User's Manual

User Manual and
Safety Instructions
LED Charge
Indicator
Wireless Pad Features
Qi Wireless
Surface
SAVE THESE INSTRUCTIONS
Warranty
At Ubio Labs we are dedicated to
designing and manufacturing products
with superior performance and 100%
customer satisfaction. All of our products
come with a 1 year limited warranty
from date of purchase.
www.ubiolabs.com
[e-mail]
1-866-642-4428
(Monday - Friday 9am - 4pm PST)
2821 Northup Way, Suite 250
Bellevue, WA 98004
DO NOT RETURN TO
THE STORE
Our customer service team is here to help.
WARNING - When using this product, basic
precautions should always be followed,
including the following:
a) Read all manufacturers instructions before
using this product.
b) To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
c) Do not put ngers or hands into the product.
d) Do not expose wireless pad to moisture,
rain, or snow.
e) Use of a power supply or charger not
recommended or sold by wireless pad
manufacturer may result in a risk of re or
injury to persons.
f) Do not use the wireless pad in excess of its
output rating. Overloaded outputs above rating
may result in a risk of re or injury to persons.
Important Safety Instructions
NOTE: This equipment has been tested and
found to comply with the limits for a wireless
power charger, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment o and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the product. This equipment complies
with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment
should be installed and operated with minimum
distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.
Model: CHG1151
Input: AC 110-240V, 50-60 Hz
Output: 37.5W 15V2.5A DC
Dimensions: 2.28 x 2.28 x 1.06inches
Weight: 4.1 oz.
Technical Specifications
Wall Adapter Features
At Ubio Labs, we are always improving
our products’ features and functionality,
we reserve the right to change
specications at any time without notice.
Technical Specifications
Model: AWC1102
Input: 37.5W 15V / 2.5A DC
Output: Wireless：15W Qi / 10W / 7.5W / 5W
UsbA: 5V 2.4A
Compatibility: Apple, Android, other devices
with wireless charging
Charge Indicator: White/amber LED indicator
Dimensions: 2.2 x 2.2 x 4.2 inches
W eight: 10 oz.
g) Do not disassemble the wireless pad. Take
it to a qualied service person when service or
repairs are required. Incorrect reassembly may
result in a risk of re or injury to persons.
h) Do not expose the wireless pad to re or
excessive temperature. Exposure to re or
temperature above 122°F may cause explosion.
The wireless pad’s working temperature is
≤104°F.
i) Have service performed by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
Wireless
Charging Stand
DC
Power In
Your wireless pad is designed to provide
optimal power delivery for your wireless device:
10W Qi certified fast charging for
Samsung Note9, S9+, S9, Note8, S8+, S8,
S7 Edge, S7, S6 Edge, S7, S6 Edge, S6, Note5,
LG G6, LGV30, Sony Xperia XZ2
• 7.5W Apple wireless charging for
iPhoneX
, iPhoneX
Max, iPhoneX ,
iPhone X, iPhone 8, iPhone 8 Plus
• 5W charging for other compatible
wireless charging devices
User Manual
AWC1102
USBA
Power out
Folding
Wall Prongs
6 Ft. Cable
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation,Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device
The distance between user and products should be no less
than 10cm
ADVERTENCIA IC
Cet appareil contient des émetteurs / récepteurs exemptés
de licence conformes aux RSS (RSS) d'Innovation, Sciences
et Développement économique Canada. Le fonctionnement
est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y
compris celles susceptibles de provoquer un fonctionnement
indésirable de l'appareil.
Cet émetteur ne doit pas être co-localisées ou opérant en
conjonction avec une autre antenne ou transmetteur.Pour se
conformer aux exigences d'exposition aux radiofréquences,
une distance minimale de 10cm doit être maintenue entre le
corps de l'utilisateur et le combiné, y compris l'antenne.
Les pinces de ceinture, les étuis et autres accessoires
similaires utilisés par cet appareil ne doivent pas contenir de
composants métalliques. Les accessoires portatifs qui ne
répondent pas à ces exigences peuvent ne pas se conformer
aux exigences d'exposition RF et doit être évitée. Utilisez
uniquement l'antenne fournie ou une antenne approuvée