080P Solar Powered App View Backup Camera
TABLE OF CONTENTS 1. Introduction ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������1 2. Package Contents ���������������������������������������������������������������������������������������������������������������������������������������������������������������2 3.
1. INTRODUCTION Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced technician if you are not comfortable installing the product. You can also contact TYPE S at 866.294.
3. PRODUCT SPECIFICATIONS Frequency: 2.4 GHz Operating Voltage: DC 5V Operating Temperature: 14ºF~122ºF (-10ºC~50ºC) Camera Water Resistance: IP67 Rating Battery Capacity: 2500mAh (Minimum Capacity 2400mAh) Maximum Signal Range: 33 Feet / 10 Meters (without interference or obstruction) Camera Lens Solar Panel 4.
5. CAMERA STATUS & LED INDICATORS Power / Mode Status LED Indicators Power On Press and hold the power button until you see the blue LED light flashes and then release. Blue LED light flashes twice. Power Off Press and hold the power button for more than 2 seconds and then release. Red LED light flashes once. Reset password While the Backup Camera is on, press and hold the power button for more than 5 seconds and then release. Blue LED light flashes 5 times.
5 5. Tap Pair Camera. 6. Tap the Connect icon to pair with the camera. 7. Follow the on-screen instructions and assign a new password for the camera. 8. Tap Join when the APP prompts you to join the Backup Camera’s WiFi network. 9. You should see the live view. NOTE: No matter you close or push the APP to the background, the APP will switch back to live view automatically everytime you open the APP again.
OPTION B - MOUNT ONTO EXISTING LICENSE PLATE WITH DOUBLE-SIDED TAPE OR 2. Secure with screws provided. OR 1. Attach the International Mounting Plate to the back of the Wireless Backup Camera. 3. Unscrew and remove the license plate from your vehicle. 4. Peel off the cover of the double-sided tape from the International Mounting Plate, and attach the license plate to the Wireless Backup Camera. RECOMMENDATION Thoroughly clean & dry the mounting surface area of the license plate before attaching.
5. Secure the license plate with the attached Wireless Backup Camera to the vehicle.
OPTION C - LOWERING INSTALLATION – FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE (This allows more clearance for finger tips to release door latch) 1. Unscrew and remove the license plate from your vehicle. 2. Place the Two Way Mounting Tabs behind the license plate. Insert the Mounting nuts through the Wireless Backup Camera mount holes and tighten with a wrench. Reference the Assembly Reference Example. 3. Secure the Two Way Mounting Tabs to the vehicle using the vehicle’s license plate screws.
10. SETTINGS AND OPERATION ROTATE CAMERA Tap on the setting to reverse the camera view. BRIGHTNESS Swipe to adjust screen brightness. CHROMA Swipe to adjust screen chroma. CONTRAST Swipe to adjust screen contrast. SATURATION Swipe to adjust screen saturation. OPERATION TIME Tap to choose a different operation time. The Wireless Backup Camera’s parking view operation time will start to count down when you wake up the Wireless Backup Camera.
FIRMWARE VERSION Tap to check the Backup Camera’s firmware version. UPGRADE Tap to upgrade the Backup Camera’s firmware to the latest version through the APP: NOTE: - Keep your smart device connected to WiFi in order to download the firmware. - Make sure the APP is paired and connected to the camera prior the upgrade. 1. Tap Start update to begin. 2. After the upgrade is done, the APP will switch back to the live view. 1 2 RESET DEFAULT Tap to clear all the camera settings.
11. SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions of Model BT57799. 2. Before using the product, read all instructions and cautionary markings. 3. Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury to persons. 4. Do not disassemble the Wireless Backup Camera; take it to a qualified serviceperson when service or repair is required.
• • • • • • • • • • • • • • • may change. When washing the vehicle with high pressure water, be sure not to spray it around the Wireless Backup Camera. Otherwise, water may enter the Camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. Do not strike the Wireless Backup Camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.
• • Will work up to 33 feet. ALWAYS engage Parking/Emergency/Hand Brakes of the vehicle when testing the system. SAFETY AROUND AND BEHIND OTHER VEHICLES Using a Wireless Backup Camera is not enough to completely overcome a vehicle’s blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do not see children, pets, or others near their vehicles.
12. MAINTENANCE & WARRANTY CLEANING • If dirt, rain or snow attaches to the Camera, the APP screen may not clearly display objects. If water droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth. • Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To clean the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth.
5. Repair or replacement parts supplied by TYPE S under this warranty are protected only for the unexpired portion of the original warranty. 6. This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle. OWNER’S RESPONSIBILITIES: TYPE S will make every effort to provide warranty service within a reasonable period of time.
the consistent adherence to all applicable traffic laws and motor vehicle safety regulations. The Wireless Backup Camera is not intended to be a substitute for rearview mirrors or for any other motor vehicle equipment mandated by law. Even when properly installed, our Wireless Backup Camera has a limited field of vision and does not provide a comprehensive view of the rear area of the vehicle.
13. GENERAL INFORMATION CUSTOMER SERVICE/CONTACT IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN/ EXCHANGE THE PRODUCT. FCC Compliance Statement: This device complies with Part 15 of the FCC rules.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. IC Compliance Statement: This device complies with Industry Canada licence-exempt RSS standard(s).
1080P Solar Powered App View Backup Camera BT57799 Responsible Party: TYPE S 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 Tel: 866-294-9244 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 1.866.294.9244 | info@typesauto.com ©2020 TYPE S. All rights reserved. www.typesauto.