User's Manual

Power Bank
Warranty
At Ubio Labs, we are dedicated to designing
and manufacturing products with superior
performance and 100% customer satisfaction.
All of our products come with a 1 year limited
warranty from date of purchase.
We are always improving our products’ features
and functionality. We reserve the right to
change product specifications at any time
without notice.
DO NOT RETURN TO
THE STORE
Our customer service team is here to help.
www.ubiolabs.com
[e-mail]
1-866-642-4428
(Monday - Friday 9am - 4:30pm PST)
2821 Northup Way, Suite 250
Bellevue, WA 98004
SAVE THESE INSTRUCTIONS
Technical Specifications
iPhone, Apple Watch, and AirPods are a trademark of Apple
Inc., registered in the U.S. and other countries.
Component: PWB1119
Input: Lightning Input 9W 5V / 1.8A
Output 1: Qi (7.5W / 5W)
Charge Indicator: White/amber LED indicator
Dimensions: 4.76 x 2.36 x 0.50 inches
Weight: 5.29 oz.
Your wireless pad is designed to provide optimal
power delivery for your wireless device:
• 7.5W wireless charging for iPhone X Max, iPhone
X, iPhone X, iPhone X, iPhone 8, iPhone 8 Plus
• 5W wireless charging for AirPods wireless charging
case and other compatible devices
1 ) Qi Wireless Surface
2 ) Lightning Input
3 ) LED Charge Indicator
4 ) Wireless Charge Indicator
IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
1
2
4
3
Features
User Manual and
Safety Instructions
Important Safety Instructions
WARNING - When using this product, basic
precautions should always be followed, including the
following:
a) Read all manufacturers instructions before using this
product.
b) To reduce the risk of injury, close supervision is
necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose wireless pad to moisture,
rain, or snow.
e) Use of a power supply or charger not recommended
or sold by wireless pad manufacturer may result in a risk
of fire or injury
to persons.
f) Do not use the wireless pad in excess of its output
rating. Overloaded outputs above rating may result in a
risk of fire or injury to persons.
g) Do not disassemble the wireless pad. Take it to a
qualified service person when service or repairs are
required. Incorrect reassembly may result in a risk of fire
or injury to persons.
h) Do not expose the wireless pad to fire or excessive
temperature. Exposure to fire or temperature above
122°F may cause explosion. The wireless pad’s working
temperature is ≤104°F.
i) Have service performed by a qualified repair person
using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the
following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Caution: The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Wireless Power Bank
3,000mAh Portable
Wireless Charger
PBB205 User Manual
Material 80G woodfree paper
Process: 1c/1c
k=100
FCC Warning Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
‐‐
Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and
receiver.
‐‐ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician
for help.
Note: The device can only operate when it is connected to
the power supply, and cannot be operate in the portable
c
ondition.