Installation Guide 3M Electronic Monitoring 3M™ Domestic Violence GPS Proximity Notification System Installation & Operation June 2017
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Information in this documentation is subject to change without notice and does not represent a commitment on part of 3M™ Electronic Monitoring. The software described in this document is subject to the license agreement that is included with the product, which specifies the permitted and prohibited uses of the product.
M Electronic Monitoring Versions and Changes Table Version Status/Changes Author Date 1.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Safety Information Please read, understand, and follow all safety information contained in these instructions prior to the use of this 3M Electronic Monitoring device. Retain these instructions for future reference. Intended Use This 3M Electronic Monitoring device is part of an electronic monitoring system, which performs data transfer using the PSTN or cellular network to a monitoring platform.
3M Electronic Monitoring WARNING To reduce the risks associated with hazardous voltage: Do not modify, decorate, or attempt to service the device. Return to 3M authorized personnel or location for repair or service. There are no user serviceable parts. If the device or power cord becomes damaged, contact the agency representative from which you are monitored. NOTICE Only authorized personnel can turn off or remove the device.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Safety information only for: Rechargeable Hand-held/wearable Devices Non Rechargeable Hand-held/wearable Devices WARNING To reduce the risks associated with fire or explosion: Do not enter areas with potentially explosive atmosphere. Potentially explosive areas are often, but not always, clearly marked.
3M Electronic Monitoring FCC Two-Piece GPS Tracking Unit and GPS Victim Unit contain FCC ID: XPYLISAU200 Base Unit FCC ID: LSQ-SBU2000433-2 FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT The equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Table of Contents 1 Introduction .......................................................................................................................................... 9 1.1 Two-Piece GPS Tracking Unit ..................................................................................................... 9 1.2 RF Transmitter ......................................................................................................
3M Electronic Monitoring 1 Introduction 3M Electronic Monitoring’s pioneering domestic violence deterrence solution is designed to offer law enforcement agencies the means to impose restraining orders more efficiently. The solution combines GPS tracking with cellular and RF communication in order to track the aggressor and alert the victim and monitoring center in the event of emergency.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Figure 2: RF Transmitter 1.3 GPS Base Unit The GPS Base Unit is an additional device that can be allocated to the aggressor in domestic violence deterrence programs. The GPS Base Unit is installed at the aggressor’s curfew location. On returning to the curfew location, the aggressor places the Two-Piece unit in the GPS Base Unit’s docking cradle. Placing the Two-Piece unit in the docking cradle is a condition of the home curfew.
3M Electronic Monitoring 1.4 GPS Victim Unit The GPS Victim Unit constantly tracks movement and location of the victim using GPS technology. Each time the GPS victim unit communicates with the monitoring system, it receives the aggressor’s last known location. Using this data, the unit calculates the proximity of the aggressor and alerts the victim if the aggressor is within a defined range.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 2 Before Installation Before leaving the monitoring center, check that you have the correct installation kit and the appropriate installation tools. In addition, verify that the offender is correctly registered in the 3M™ Web Offender Management Software application. 2.1.
3M Electronic Monitoring 3 Installing the Aggressor’s RF Transmitter Check that you have the following equipment items before you install the RF Transmitter: RF Transmitter (TX) and strap holder Electronic key (MRD) Locking tool Locking clips (male and female) 0.2” (5mm) flat head screwdriver – for opening the locking clip Snake eye screwdriver – for changing the straps of the RF Transmitter 3.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 4. Lay the long strap over the female part of the clip ensuring that the strap pins and the clip studs are protruding through the holes in the long strap (C). C 5. Slide the strap holder over the end of the long strap in order to hold the strap in place. 6. Move the RF Transmitter around the wrist or ankle to ensure that it fits comfortably. D 7.
3M Electronic Monitoring 4 Activating the Tracking Unit The activation procedure for the Two-Piece GPS Tracking Unit and the GPS Victim Unit are almost identical. Both types of tracking unit include an LCD and a five-button keypad are used to navigate the device’s menu-driven interface. To navigate the Two-Piece unit’s menus: Use and to scroll through menu options. Use to select the highlighted option. Use to navigate back to the previous menu. To activate the tracking unit: 1.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 6. Press to scroll to Using Wireless and press . The activation sequence begins. During the activation sequence, do not press any buttons on the Two-Piece unit. If you do press a button, the activation sequence will be canceled. The activation sequence is as follows: a. The Two-Piece unit calls the monitoring system to download the offender’s program details and the screen displays the message “Contacting Datacenter”. b.
3M Electronic Monitoring 7. When “Waiting for GPS” is displayed, take the tracking unit outside to a location with a clear view of the sky. 8. Hold the tracking unit upright and wait for the unit to acquire its location. The green bar fills to the right to indicate progress. When the GPS location is acquired, the tracking unit sounds a beep and displays the “Activation Successful” message with the current date and time. 9. Press to acknowledge.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 5 Configuring the Tracking Unit Local configuration of the tracker unit is performed via the tracking unit’s Officer menu. To access the Officer menu: Rapidly press the following button sequence: The Officer menu is displayed. The options available in the Officer menu are listed in the following table. Menu Option Description Vibrate/Beep Offers a choice of alert indication modes.
3M Electronic Monitoring 6 Installing the GPS Base Unit The GPS Base Unit is an optional device that is used together with the aggressor’s Two-Piece GPS Tracking Unit and serves the following purposes: Home Curfew – An inclusion zone around the aggressor’s home is defined in the system as a “Home Curfew” zone. A “Must Be In” schedule is defined for the offender during which the offender is required to be at home.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System Figure 6: Positioning the GPS Base Unit 6.2 Setting Up the GPS Base Unit The GPS Base Unit should be positioned horizontally on a hard, flat surface within easy reach of a power outlet and a telephone socket (if required). To set up the GPS Base Unit: 1. If you are connecting the GPS Base Unit to a land line, perform the following two steps: a.
3M Electronic Monitoring 2. Connect the power adapter to the nearest available power outlet. 3. Plug the other end of the supplied power adapter cord into the socket labelled 12VDC on the back panel of the GPS Base Unit. The GPS Base Unit includes an internal, rechargeable backup battery to provide power in the event of a power outage. The battery is charged automatically and is not controlled by the user. 4.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 7 Operating the Tracking Unit Inform the aggressor and victim regarding the following procedures and ensure that the offender understands how to operate the Two-Piece unit correctly. 7.1 Waking the Tracking Unit from Idle Mode If the tracking unit is inactive for 10 seconds, the unit enters Idle mode. To wake the tracking unit from Idle mode: Press any button. The Two-Piece unit wakes from Idle mode. 7.
3M Electronic Monitoring To exit the message list Press until you have returned to the main display. 7.4 Charging the Tracking Unit The tracking unit should be charged for at least two hours a day using the power adapter supplied. If the aggressor is using a GPS Base Unit, the Two-Piece unit can be charged by placing it in the docking cradle. 7.5 Phone Calls The tracking unit can operate like a cellular phone allowing the user to make and receive phone calls. 7.5.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System The following screen is displayed. 3. Use to increase the speaker volume or to decrease the speaker volume. 7.6 Specific Instructions for the Victim 7.6.1 Panic Alerts If the victim is being attacked, it is possible to send a Panic alert to the monitoring center. To send a Panic alert: Hold down and simultaneously for three seconds. While holding down the buttons, the tracking unit’s screen counts down three seconds.
3M Electronic Monitoring 8 Dismantling the Equipment Dismantling the equipment involves the following: Performing End of Service (when applicable). Packing the tracking unit. Removing, deactivating, and packing the aggressor’s RF Transmitter. If a GPS Base Unit is installed, removing and packing the GPS Base Unit. 8.1 Before Dismantling Before leaving the monitoring center, check that you have the following dismantling tools: 0.2” (5mm) flathead screwdriver – for opening the RF Transmitter clip.
Installation Guide: 3M™ Domestic Violence GPS Proximity Notification System 4. Pack the Two-Piece unit, the GPS Base Unit and their power adapters into their original carrying cases. 8.3 Removing the RF Transmitter After disconnecting and packing the Two-Piece equipment, remove the RF Transmitter from the offender. To remove the RF Transmitter: 1. Taking care not to damage or cut the strap, insert a screwdriver into the groove between the two parts of the locking clip and gentry pry apart.
