Bluetooth Audio Transmitter & Receiver User’s Manual Product Series : Pilot-Blue TX/RX System Model No. : BTT001 & BTT102 Version : 1.
Table of Contents Getting start 2 Device elements 3 Pairing to link 4 Troubleshooting 5 Specifications 6 1
Getting start • Free your music via Bluetooth The Bluetooth Audio Transmitter & Receiver is designed to deliver stereo music with the Bluetooth Version 1.2 and A2DP (Advanced Audio Distribution Profile) technology. It’s only a simple transmitter and receiver structure to unchain music in various audio players. Just plugging the Bluetooth transmitter to the earphone jack of any audio player, you will start to enjoy music from the receiver in distance or even in another room. • Package includes 1.
Device elements 1. BTT001, Bluetooth audio transmitter Top view Pairing button LED1(blue) Power on/off switch LED2(orange) Battery charging & LED3(green) Front view Side view 2.
Pairing to link 1. Setup Bluetooth link between transmitter and receiver • Power on both transmitter and receiver • The blue LED blinks at low speed (1Hz). • • • For the first time use, stay pushing the pairing button of transmitter and wait the LED1 of transmitter to blink at medium speed(2Hz). Then, devices are entered pairing status and setup link automatically. As the link is established, the LED1 on both devices are blinking at full speed(4Hz).
Troubleshooting Q1 : The music does not come out while turn on transmitter/receiver? Ans : a. Check the connection of audio plug and audio player. b. Check the battery status of both transmitter and speaker. c. Refer to “Pairing to link”, redo the proper setup procedure. Q2 : Is it possible to operate several receivers with single transmitter? Ans : No, it cannot. The bandwidth limit of the current Bluetooth technology is not allowed this kind of broadcasting method now.
Specifications 1. BTT001, Bluetooth audio transmitter BTT001 General Factors RF BT V1.2 Class II, 2.4GHz Max. RF Distance 15 Meters @Open Space BT Profile A2DP(Advanced Audio Distribution Profile) Data Rate 1 Mbps 1. Rechargeable Li+ Polymer Battery 2. Battery Life : 3 hours Std. 3.
Specifications 2. BTT102, Bluetooth audio receiver BTT102 General Factors RF BT V1.2 Class II, 2.4GHz Max. RF Distance 15 Meters @Open Space BT Profile A2DP(Advanced Audio Distribution Profile) Data Rate 1 Mbps 1. Rechargeable Li+ Polymer Battery 2. Battery Life : 3 hours 1. Headphone Out : Max. 10mW @ 32Ω per channel 2. Freq. Response : 20Hz to 20 KHz@ -3dB 3.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.