Instruction Manual

ManualsBrandsTWINSEL ManualsElectronicsPanel light

Made in China

Residential use only

Indoor use only

Fabriqué en Chine

Usage résidentiel seulement

Usage intérieur seulement

Hecho en China

Uso residencial solamente

Uso interior solamente

Rev. 11-23-2020

ITM. / ART. : 1500325

Model / Modèle / Modelo: FLP14-SRC-C-T

Ultra-Thin LED Panel - Sunray

INSTRUCTION MANUAL

IMPORTANT, KEEP FOR FUTURE REFERENCE:

PLEASE READ CAREFULLY.

Panneau à DEL ultra mince - Sunray

MANUEL D’INSTRUCTIONS

IMPORTANT, À CONSERVER POUR FUTURE

RÉFÉRENCE: LIRE ATTENTIVEMENT.

Panel LED ultra delgado - Sunray

MANUAL DE INSTRUCCIONES

IMPORTANTE, CONSERVAR PARA FUTURA

REFERENCIA : LEER DETENIDAMENTE.

Summary of content (12 pages)

PAGE 1
ITM. / ART. : 1500325 Model / Modèle / Modelo: FLP14-SRC-C-T Ultra-Thin LED Panel - SunrayTM INSTRUCTION MANUAL IMPORTANT, KEEP FOR FUTURE REFERENCE: PLEASE READ CAREFULLY. Panneau à DEL ultra mince - SunrayMC MANUEL D’INSTRUCTIONS IMPORTANT, À CONSERVER POUR FUTURE RÉFÉRENCE: LIRE ATTENTIVEMENT. Panel LED ultra delgado - SunrayMR MANUAL DE INSTRUCCIONES IMPORTANTE, CONSERVAR PARA FUTURA REFERENCIA : LEER DETENIDAMENTE. Rev.
PAGE 2
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN FR INCLUDED Item Pièce Pieza WHAT YOU WILL NEED...
PAGE 3
EN CAUTION If using a dimmer, it must be LED compatible. FR ATTENTION Si un gradateur est utilisé, celui-ci doit être compatible avec les lumières à DEL. ES ATENCIÓN Si utiliza un regulador, debe asegurarse de que sea compatible con las luces LED. IMPORTANT IMPORTANT IMPORTANTE The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used.
PAGE 4
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN FR WARNING: Risk of electrical shock. Turn off power at the breaker panel. Risque de décharge électrique. Éteindre le disjoncteur sur le panneau électrique. AVERTISSEMENT : ES ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la corriente eléctrica del panel (disyuntor).
PAGE 5
EN FR 3. Place marks on the ceiling where the support screw holes are located (fig. 1b). Unscrew the junction box screws and remove the mounting plate. ES 3. Marquer au plafond l’emplacement des trous pour vis de fixation (fig. 1b). Dévisser les vis de la boîte de jonction et retirer la plaque de montage. 3. Marque el techo con los puntos donde quiera instalar los tornillos de soporte (fig. 1b). Desatornille los tornillos de la caja de conexiones y retire la placa de montaje. fig.
PAGE 6
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN 5. Position the mounting plate so that the arrow label is pointing to the left. Install the mounting plate to the junction box using the 2 junction box screws. Screw the retaining screws into the wall anchors (fig. 1d). fig. 1d Mounting plate Plaque de montage Placa de montaje Junction box screw Vis de boîte de jonction Tornillo de caja de conexiones Retaining screw Vis de fixation Tornillo de fijación 6 FR 5.
PAGE 7
EN FR 6.Place the LED panel under the mounting plate making sure that the arrow label is also pointing to the left. 7. Suspend the LED panel from the ceiling using the wired hooks by fixing them to the notches on the mounting plate (fig. 2). 8. Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector.
PAGE 8
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN FR 9. Locate the slots on the LED panel and the metal anchors on the mounting plate. Lift the LED panel and insert the back anchors into the corresponding slots (fig. 3a). 10. Lift the front of the LED panel. The metal anchors on the mounting plate should now automatically align with the slots on the LED panel (fig 3b). fig. 3a 9. Localiser les fentes sur le panneau à DEL et les ancrages métalliques sur la plaque de montage.
PAGE 9
EN 11. Push the LED panel toward the ceiling (fig. 3c) and then slide it to the left to secure it in place using the metal anchors (fig. 3d). 12. Release the panel (fig. 3e) and restore electrical power. fig. 3c FR ES 11. Pousser le panneau à DEL vers le plafond (fig. 3c) et le glisser vers la gauche pour le sécuriser en place à l’aide des ancrages en métal (fig. 3d). 11. Empuje el panel de LED hacia el techo (fig.
PAGE 10
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN FR ES ADJUSTING THE COLOUR TEMPERATURE AJUSTER LA TEMPÉRATURE DE COULEUR AJUSTE DE LA TEMPERATURA DE COLOR Choose the colour temperature that you like best and then remove the protective film (fig. 4). Choisir la température de couleur qui vous convient et enlever la pellicule protectrice (fig. 4) Elija la temperatura deseada y retire la película protectora (fig. 4) 3,000K 4,000K 5,000K fig.
PAGE 11
USA (FCC) EN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device does not cause harmful interference; and 2. this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 12
INSTRUCTION MANUAL / MANUEL D’INSTRUCTIONS / MANUAL DE INSTRUCCIONES EN FR ES WARRANTY GARANTIE GARANTÍA Artika For Living Inc. is proud to offer you a three-year (3) limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is extended to the original owner in USA, Canada, Mexico, UK, Iceland, France and Spain and is non-transferable. It does not apply to retailers, commercial applications or establishments.