Specification
TYPICAL CHARACTERISTICS
Characteristic Test Method Value
Adhesive Butyl Rubber Copolymer
Thickness 20 mils
UV Stability 180 Days
Application Temperature 30°F (-1°F) to 180°F (82°C)
90° Peel Adhesion (lb/in)
Plywood 7.2
OSB 2.8
Facer 6.9
Low Temperature Flexibility (per ASTM D-3330) PASS
Nail Sealability (per ASTM D-1970) PASS
Tensile Strength (per ASTM D-5034) 55 lbs/in
FOR COMMERCIAL AND RESIDENTIAL APPLICATIONS
Made in the USA of US and global components. © 2017, Berry Global Inc.
TYPAR
®
is a registered trademark of Berry Global Inc. or its affiliate.
Please visit TYPAR.com for installation instructions and warranty information.
Building Wraps | Flashings | Construction Tape | Fasteners
e information contained herein is to the best of our knowledge accurate and reliable and is provided for the user’s assessment and
verification. However, since the circumstances and conditions under which such information and the products discussed can be used
may vary and are beyond our control, we make no warranties, express or implied, other than those warranties described in the
TYPAR
®
weather protection system limited warranty located online at www.typar.com/downloads, subject to the limitations and
exclusions described therein.
TYPAR
®
BUTYL FLASHING
4" x 75' 6" x 75'
Rolls/Case: 12 Cases/Pallet: 27 Rolls/Case: 8 Cases/Pallet: 27
9" x 75' 12" x 75'
Rolls/Case: 4 Cases/Pallet: 27 Rolls/Case: 4 Cases/Pallet: 27
ROLL SIZES: