m e n t : 1. This Transm it t er has been dem onst rat ed co- locat ion com pliance requirem ent s wit h Wi- Fi, Bluet oot h SiP ( Syst em in Package) m odule.
C arpo- T E 00R 00 User Guide < < < < EN 55022: 2006 + A1: 2007 EN 61000- 3- 2 : 2006 EN 61000- 3- 3 : 1995 + A1 : 2001 + A2 : 2005 EN 55024: 1998 + A1: 2001 + A2: 2003 ( I EC 61000- 4- 2: 2008; I EC 61000- 4- 3: 2006 + A1: 2007; I EC 61000- 4- 4: 2004; I EC 61000- 4- 5: 2005; I EC 61000- 4- 6: 2003 + A1: 2004 + A2: 2006; I EC 61000- 4- 8: 1993 + A1: 2000; I EC 61000- 4- 11: 2004) < EN 60950- 1: 2001 Safet y of inform at ion t echnology equipm ent < EN 300 328 V1.7.1: 2006 < EN 301 489- 17 V2.1.
C arpo- T E 00R 00 User Guide net work services. < This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
C arpo- T E 00R 00 User Guide Table of Contents Introduction ........................................................... 0 Chapter 1 General Information ............................. 0 1.1. Introduction ..........................................................................................0 1.2. Specification.........................................................................................0 1.2.1. Main System ........................................................................................
C arpo- T E 00R 00 User Guide 1.3. Packing List ..........................................................................................0 1.4. Dimensions...........................................................................................0 Chapter 2 System Setup ....................................... 0 2.1. Exploring Your Carpo-TE00R00..........................................................0 2.1.1. The front side of the Carpo-TE00R00 .................................................. 0 2.1.2.
C arpo- T E 00R 00 User Guide 2.3.3. Menu Controls...................................................................................... 0 Chapter 3 Using the Carpo-TE00R00 ................... 0 3.1. Introduction ..........................................................................................0 3.2. Using the USB Ports ............................................................................0 3.3. Using the External Audio System.......................................................0 3.4.
C arpo- T E 00R 00 User Guide Ch a p t e r 1 General Information 1.1. Introduction Carpo-TE00R00 semi-rugged tablet PC is TI Cortex-A8 DM3730 1.0GHz processor core architecture based Semi-rugged Tablet PC with a bright 10.1-inch LED backlight LCD display. The powerful CPU brings the most dynamic applications to life without sacrifices to any industrial reliability. Delivery a variety of connectivity features, built-in USBs, Microphone and Headphone port. It is ideal for an all-around system performance.
C arpo- T E 00R 00 User Guide z z MPU : < TI Cortex-A8 DM3730 1.0GHz < Processor packing : Micro-FCBGA < Cores : Single Core < On-die L2 Cache : 256KB Graphics : < z System Memory : < z z < Panel size : 10.
C arpo- T E 00R 00 User Guide z z Communication : < 1 x Wireless IEEE 802.11 b/g/n < 1 x Bluetooth 2.1 + EDR Webcam : < Front Bezel: 1.3 Mega-pixel Camera audio input (Microphone) functions. < Rear Bezel: 2 Mega-pixel Camera, LED auxiliary light. 1.2.2. I/O Interface z z External I/O : < 2 x USB 2.
C arpo- T E 00R 00 User Guide z < Navigation Buttons : 5+ Way navigation button with integrated enter button < Program Function Buttons : 5 x Function keys (Programmable) < Barcode Buttons : 2 x Trigger Buttons (Programmable) Sensor : < 1 x Light Sensor 1.2.4. Power Management z z Power Adapter : < AC to DC, 19VDC@3.42A, 65W < AC 100V ~ 240V, 50~60Hz input < 19 DC-in Battery (Internal Battery) : < Internal Smart Lithium Polymer Battery, 3800mAh 1.2.5.
C arpo- T E 00R 00 User Guide < z z Operating : SD (MIL-STD-810G Method 514.6 Category 4 Fig 514.6C-3) Mechanical Shock : < Operating : 20g, 11ms, Terminal sawtooth < Non-operating : 40g, 11ms, Terminal sawtooth (MIL-STD810G Method 516.6 Procedure I) Water/Dust Resistance : IP54 equivalent 1.2.6. Material z Chassis : < z Enclosure : < z PC/ABS Plastic, PC/ABS and TPU Double Injection with Protective Rubber Grips Set Dimension (W x H x D mm) : < z Semi-Rugged Tablet PC Slate 277.
C arpo- T E 00R 00 User Guide < z z CE (EN60950-1) RF : < FCC part 15 subpart C < ETSI (EN300 328 / EN301 489-1 / -17) SAR : < FCC SAR (OET 65 C) < CE SAR (EN62311) 1.2.9. Optional: Internal Module z TPM : < 1 x Compatible with TPM1.2 1.2.10.
C arpo- T E 00R 00 User Guide z GPS : < < Channel : 50 channel all-in-view tracking 1 x Double Color LED (Red & Blue) OS : z z Win CE 6.0 support Desktop Docking : < Win CE 6.0 : 4 x USB2.0 type A, 1 x Ethernet, 1 x Kensington and 1 x DC Jack support < Android 2.3 : 4 x USB2.
C arpo- T E 00R 00 User Guide D ACC power cord (option) Vehicle Mounting Bracket Charger : D 75 x 75/100 x 100mm Vesa Mount Holes support D 6VDC to 36VDC Input; 19 V@13.42A Max., total output 65W D Cigarette lighter plug power cord D ACC power cord (option) Vehicle Mounting Bracket : D 75 x 75/100 x 100mm Vesa Mount Holes support 1.2.11.
C arpo- T E 00R 00 User Guide 1.3.
C arpo- T E 00R 00 User Guide 0
C arpo- T E 00R 00 User Guide 0
C arpo- T E 00R 00 User Guide Ch a p t e r 2 System Setup 2.1. Exploring Your Carpo-TE00R00 Before starting to set up the Carpo-TE00R00, take familiar with the locations and purposes of controls, drives, connectors and ports, which are illustrated in the figures below. When placed upright on the desktop, the front panel of the Carpo-TE00R00 appears as shown in Figure 2.1. 2.1.1. The front side of the Carpo-TE00R00 The front side of the Carpo-TE00R00 is equipped the I/O as described below.
C arpo- T E 00R 00 User Guide 1. Cam era/ 1.3 Mega- pixel 3. LED Power / St orage/ Wi- Fi 5. Barcode But t on 7. RFI D 9. Program Funct ion But t ons z z 2. Digit al Microphone 4. Light Sensor 6. Navigat ion But t ons 8. User I nt erface But t on 10. Barcode But t on Camera/1.3 Mega-pixel The built-in camera can be used as a communication device for allowing you to capture images, record videos, and have video chats. It is 1.3M pixels and transmitting instant image through network for conference.
C arpo- T E 00R 00 User Guide z z < Lights green when the system is powered on and battery is fully charged. < Lights blinking green when the system is in S3 Suspend. < Lights orange indicates that the battery is in charging. < Lights off when the battery is discharged or power off. < Lights blinking red when the battery power is low under 10%. Storage Access When LED in blue light indicates that the system is accessing the Storage Drive.
C arpo- T E 00R 00 User Guide This function lets you press the arrow keys to move the cursor up, down, right, or left on the screen, after that press Enter to execute the function. z z RFID Data/files transferring from the RFID-equipped or equivalent device to your Carpo System. This port only can receive data or files from other RFID-equipped or equivalent device.
C arpo- T E 00R 00 User Guide 2.1.2. Hotkey – F3 This function lets you go to the home screen directly. Hotkey – F4 This function lets you go to the previous screen. The rear side of the Carpo The rear side of the Carpo is equipped the I/O as described below.
C arpo- T E 00R 00 User Guide 1. Camera/2 Mega-pixel 2. SIM Card/Optional Accessories Door 3. External Battery Connector 4. 5. Speaker 6. Protective Rubber z z z Camera/2 Mega-pixel The built-in camera can be used as a communication device for allowing you to capture images, record videos, and have video chats. It is 2.0 M pixels and transmitting instant image through network for conference.
C arpo- T E 00R 00 User Guide z z Speaker Integrated left and right mini stereo speakers for sound and audio output for your multimedia presentations or listening pleasure. Protective Rubber To prevent system harm from vibration or shock, the system has been designed with installing four protective rubber at the four corner. 2.1.3. The right side of the Carpo The right side of the Carpo is equipped the I/O as described below. z 0 1. Microphone port 2. Headphone port 3. USB port 4.
C arpo- T E 00R 00 User Guide Allows you to connect an external microphone for monophonic sound recording directly into your Tablet PC. z Headphone Port Lets you plug in a stereo headphone, powered speakers, or earphone set for personal listening. z USB Ports (x2) The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your Tablet PC. 2.1.4. z The left side of the Carpo 1. Power But t on 2. Lock But t on 3.
C arpo- T E 00R 00 User Guide When you power on the system, the screen appears with the lock mode, please touch and drag the unlock bar to top end to unlock the system, then the home screen appears. When you press the power button in one second, the system will go to Suspend Mode. When you press the power button in 8 seconds, the system will power off. When you press the power button in 2 seconds, the system will pop-up the phone options as indicated in the following graphics.
C arpo- T E 00R 00 User Guide To make the system back to work, press and drag the unlock bar to the top of the screen, the screen will go to the home screen for your execution. z Wi-Fi Button Press this button to set your Wi-Fi function.
C arpo- T E 00R 00 User Guide z DC-Jack Lets you connect the AC power adapter in supplying continuous power to your Tablet PC and recharging the battery. 2.1.5. The bottom side of the Carpo 1. Docking Connect or z Docking Connector Lets you connect the system to docking stand to dock the tablet PC when you are at home or office desk. 2.2. Preparing for Installation Your Carpo is designed and pre-configured for easy setup and use.
C arpo- T E 00R 00 User Guide 2.2.1. Installing the Rubber Bumpers To protect the housing case of Carpo-TE00R00, install the rubber bumpers. 1. Place the Carpo-TE00R00 to rear side and install the rubber bumpers to the 4 corners of the system. 2. Screws the rubber bumpers to fix them securely into the system. 2.2.2. Removing the Rubber Bumpers To remove the rubber bumpers, please place the system to rear side and unscrew the rubber bumpers of the tablet PC. 2.2.3.
C arpo- T E 00R 00 User Guide also has an auto-switching design that can connect to any 100VAC ~ 240VAC power outlets. To connect the power adapter: 1. Plug the AC adapter connector to the DC-Jack socket on the left side of the system. 2. Plug the power cord to the AC adapter. 3. Plug the other end of the power cord to a live wall outlet, at the same time, the Power LED at face panel lights up green.
C arpo- T E 00R 00 User Guide the total current load of all the connected devices. -- Remove all power from the device prior to installing or removing any accessories, hardware, or cables -- Before cleaning the system, make sure it is disconnected from any external power supplies (i.e. AC adapter). 2.2.4. Starting Your System The Power/Resume button is found on the left side of the Tablet PC. Press the Power/Resume button to start your system and check that if the Power LED turns on.
C arpo- T E 00R 00 User Guide 2.2.5. Connecting the keyboard and mouse Before setting up the system, please make sure the following items are available. z Keyboard z Mouse (for system software installation) A keyboard is an input device; a mouse is a pointing device. Please connect these two devices as graphics shown below to interact with your system.
C arpo- T E 00R 00 User Guide 2.3. Using Your Android Operating System The operating system is the software foundation for your computer. It is the platform for all your software application programs to run on. The computer comes with an operating system pre-installed and no need to be setup during initial use. 2.3.1. Application Control The system home screen encoded with “Program Hotkey Utility”, that provides you plenty of applications and games to enjoy the full excitement of Android world.
C arpo- T E 00R 00 User Guide 2.3.2. Screen Hotkey Utility for function controls The Carpo-TE00R00 allows you to view the screen with different angles (0º, 90º or 270º) but still keep the screen face to you. To do so, please position the screen face to you and rotate it with clockwise 90º or 270º each time, the G sensor will recognize and rotate the screen. This system has a number of function controls on the screen for preprogrammed with special functions.
C arpo- T E 00R 00 User Guide Adding to Home Screen This utility lets you add versatile functions and applications to the home screen.
C arpo- T E 00R 00 User Guide Managing Application This utility lets you manage all executing programs, clear data, or un-install application. Wallpaper Selecting This utility lets you select wallpaper with default setting as Gallery, live wallpaper, or wallpapers. Searching Function This utility lets you search system application or any information from Google.
C arpo- T E 00R 00 User Guide Status Notification This utility shows you system status or any coming message. System Setting This utility lets you configure system parameter for specific function.
C arpo- T E 00R 00 User Guide Ch a p t e r 3 Using the Carpo- TE00R00 3.1. Introduction This chapter describes the basic features and procedures for using the panel PC. It includes the I/O ports connecting and the touch screen operation. 3.2. Using the USB Ports USB (Universal Serial Bus) is a hardware interface that enables you to connect multiple devices (such as printers, mice, keyboards, storage devices, joysticks, digital cameras, and video conference cameras, etc.
C arpo- T E 00R 00 User Guide fully backward compatible, you will be able to use a USB 1.1 device in a USB 2.0 compliant system. 1. Connect the external device to the system. 2. The USB ports support hot plug-in connections. Install the device driver before using the device. 3.3. Using the External Audio System At the right side of your Tablet PC, you will find the built-in audio ports for connecting Microphone jacks, earphone or powered speaker. To connect to an audio jack: 1.
C arpo- T E 00R 00 User Guide 3.4. Installing the Battery Carpo-TE00R00 provides optional external battery to extend the power of your system. For installing the battery pack, please follow the steps below: 1. Turn off the system. 2. Align the hook wall at the rear side, then place and screw it fixedly. 3. Remove the cover of the external battery connector (as marked n below) and place it on the lower position (as marked o below).
C arpo- T E 00R 00 User Guide 4. Snap the battery pack into the external battery connector and hook into the hook wall securely. For removing the external battery, repeat the above steps in reverse order to remove the battery. 3.5. Using a Barcode Scanner Module (optional) Your Carpo-TE00R00 is designed with equipped the optional Barcode Scanner module. Before installing the barcode scanner module, please switch the DIP 1/2 to “ON” and DIP 3/4 to “OFF” as indicated in the following graphics.
C arpo- T E 00R 00 User Guide To install the Barcode Scanner Module: 1. Make sure the system is turned off. 2. Unscrew the compartment cover on top of the system. 3. Screw the Barcode/MSR transfer board into the mainboard.
C arpo- T E 00R 00 User Guide 4. Attach the Barcode Scanner connector to the connectors inside the compartment. 5. Screw to secure the Barcode Scanner module onto the system. Barcode Scanner Module 3.6. Using a MSR Module (optional) Your Carpo-TE00R00 is designed with equipped the optional MSR module.
C arpo- T E 00R 00 User Guide 1/2 to “ON” and DIP 3/4 to “OFF” as indicated in the following graphics. To install the MSR Module: 1. Make sure the system is turned off. 2. Unscrew the compartment cover on top of the system. 3. Screw the Barcode/MSR transfer board into the mainboard.
C arpo- T E 00R 00 User Guide 4. Attach the MSR connector to the connectors inside the compartment. 5. Screw to secure the MSR module onto the system. MSR Module 3.7. Using the Docking Stand (optional) Carpo-TE00R00 provides optional of docking stand for you to dock this system when you are at your home or on your office desk.
C arpo- T E 00R 00 User Guide Docking Stand Docking Connector Attach the Carpo-TE00R00 to the docking stand by connecting the docking connectors both on the system and the docking stand.
C arpo- T E 00R 00 User Guide 3.7.1. The right side of the Docking Stand 1. USB port 2. USB port The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your Carpo-TE00R00. 3.7.2. The rear side of the Docking Stand The rear side of the docking stand provides the following ports and connectors as described below.
C arpo- T E 00R 00 User Guide 1. Locking Device Keyhole 2. USB port 3. USB port 4. DC- Jack z Locking Device Keyhole Lets you attach a Kensington security system or a compatible lock to physically secure your Carpo-TE00R00. z USB port This docking st and let s you use USB connect ors t o t ransf er dat a. z DC- Jack Lets you connect the AC power adapter in supplying continuous power to your system and recharging the battery.
C arpo- T E 00R 00 User Guide Ch a p t e r 4 Maintenance Your Carpo-TE00R00 needs occasional cleaning to prolong their life. Please read this section carefully to ensure proper care of Carpo-TE00R00. When it is necessary to clean it, use a soft, lint-free cloth, slightly dampened with a mild detergent solution or use the contents of any commercially available computer cleaning kit. Never use petroleum-based solvents, or harsh detergents to clean the system.
C arpo- T E 00R 00 User Guide z Dispose of used batteries according to local regulations. 4.2. Maintaining the LCD Display z z z z Do not scratch the surface of the screen with any hard objects. Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device. Do not place anything, such as food and drink, on the screen at any time to prevent damage to the screen.