User's Manual

REMAPPABLE XBOX SERIES X|S CONTROLLER 1.Instructions:
User Manual
Make sure you read this guide before using the wireless controller
5.Pack Contents:
1 x Wireless Controller
1 x User Manual
2 x Trim Cover
1 x Data Charging Cable
3.Operation Guide Of Remappable Buttons:
2.Specification:
4.The operation guide to replace the trim cover:
External Dimensions:155*103.5*64.5 mm
Charging Voltage: DC5V/500mA
Net Weight: 245g
6.CAUTION:
The product is not water proof. Please keep it away from water, high
humidity and high temperature environment.
DO NOT attempt to modify or disassemble this product.
DO NOT slam or hit this product hard, there may be some unnecessary
damage for it.
Due to violation of above operations,warranty is invalid.
Joystick
Joystick
A / B / X / Y
Program
Indicator LED
D-pad
3.5 mm Headset Jack
Share
XboxView
Menu
B
A
X
B
A
X
Reset
M 1/2/3/4
M 1/2/3/4
Xbox Wireless
Type-C
L-Trigger
R-Trigger
RB
LB
Noted! The other three M buttons are set up the same as the above
steps. And they are each independent and do not interfere with each other.
Please Noted! Pry the trim cover from the game controller with your
fingers.Do not use other tools to avoid injury to you and damage to the
product.
1. Press and hold Program , then press one of M button you want to program, the
indicator will be highlighted to enter setting mode.
*.Please noted! A single M can map up to 16 steps.
*.All the below buttons can be
mapped:
3. Clear the content mapped in the M button:
* Press and hold Program , and press the M button later, the indicator will be highlighted.
Then press the M button once again and the indicator will dim accordingly，the
clearance was completed.
* If you re-map the M button , will record the new content automatically.
)))
B
A
X
1.Turn on the power button located on the console.
2.Turn on your Xbox Series X|S by pressing the Xbox Button on your controller.
4.It has paired memories , just press the Xbox button to reconnect after the first
successful connection.
Extended Function! Compatible with Windows 7/8/10 via USB or the Xbox Wireless
Adapter sold separately.
3.Press the ")))" buttons on both the controller and console,the indicator will fast
flash to enter the pairing mode. After connection,the indicator will always be on.
B
A
X
2
1
B
A
X
2
1
1
2
2. Take setting A B continuous action mapping in M1 as an example
First step: press the A , then press the Program once and the indicator also
flashes once accordingly.
Second step: press the B , and the press the Program again in the same way.
Last step: press the M1 once again and the indicator will dim accordingly. It indicates
that the A and B ’s action has been completely mapped to this M1 .
Prise
B
A
X