User's Manual

TRUE WIRELESS EARBUDS WITH CHARGING CASE

RT-18

USER MANUAL

WHAT’S INCLUDED

1×Charging box

2×Earbud(L&R)

1×Charging Cable

1×Instruction manual

BLUETOOTH PARING INSTRUCTION

1. Pick up two earbuds from charge casing to power on, you will hear “power

on” meanwhile two earbuds flash blue LED light, after seconds it will be

paired automatically at the same time will hear 2 chimes ”dong dong” from

two earbuds

2. Keep the distance between the device and earbuds within 10 meters. (For

Bluetooth paring only)

3. Turn on the Bluetooth function on your device, search and select the

Bluetooth code “Soundmates”.

4. You will hear “device connected” Indicating that Soundmates are now ready

to use.

Remark: two ways to reset earbuds.

If your Soundmates aren’t pairing to each other, you need to put them in the

charge casing then pick up them and it will auto pairing.

FUNCTIONS

Power on: Pick up two earbuds from charge casing

PAGE 1
TRUE WIRELESS EARBUDS WITH CHARGING CASE RT-18 USER MANUAL WHAT’S INCLUDED 1×Charging box 2×Earbud(L&R) 1×Charging Cable 1×Instruction manual BLUETOOTH PARING INSTRUCTION 1. Pick up two earbuds from charge casing to power on, you will hear “power on” meanwhile two earbuds flash blue LED light, after seconds it will be paired automatically at the same time will hear 2 chimes ”dong dong” from two earbuds 2. Keep the distance between the device and earbuds within 10 meters. (For Bluetooth paring only) 3.
PAGE 2
Power off: Put back two earbuds into charge casing. MUSIC/CALL 1. Previous/Next song When music is playing, tap left earbud for three times to go to the previous song, tap right earbud for three times to go to the next song. 2. Play/pause Tap right earbud twice to play/pause music. 3. Answer /End an incoming call Tap right/left earbud twice to answer a call, and tap right/left twice again when you want to end the call.
PAGE 3
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.