[in i WORKING MODE 1) Frequency Mode (VFO) Under this made, you can use [23] / [ &23] key to change the frequency or input the frequency by keypad directly and store channels. 2) Frequency-Channel Mode (MR) ‘When you have stored a memory channel at least and under VFO mode, press [G0] key to enter MR mode. The frequency will be indicated on the display and the channel No. will be indicated at the right side.
5) 6) MENU Mode Press [ @D ] key to enter MENU mode, there are 34 items in total. Please see SET MENU MODE. Page 21 Reset Mode Press [ (0) ] key and switch the power on to enter Reset mode, then press [ @ ] key to enter. 1. or [ £3] key to select OVERFULL. 2. VFO: Initialize all setting under frequency mode. 3. FULL. initialize all setting under frequency and memory mode.
SHORTCUT MENU OPERATION brightness = 00 +O setting item tom Enter Noreen No. Memes item Display 1) Frequency 1 Channel scan priority (7 QD +6 [run] Transmit grieve QD +E2 0 setting HTX power setting salience QD + ED [run] setting 5) Dual Walt/ +X preen display mode 8) Fightback @™ mo Select parameter Parameter Explanation Confirm Re tum Standby: item Item Enter No.
from item Enter Screen Select Parameter Confirm Return No. Name tem Display parameter Explanation salvos GF gp +2 prompt ow £0 20) Power-on (55 @) + display )Battery (5 GD +B voltage £2 22) Power-on (i (0) +, message repeater @ +e shift B om E2 Display ® as channel name 24) Channel zd name TO editing 25) TIRE +E tone T@ ow coder Item Item Enter No.
[in i DETAILED FUNCTION DESCRIPTIONS 1) Scan & Scan Mode setting 1&17) Functions: under VFO/MR/CH mode, TH-UVF9 allows you to scan the entire current operating band and memory channels. Enter Menu 1* and press [ GI ] key to start scanning. When you have started scanning, press [€=3 key to change direction. And it will halt on a signal it encounters, press PTT key to stop scanning; Press MINI key to stop scanning temporally; Press [ G2 1 key again fo exit the scanning function.
2) Priority Transmit (TX SELECTMEN 2) Functions: TH-UVF9 allows you to transmit on the sub band even if you are working on the operating band. Enter Menu 2™ to select priority transmit band. Default: EDIT. EDIT: It will transmit on the operating band. BUSY: It will transmit on the band last talking used 3) VOX Level & VOX Switch (VORTEX .SW--MENU 3&13) Functions: the VOX function provides automatic transmittance switching based on voice input to the microphone.
7) LED Display Mode 7) Function: select the LED/Keypad Lamp mods. Enter Menu 7* to select LED display mode. Default: AUTO. ON: LED display lights all the time. AUTO: illuminates the LED when any key Is pressed and after 3s the light Is off. OFF: Disable the LED lamp. 8) Back light Brightness setting 8) Functions: choose LED fightback brightness. Enter Menu 8 to select back light brightness. Default: COLOR. COLOR: brighter. COLOR: default setting. COLORS: darker.
14) Dual Watch/Monitor (D--MENU 15) Functions: Dual Watch features makes TH-UVULAS can monitor the calling signal when FM radio is on and you won't miss any calling. Enter Menu 15" to set DW. Default: OFF. 15) Receive Saver 16) Functions: this features significantly reduces quiescent battery drain, and you may not receive the full data burst. Enter Menu 16* to set RX. SAV. Default: OFF.
20) Display Channel Name (DIS NAME SCH NAME--MENU 23824) Functions: switch channel name display ON/OFF and edit channel name under MR/CH mode. Enter Menu 23" to switch display channel name ON/OFF. Enter Mon 24" to edit channel name, also you can edit it directly by program software. Using [ €X3]/ [3] to select character; [ EX2] switch cursor position.