Use and Care Manual

Small Size, Big Sound Button Diagram
What’s Included?
Charging
• SoundBoost Speaker
• Micro-USB Charging Cable
• User Guide
USB
Flash drive
Mode
Vol -/Previous song
Vol
+
/Next song
Play/Pause
TF/Micro
SDcard slot
Power ON/OFF
AUX line in
Micro-USB Port
Instructions
Setup
Music Control
MicroSD Card Mode
USB Mode
AUX Mode
Specifications Customer Support
Bring the party anywhere you go with the Tzumi
SoundBoost Speaker. This wireless mini speaker features
multiple ports for playing music and a convenient handle
to help carry it with you wherever you go. Easy on-device
controls, Bluetooth connectivity, and LED RGB lights
make it so you can play music and set the vibe in
seconds. Get more from your speaker with the Tzumi
SoundBoost!
• Compatible with Bluetooth, AUX, USB, and
TF/Micro-SD.
• Wireless music playback with clear bass and
high-quality audio.
• Convenient handle makes for easy transportation.
SOUND
BOOST
User Guide
1. Slide the power switch to turn the SoundBoost ON.
a. When first powered on, the SoundBoost defaults
to Bluetooth Mode, indicated by a voice prompt. All
other play modes will change automatically when
connected to the different audio sources.
2. Open the Bluetooth settings on the device you wish
to connect to the SoundBoost.
a. Search and select 'Tzumi SoundBoost', follow on
screen instructions to pair.
3. Once your device is connected, browse your
music library, and select a song to start playing
music through your SoundBoost!
4. To turn the SoundBoost OFF, slide the power switch
to the OFF position.
1. Insert a MicroSD in the TF card insert on the SoundBoost.
2. The SoundBoost will automatically search and play the
music stored on the MicroSD card.
3. Use the music control buttons on the SoundBoost to
play, pause, and skip audio on the MicroSD card.
1. Insert a USB flash drive into the USB port on the
SoundBoost.
2. The SoundBoost will automatically search and play the
music stored on the USB.
1. Plug either end of a 3.5mm AUX cable into the AUX
port on the SoundBoost.
2. Plug the other end of the 3.5mm AUX cable
into the AUX port of your device.
3. The SoundBoost will automatically switch to AUX mode.
a. The prompt “AUX input mode” will notify you it is
ready to play.
4. Music can only be controlled via your device
in this mode.
1. When the battery is low, the SoundBoost will notify
you with a “Battery low” prompt.
2. Plug the Micro-USB end of the charging cable into
the charging port on the SoundBoost.
3. Plug the USB end of the charging cable into a
USB power source,the speaker will begin to
charge, and a red LED indicator light located behind
the /V
+
button will light up.
4. The red indicator light will turn off when the
SoundBoost is finished charging.
1. Mode Button
a. Press to switch between Bluetooth, USB,
MicroSD, and AUX modes.
2. Previous/V- Button
a. Press to switch to the previous song.
b. Press and hold to lower the volume.
3. Play/Pause Button
a. Play or pause your music.
4. Next/V+ Button
a. Press to switch to the next song.
b. Press and hold to raise the volume.
If you have any questions about using this product,
we are here to help! Call or email us and an
experienced customer support representative will be
happy to assist you: 1-855-GO-TZUMI or
[e-mail].
life just got better.
tzumi
®
SoundBoost Item No. 8488. Distributed by tzumi Inc. NY, NY, 10016.
©Copyright 2022 tzumi Inc. All Rights Reserved. Made in China. All pictures shown
are for illustration purposes only. All other trademarks and trade names are the
property of their respective owners. Actual product may vary due to product
enhancement. Subject to change without prior notice.
6.3 x 3.7 x 9.1in
5.0
33ft. (10m)
5V/1A
5W
85dB
150Hz –20KHz
Rechargeable Li-ion battery
1200mAh
1 - 2 hours
Up to 4 hours
Dimensions
Bluetooth Version
Bluetooth Range
Power input
Speaker Output
Sensitivity
Frequency Range
Battery Type
Battery Capacity
Charge Time
Runtime
FCC Warning:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment. This device complies with part 15 of the FCC Rules
and industry Canada license-exempt RSS standard (s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE
LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE
FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL
INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE
RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO
GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR
INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE
TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY
TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO
TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE
FOLLOWING MEASURES:
• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT
FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN
FOR HELP
Warnings
• Do not listen to high volume sound for a prolonged
time to avoid hearing damage.
• Handle with care and avoid dropping.
• Do notplace heavy objects on the item.
• Keep away from children.
• Keep away from liquids. Do not operate the
SoundBoost if it has been exposed to liquids.
• Do not operate the SoundBoost with wet hands.