Installation Instructions

ManualsBrandsTyco Safety Products/Sensormatic ManualsElectronicsDigital Microwave System anti-theft equipment

WORLD LEADER IN ELECTRONIC SECURITY

Setup and Service Guide

8000-0395-02, Rev. A (9 pages)

MICROWAVE PRODUCTS 1

1 Digital Microwave

System 915

Addendum

EADC12WC DMS Concealed 12'

EADC18WC DMS Concealed 18'

EADC24WC DMS Concealed 24'

EADM06 DMS Micromax 6'

EADM06WCDMS Micromax WC 6'

EADM12 DMS Micromax 12'

EADM12WCDMS Micromax WC 12'

EADM18 DMS Micromax 18'

EADM18WCDMS Micromax WC 18'

EADM24 DMS Micromax 24'

EADP06 DMS Pedestal 6'

EADP18WC DMS Pedestal WC 18'

EADR03WC DMS Sensormat II 3'

EADR06WC DMS Sensormat II 6'

EADR10WC DMS Sensormat II 10'

EADS03 DMS Slimline 3'

EADS06 DMS Slimline 6'

Contents

About this Guide................................................ 1

About the DMS 915........................................... 2

Specifications.................................................... 9

Declarations...................................................... 9

About this Guide

This Setup and Service guide explains typical

installations and tuning for the DMS 915 detector.

It is intended to be used as a supplement to the

DMS 915 Installation and Field Service Manual.

Refer to the DMS 915 manual for a complete

description of theory, installation, and

troubleshooting. Other related documents are:

•

DMS 915 Installation and Field Service Manual,

8000-0395-01

Note:

Because customer requirements dictate the

placement of detector components, your

Sensormatic representative will supply this

information separately.

If you need assistance...

Call Sensormatic Customer Support at:

1-800-543-9740

Micromax,

Sensormatic

, and the

Sensormatic logo

are

registered trademarks of Sensormatic Electronics Corporation.

Other product names (if any) mentioned herein may be

trademarks or registered trademarks of other companies.

No part of this guide may be reproduced in any form without

written permission from Sensormatic Electronics Corporation.

(DOJ) 11/00

Preliminary – 11/03/00

Summary of content (9 pages)

PAGE 1
WORLD LEADER IN ELECTRONIC SECURI TY Digital Microwave System 915 Addendum 1 EADC12WC DMS Concealed 12' EADC18WC DMS Concealed 18' EADC24WC DMS Concealed 24' EADM06 DMS Micromax 6' EADM06WC DMS Micromax WC 6' EADM12 DMS Micromax 12' EADM12WC DMS Micromax WC 12' EADM18 DMS Micromax 18' EADM18WC DMS Micromax WC 18' EADM24 DMS Micromax 24' EADP06 DMS Pedestal 6' EADP18WC DMS Pedestal WC 18' EADR03WC DMS Sensormat II 3' Setup and Service Guide About this Guide This Setup and Service guide explains
PAGE 2
About the DMS 915 The Digital MicroWave System (DMS) 915 is a microcontroller-based anti-theft system. The DMS 915 produces an alarm when it detects a Sensormatic tag, a packaged semiconductor diode. mounted in pedestal enclosures located at the store exit. The remote alarm provides a audio/visual signal that a tag has entered the “zone of protection.” The power pack powers and controls the system. The pack is typically concealed inside an enclosure.
PAGE 3
Typical Installations Concealed Ceramic RF Antennas with wire cloth DMS 915 components are arranged in various configurations depending on the application. The Concealed ceramic RF antennas with wire cloth system consists of two helix type RF antennas, each resting on the ceiling tiles. The RF antennas are faced towards each other at a typical distance range from 3 to 24 feet depending upon the installation.
PAGE 4
Pedestal with Plates Pedestal with Wire Cloth The Pedestal with plate system consists of two plastic helix type RF antennas, each mounted and enclosed in pedestals. A transmitter/ receiver power pack, RF antenna, and an electrostatic field radiator plate are contained in one unit while the other pedestal has only an RF antenna and an electrostatic field radiator plate. The housings are faced toward each other at a typical distance range from 3 to 24 feet depending upon the installation.
PAGE 5
Pedestal with Vortex The Pedestal with vortex system consists of two plastic helix type RF antennas, each mounted and enclosed in pedestals. A transmitter/ receiver power pack and RF antenna are contained in one unit while the other pedestal has only an RF antenna. The housings are faced toward each other at a typical distance range from 3 to 24 feet depending upon the installation.
PAGE 6
Micromax Plastic RF Antenna with Wire Cloth The Micromax with wire cloth system consists of two plastic helix type RF antennas, each mounted and enclosed in plastic housing pods suspended from the ceiling or mounted to the floor. The housings are faced toward each other at a typical distance range from 3 to 24 feet depending upon the installation. In between the housings lays an electrostatic radiator, a wire cloth antenna whose length is less than the separation between the pods.
PAGE 7
Specifications IF FM Detector Center Frequency: ............111.5kHz IF Bandwidth (module): .....±4.38kHz maximum Electrical AC Step-down Transformer Primary Input: ...................100, 120, or 230Vac, 50/60Hz Fused Secondary Output: ..24Vac, 50VA, 2.08A Fuse: ................................2.5A LKB STD fastblow DC Power Supply Resettable Polyswitch:.......3.0A at 20°C (derates to 2.1A at 50°C) Positive Regular Outputs: ..+15.8, +12, +8, +5Vdc Negative Regular Outputs:.
PAGE 8
Relative Humidity: .............0 to 90% noncondensing Vortex Bar Length..............................varies Mechanical Width................................2" Depth ...............................0.5" Power Pack Length..............................24") Width................................9.25") Depth ...............................1.75" Weight..............................4.6kg (10.2 lbs) Weight..............................xkg (x lbs) Metal Mounting Frame Length..............................
PAGE 9
Depth ...............................7.24" Weight..............................xkg (x lbs) Declarations Regulatory Compliance EMC:.............................. 47 CFR, Part 15 Safety: ........................... UL1950 (UL) Can/CSA C22.2 No. 950 EN60950 (CE) FCC COMPLIANCE: This equipment complies with Part 15 of the FCC rules for intentional radiators and Class A digital devices when installed and used in accordance with the instruction manual.