PACKAGE Li Gt a O80 English 1. Dee 2. Bracket 3. Adhesive Tampa USB Cable 5. User Manual * Please note, only 4-wire cable as we provided can support data transmission, Some other cables may not work when connecting the PC Tools.
DEVICE OPERATIONS English TO CHECK IF THE DEVICE IS ON or OFF Press the button once. If the device is an, the device will beep and usually the indicator will flash green. If it doesn't beep, the device is off. «Switch on To switch the device on, press and hold the button for 3 seconds. The device will beep once and the Indicator will start blinking green. Release the button and the Indicator wil turn off after a couple of seconds. The device is naw an.
DEVICE OPERATIONS English seconds. The device will beep after 3 seconds and again after and the indicator will start flashing alternately red and green. Release the button at this point. NB your device will automatically enter WiFi setup mode the first time It is switched on or following a reset. + Reset to default settings Switch the device off. Now press and hold the button for at least 15 seconds. Release the button when you hear the 3rd beep and when the Indicator Is constantly flashing red.
DEVICE OPERATIONS «Manual data synchronization When the device is switched on, press the button once to trigger manual data synchronization. The indicator will flash green while the data is being transferred. If the server cannot be contacted, the indicator will flash red once.
MO LINTING INSTRUCTIONS English Method 2: Hanging up Ste pl Step CARING FOR YOUR DEVICE Please follow the Instructions In this manual ta drapery configure and operate: the device. @ The device Is not waterproof. Please keep away from water during operation, storage and shipping. For using outboard or in extreme conditions, please contact us or our distributors for Inks of external waterproof probe. Soap sway farm acidic, compelling, flammable or plosive substances. {6 Mount the device on a stable surface.
DEVICE SETUP OPTIONS English Option 1: Using mobile App STEP 1 Download the App from or Search for “Ubiquity” on the App Store or Google Play. Please follow the on-screen instructions for step by step guidance. If you failed to set up via the app, you can also try with the PC Tools, which Is more professional but leaser to operate. STEP 2. Launch the App and log In. On the home page, tap the to start adding your device. Then please follow the in-app instructions to complete the setup.
DEV CE SETUP OPTIONS English Option 2: Using PC Tools STEP 1. Download the tool from This tool Is also helpful In checking setup allure reasons, MAC address, and offline charts. You can also use Tt to export offline data stored in the device internal memory. STEP 2 Launch the App and log in. With the device switched on, use the Micro USB cable provided to connect your device via Micro USB port to the computer. The Tools will automatically scan your device and enter device page. STEP 3.
DEVICE SETUP OPTIONS English wean Ok thinners eo Sau Tks ee Oli wean TE stern After setting up, you can view the sensor readings as well as configure your device via our app and web console You can find and watch the demonstration videos of creating alert rules, setting data sync: interval at
TECH CAL SPECIF CATIONS English me Batteries: 2 x AA {alkaline battery recommended, not Included) && Ports: 1x Mini USB, 1x Micro USB a Built-in memory: 300,000 sensor readings Ht WiFi frequency: 2.
TROUBLESHOOTING Eris 1. Failure to setup the device via the Ubiquity App There are several factors that wil affect the setup process. The followings are common Issues: a) WIFI setup mode: make sure you turn on the WIFI setup mode. (The device indicator flashes alternately red and green). b) WiFi frequency: The WS1 can only connect to 2.4GHz networks, channels 1-13. o] 246Hz i €} WiFi password: Go through the WiFi setup again to ensure that you have set the correct WiFi password.
TROUBLESHOOTING English €) WiFi channel width: Make sure it is set to MHz or "Auto". #) Battery problems: WiFi uses a lot of power. Your device may be tabla to power on but may not have enough power for the WIFI. Try replacing the batteries. g) Try with the PC Tools. This tool Is much leaser to operate and can rectum specific ears. 2.
TROUBLESHOOT NG English measurement location (Recommended). b) Use your mobile phone and enable Interment Connection Sharing. This ean work well In situations where your devices are installed in an area with limited or no WiFi coverage. ¢} Use a laptop and the Micro USB cable to connect to the device manually. You can now perform a data export to your computer using the PC Tools. 3. Failure to sync data Please check the following things: a} Check that the device is powered on.
TROUBLESHOOTING English device to USB power or change a new pair of batteries, then press the power button to manually sync data. ©) Make sure your device's WIFI router has a working Internet connection (for Instance, try to access www.ublbot.com using a mobile connected to the same WiFi). )o-cob-@ d) Check that the WiFi connection is working properly, if need be, go through the Wii setup again.
TROUBLESHOOTING Engine 4. The PC Tools failed to recognize the device a) Please check If you are using the USB cable provided In the packaging. Some other USB cable Is not 4-wire which cannot offer data transmission. b) Please remove the splutter if there is one connected. TECHNICAL SUPPORT The Ubiquity team is glad to hear your voice of our products and services. For any questions or suggestions, please feel free to create a ticket in the Ubiquity app.
LIMITED WARRANTY English 1. This device Is warranted to be free of defects In materials and workmanship for a period of up to one year from the original purchase date. To claim under this limited warranty and to obtain warranty service, please contact customer service or local distributor to obtain instructions on how to pack and ship the product to us. 2. The following situations will not be covered by the warranty: @ Issues arising after the warranty period has ended.