U S E R’S M A N U A L C2104001 BCM 43224 WiFi Card Contents SECTION ONE: INTRODUCTION ............................................................................................ 3 1. INTRODUCTION ............................................................................................................................... 3 1.1 SCOPE ........................................................................................................................................... 3 1.2 FUNCTION ........
PRODUCT SPECIFICATION ........................................................................................................... 4 2.1 HARDWARE SPECIFICATION .......................................................................................................... 4 3. PRODUCT REQUIREMENTS......................................................................................................... 4 3.1 HARDWARE REQUIREMENTS......................................................................................
HON HAI PRECISION IND. CO., LTD. Section One: Introduction 1. Introduction Project Name: 802.11a/b/g/n (2x2) card based on IC BCM43224 with BGA package. The typical use model for this embedded device is to allow the client device to be connected to an 802.11a/b/g/n 2x2 wireless network with infrastructure mode or to serve as an ad-hoc (peer-to-peer) data path. 1.1 Scope The Wireless BCM43224 is an available 11n solution in the 2.4/5GHz band, compatible with the IEEE 802.11a/b/g/n. The 802.
HON HAI PRECISION IND. CO., LTD. 2 Product Specification 2.1 Hardware Specification Wireless LAN Standards Operating Frequency WLAN Data Rate IEEE 802.11 a/b/g/n 2400~2483.5MHz, 5150~5250MHz, 5725~5850MHz 802.11a/g: 54Mbps with fall back of 48, 36, 24, 18, 12, 9, 6Mbps. 802.11b: 11Mbps with fall back rates of 5.5, 2, and 1Mbps 11n: MCS8~MCS15 Transmitter Output Power Typical 10.0dBm(AV) Typical 15.5dBm(AV) Typical 15.5dBm(AV) Typical 14.5dBm(AV) Typical 13.
HON HAI PRECISION IND. CO., LTD. Antenn Antenn ASM3053755T-510 3 ASM3053755T-510 3 1.2 XTAL 20MH BCM43224/CPU/P A BUCK MP2120 3.3 PCI-E I/O PIN DEFINE PIN SIGNAL NAME 2 3 4 9 10 11 13 15 18 21 22 23 25 26 27 29 31 33 34 35 40 44 50 52 54 3.3V WPS status GND GND WPS status REF CLKREF CLK+ GND GND GND PCIE-Reset PERn0 PERp0 GND GND GND PETn0 PETp0 GND GND GND WLAN Activity GND 3.
HON HAI PRECISION IND. CO., LTD. others Reserved 4 FCC Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HON HAI PRECISION IND. CO., LTD. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID:XCNC2104001”.