BTSID1 BTSMP1 Bluetooth beacon and sensor Quick Manual v1.
CONTENT Introduction 3 Know your device 4 Configuration 6 Mounting recommendations 10 Product information 12 Certification 15 Safety information 16 Warranty 17 Warranty disclaimer 18 Quick Manual v1.
INTRODUCTION This document provides short instruction how to configure BTSID1 Beacon or BTSMP1 Senor and FM tracker. During the use if you will have any questions or suggestions for improvement please feel free to contact yours Teltonika account manager or write to technical support team over VIP helpdesk. Wireless solutions open up new horizons for your business and help to keep an eye on your assets.
KNOW YOUR DEVICE MOUNTING HOLES MEMBRANE ONLY WITH BTSMP1 SENSORS Quick Manual v1.
What you get: • Bluetooth BTSID1 Beacon or BTSMP1 Sensor designed for easy & fast configuration and integration. • Quick Manual • Mobile application for Android and iOS* phones. Configure, scan, and update anytime anywhere with a EYE APP - Teltonika. *iOS doesn’t show devices with iBeacon protocol Quick Manual v1.
CONFIGURATION Devices work constantly and are ready to perform out of the box. Default basic Eye Beacon and Sensor settings are set to: • Transmitting at 2 dBm power. • Data advertising at 3 second intervals. • Eddystone protocol If you would like to change these settings you will need to: 1) Download and install EYE APP - Teltonika application to change sensor settings.
Devices in view: 1 Short list On/Off 2 Detailed view On/Off 3 Search In this window you will see all visible devices. You have options to see devices in Short list (1) or in default list. When looking at devices in default list you will be able to open Detailed view (2) of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search (3) function to filter search options.
Overview window 1 Device details 2 Firmware version 3 Device configuration In overview window you can see device details (1), check firmware version and update if available (2), go to device configuration settings. If you select to Configure (3) device new window will open with Basic and Advanced settings. Quick Manual v1.
Configure window Configure Basic Settings 2 Configure device broadcasted name 2.1 Configure signal strength 2.2 Configure device advertising interval 2.3 Packet settings 2.4 1 Save configuration 3 Select to configure Advanced settings. In this window you can check and change device configuration settings. In main tab Basic Settings (1) you can change main settings. Change Device name (2.1), Power signal strength (2.2), Advertising interval (2.3) and Packet (2.4) transmition type.
MOUNTING RECOMMENDATIONS 1 Placing: Directly place the monitor on the surface such as table, shelf 2 Using the adhesive sticker: Remove the release liner from one side of the adhesive sticker to stick it on the back of the device, then remove the release liner from the other side to stick it at the desired place on the wall 3 Using screws: Place device on the surface and secure it to the surface using two screws Quick Manual v1.
4 Ziptie: Lead ziptie thru both device holes and around an object you want device secured to 5 Hanging: Attach lanyard’s snap hook to one of the holes Note: Adhesive sticker, screws, lanyard, zipties are not included and sold separately Quick Manual v1.
PRODUCT INFORMATION Dimensions and weight Dimensions 56,6 x 38 x 13 mm (L x W x H) Weight 18 grams Technical specifications Model CR2450 CR2450 Type Lithium, Manganese Dioxide (Li/MnO2) Lithium, Manganese Dioxide (Li/MnO2) Total Capacity 600 mAh 600 mAh Replaceable No No Battery life (Tx=2 dBm; interval: 3 s) 5+ years 2.
Technical specifications Sensitivity -88 dBm -88 dBm Material Plastic Plastic Colors Black Black Protection IP67 IP67 Mounting Two holes to screw/ leash/strip, tape Two holes to screw/ leash/strip, tape Custom logo upon request* Custom logo upon request* * Special conditions * Special conditions -20°C / +60°C (-4°F / +140°F) -20°C / +60°C (-4°F / +140°F) *Possible to have -40°C / + 85°C (-40°F / +185°F) *Possible to have -40°C / + 85°C (-40°F / +185°F) Certificates CE RED (EU) FCC
Technical specifications Accuracy ±1.8 (typ.) @30-70% RH ±2 (typ.) @0-30% RH and @70-100% ±1.8 (typ.) @30-70% RH ±2 (typ.) @0-30% RH and @70-100% ±3.5 (max.) @30-70% RH ±4 (max.) @0-30% RH and @70-100% ±3.5 (max.) @30-70% RH ±4 (max.) @0-30% RH and @70100% ±0.2 (typ.) @0-60°C ±0.4 (typ.) @-20-0°C ±0.4 (max.) @0-60°C ±0.7 (max) @-20-0°C ±3.5 (max.) @30-70% RH ±4 (max.) @0-30% RH and @70-100% ±0.2 (typ.) @0-60°C ±0.4 (typ.) @-20-0°C ±0.4 (max.) @0-60°C ±0.
CERTIFICATION 15C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
SAFETY INFORMATION This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device! 1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package. 2. In case of malfunction contact yours Teltonika account manager or write to technical support team over VIP helpdesk. Quick Manual v1.
Opening and self fixing devices is strictly forbidden Installation and/or handling during a lightning storm is prohibited. All wireless data transferring devices produce interference that may affect other devices which are placed nearby. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The device must be connected only by qualified personnel.
WARRANTY TELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager. Contact us teltonika-gps.com/about-us/contacts/ WARRANTY DISCLAIMER TELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS WITH TRAINING AND EXPERIENCE.