Integration Manual

ManualsBrandsu-blox Malmo ManualsElectronicsWireless Communication System Module

Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page

Andreas Nielsen 2009-01-15 cBProject-0901-09 1 (7)

Ärende / Subjekt Godkänd av / Approved by

Assemble Specification for cB-RBEPAi-02-0

Template update: 00-12-01

Assemble Specification for

cB-RBEPAi-02-0

Summary of content (7 pages)

PAGE 1
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref.
PAGE 2
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt Sida / Page 2 (7) Godkänd av / Approved by Assemble Specification for cB-RBEPAi-02-0 Table of content 1 2 Objective .................................................................................................................................3 Assemble overview.................................................................................................................4 2.
PAGE 3
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt Assemble Specification for cB-RBEPAi-02-0 1 Objective This document is a document for assembly of a cB-RBEPAi-02-0 product.
PAGE 4
Utfärdare / Issued by Datum / Date Andreas Nielsen 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt Sida / Page 4 (7) Godkänd av / Approved by Assemble Specification for cB-RBEPAi-02-0 2 Assemble overview 2.1 Bill of material (BOM) 2.1.1 Parts included in the design Mechanics, mounted PCB’s, connectors etc. The BOM is unique for every product. Document name: cB-0186 (cB-RBEPAi-02-0) BOM Document number: Document file: cBProject-0810-05 cB-0186 (cB-RBEPAi-02-0) BOM.
PAGE 5
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt Sida / Page 5 (7) Godkänd av / Approved by Assemble Specification for cB-RBEPAi-02-0 2.4 Mechanical assemble 1. Open the test program named "cB-2150" and select artnr cB-0186. 2. Enter your name 3. Press Login. 4. Attach the “EPA Tester” connector. 5. Start the production and test of the board by pressing "Start". Wait as long as the status field is YELLOW.
PAGE 6
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt 6 (7) Godkänd av / Approved by Assemble Specification for cB-RBEPAi-02-0 Figure 2 Label mounted on the plastic housing back Figure 3 Label mounted on the plastic housing side 9. The cB-RBEPAi-02-0 is ready for the next step.
PAGE 7
Utfärdare / Issued by Andreas Nielsen Datum / Date 2009-01-15 Beteckning / Ref. cBProject-0901-09 Ärende / Subjekt Sida / Page 7 (7) Godkänd av / Approved by Assemble Specification for cB-RBEPAi-02-0 2.5 Application download This step downloads the application firmware etc. to the unit. Document name: Document number: Document file: Document Revision: Application firmware: Application Revision: Time consumption [s]: 2.