Installation Instructions

Your beacon

Dashboard installation

Connect your beacon to its base

Center on dashboard with

logo facing out, so the screen

is visible to riders.

Peel sticker off the bottom

and press firmly to dashboard.

Plug in beacon using the car

charger.

Bluetooth pairing

What’s inside

Magnetic base USB cable Car chargerBeacon

Logo Screen

Make sure your Driver app is

up-to-date.

Turn on your phone’s

bluetooth.

Make sure your breacon is

connected to power.

Go to Account > Beacon in the

app to pair.

Questions?

Visit uber.com/beacon

PAGE 1
Your beacon Questions? Visit uber.com/beacon What’s inside Beacon Logo Magnetic base USB cable Car charger Screen Dashboard installation 1 Connect your beacon to its base 2 Center on dashboard with logo facing out, so the screen is visible to riders. 3 Peel sticker off the bottom and press firmly to dashboard. 4 Plug in beacon using the car charger. 3 Make sure your breacon is connected to power. 4 Go to Account > Beacon in the app to pair.
PAGE 2
The fine print FCC Statement IC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.