Wireless Backup CameraSolar Powered with Extended Battery Life
TABLE OF CONTENTS 1. Introduction ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������1 2. Package Contents ���������������������������������������������������������������������������������������������������������������������������������������������������������������2 3.
1. INTRODUCTION Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact Type S at 866.294.
QUICK INSTALLATION GUIDE 1. Fully charge camera. Fold back camera power port plug and insert included charging cable. Most AC wall adapters will work with the USB charging cable. 2. Plug in monitor, power on camera, and test connection. (Camera and monitor come pre-paired) 3. Unscrew your license plate. 4. Align camera with license plate and secure to vehicle. See Manual for additional mounting guidance. or Windshield Dash Mount 5.
4. BEFORE YOU INSTALL Please charge and test the Camera / Monitor before you install on your vehicle. 1. Fully charge camera. Fold back camera power port plug and insert included charging cable. Most AC wall adapters will work with the USB charging cable. 2. Plug in monitor, power on camera, and test connection. (Camera and monitor come pre-paired) 5. INSTALLATION GUIDE DASH MONITOR INSTALLATION - DASH MOUNT 1. 2. 3. 1. Remove the backing tape on the Dash Mount and attach it to the dashboard.
DASH MONITOR INSTALLATION - WINDSHIELD MOUNT 1. 2. 3. 1. Place the Windshield Mount on the windshield and push the knob counter clockwise to lock in place. 2. Attach Dash Monitor to the Windshield Mount and adjust to your desired position. 3. Adjust the tube of the Windshield Mount so the base of the Dash Monitor is touching the surface of the dashboard in order to reduce vibration rattling. POWER UP THE DASH MONITOR 1.
SOLAR WIRELESS BACKUP CAMERA INSTALLATION A) STANDARD INSTALLATION: 2. Secure the Solar Wireless Backup Camera and license plate with screws back onto the rear of your vehicle. 1. Unscrew your license plate. Blue LED light 3. Push and hold the power button of the Solar Wireless Backup Camera for 1 second, the blue LED light will flash 2 times. 4. Power on the Monitor with the 12V/24V adapter.
B) LOWERING INSTALLATION – FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE (This allows more clearance for finger tips to release door latch) 1. Unscrew and remove your license plate. 2a. Unscrew and detach the original Mounting Tabs from the back of the Solar Wireless Backup Camera. 3. Install the license plate onto the Solar Wireless Backup Camera with the Mounting Screws & Nuts. 4. Secure the Solar Wireless Backup Camera with the license plate back onto the rear of your vehicle. 2b.
PAIRING The Solar Wireless Backup Camera is pre-paired with the Monitor, and it is set as rear camera as default. You should see the following screen that shows the rear view if the Dash Monitor is powered and the Solar Wireless Backup Camera is fully charged. If you can not see camera image showing on Dash Monitor, pair the Camera with the following steps: 1. 2. 3. 10 Press and hold the Power Button under the camera for 6 seconds, or until the LED flashes Blue continuously.
4. The camera should be paired within 30 seconds. If the pairing is successful, the display will show “Pair OK”. 5. If no camera is found, then the display will show “Pair Fail”. In this case, cut off power and reboot the Dash Monitor. If you keep receiving the “Pair Fail” message after several attempts, please call our technical support to assist in troubleshooting. ROTATE CAMERA Tap on the setting to reverse the camera view.
CONTRAST Swipe to adjust screen contrast OPERATION TIME Tap to choose different operation time. The Dash Monitor’s parking view operation time will start to count down when you wake up the Solar Wireless Backup Camera. When the timer runs out, the parking view will automatically switch to stand-by mode. MOTION DETECTION Tap to choose motion detection range. Motion detection range can help you adjust the detection distance between you and the Dash Monitor when you drive.
ADJUST CAMERA VIEW Swipe up and down to adjust view. NOTE: You cannot adjust the parking aid line and camera view in the split screen mode. BACKUP CAMERA POWER, MODES & LED INDICATORS Power / Mode Status LED Indicators Power On Press and hold Power button for 1 second, Camera will power on. Blue LED light flashes 2 times when Camera is powered on. Power Off Press and hold Power button for 2 seconds and release, Camera will power off. Red LED light flashes 1 time when the Camera is powered off.
7. SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions of 12V Car charger for Model BT533033. 2. Before using the product, read all instructions and cautionary markings. 3. Do not expose car charger to rain, moisture, or snow. 4. Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury to persons. 5.
• • • • • • • • • • • • • Never depend on the Solar Wireless Backup Camera entirely when backing up. The image on the screen is different from actual conditions. Objects viewed in the Dash Monitor differ from actual distance because a wide-angle lens is used. Objects in the Dash Monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.
• • • • • • • • • • The Solar Wireless Backup Camera has a water resistant construction. Do not detach, disassemble or modify it. This may cause incorrect operation. Solar Wireless Backup Camera is waterproof. Do not submerge Solar Wireless Backup Camera in water, which can cause internal damage to the Camera. If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally.
• • Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child. Teach children to move away from a vehicle whenever it is started. 8. MAINTENANCE & WARRANTY CLEANING • If dirt, rain or snow attaches to the Camera, the Monitor may not clearly display objects. If water droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth. • Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration.
2. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale. 3. The equipment must not have been altered or damaged through negligence, accident, improper operation, or failure to follow the product instructions for installation, use, or care. 4. The replacement of parts is excluded from the warranty when replacement is necessary due to normal wear and tear. 5.
DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Type S and/or its affiliates do not guarantee or promise that the user of Solar Wireless Backup Camera will not be in an accident or otherwise not collide with an object and/or person.
9. GENERAL INFORMATION CUSTOMER SERVICE/CONTACT IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/ EXCHANGE THE PRODUCT. FCC / IC Compliance Statement: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s).
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. L'appareil a été évalué pour répondre aux exigences générales d'exposition RF. le dispositif de a été évalués à répondre général rf exposition exigence. Contains Transmitter Module IC: 8102A-VCM713OVO1 Contains Transmitter Module FCC ID: 2AAIXVCM713OVO1 CAN ICES-3 (B)/NMB-3(B) Wireless Backup Camera Solar Powered With 6.
A Horizon Brands Company 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 1.866.294.9244 | info@typesauto.com ©2020 Type S. All rights reserved. www.typesauto.