Installation Guide

Made from ABS, US Trench Drain’s Pit Boss can be secured to the wall of the
Storm water catch basin using US Trench Drain’s Poly Adhesive SKU 20095
and the stainless steel screws. Once installed, 4” Triple wall, solid or
perforated pipe can be attached using Poly Adhesive SKU 20095
Choose the US Trench Drain storm water catch basin that suits your project, identify the installation
location that is required and dig a hole to suit. Mark out the location where pipe will be connected. Use a
4 5/16” hole saw to create the opening to suit the Pit Boss. Connect the Pit Boss using US Trench Drain’s
Poly Adhesive SKU 20095, and fix to the wall of the catch basin using the 4 x Stainless steel screws
(included) Con
nect the 4” Triple wall, solid, or perforated pipe to the pit Boss, securing, using US Trench
Drain’s Poly Adhesive, SKU 20095.
Place the grate into the storm water pit basin and backfill around the catch basin.
Ph: 774 233 0005