User’s Manual 1
Table of Contents CHAPTER 1 GETTING STARTED 1 Getting Started ................................................................................... 2 Inventory ............................................................................................. 3 Safety and Maintenance .................................................................... 4 Checklists ........................................................................................... 5 Features ..................................................
APPENDIX A STATEMENTS 29 Statements ........................................................................................ 30 European Notice ............................................................................... 31 Safety CAUTION ............................................................................... 32 Battery Disposal ............................................................................... 33 CAUTION FOR ADAPTER ................................................................
Chapter 1 Introduction 1
Getting Started Congratulations on your purchase of this Tablet PC. This Tablet PC is a fully functional PC with built-in wireless Connectivity. With your Tablet PC, you will be able to organize and access important business and personal information. In addition, you will be able to send and receive e-mail and access the Internet. This Manual contains all the information you need to set up and use your Tablet PC. It describes all the features of the Tablet PC in an easy-to-read yet thorough manner.
Inventory This Tablet PC is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your Tablet PC during the warranty period. Update this section when you add new options.
Safety and Maintenance You can use your Tablet PC under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your Tablet PC: • Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer. The shipping carton should contain the following: STANDARD • A Tablet PC with a hard disk drive • Two standard battery packs • An AC adapter with power cord OPTIONS The following items are normally optional, but some vendors may include them in the standard package.
Features High performance Processors Intel® Atom™ Processor Z530P (512K Cache, 1.60 GHz, 533 MHz FSB) High Capacity Hard Disk Drive The Tablet PC has a high capacity hard disk drive to store your favorite programs and large multimedia files. Built-in Wireless LAN and LAN Capability A built-in 802.11a/b/g/n and 10/100 Mbps Ethernet port allow you to access the Internet or a local area network (LAN).
Quick Start Turning on the Tablet PC for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the left side of your Tablet PC. 3. Connect the AC adapter power cord to an AC outlet. 4. Press the power button to turn on the power. Note: The battery is not fully charged. Allow your battery to fully charge before using it (i.e., before disconnecting AC power).
Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your Tablet PC will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load. The Windows setup will prompt you for the product key number, shown to the right: P ro d u c t k e y n u m b e r Note: The product key is on a sticker attached to the bottom of the Tablet PC. 1.
Turning off Your Tablet PC Turning off the Tablet PC Tablet PC properly is important to maintaining your Tablet PC. 1. On the Start menu, click Turn off Computer. 2. Click Turn Off in below Windows screen. If you are going to be away from the Tablet PC for a short period, there are ways of conserving power without shutting down the system. Warning: Shutting off the Tablet PC improperly may result in data loss.
10
Chapter 2 Getting Started 11
Hardware and Software This chapter introduces the different components and controls of your Tablet PC, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your Tablet PC, read this chapter to familiarize yourself with the main components installed in the system.
Front View 1. 6. Security button Microphone 7. Application buttons 2. Light sensor 3. LED indicators 4. Speaker 5.
Right View 1. Microphone jack 2. Headphone jack 3. USB port 4. RJ-45 jack 5. USB port 6.
Top View 1. SD card slot 2. PCMCIA slot 1 2 Left View 1. Security lock slot 2.
Bottom View 1. Camera 2. Battery1 3. Battery2 4. Battery1 latch 5.
LED Indicators Icon Light Description No light WLAN is Not powered and Bluetooth is Not powered Blue WLAN or Bluetooth is enabled Green Tablet PC is reading from, or writing to the built-in hard disk.
Quick Start Button 1: Click on “QSB” icon found at status bar. 2: Click on “Open” to select any application you would like to launch by individual function key. [Hot Key 1] Volume up, Brightness up, WLAN, [Hot Key 2] Volume up, Brightness down, Bluetooth, Scan Barcodes, 3: Select execute file and press [open].
Note: Up to 2 “Quick Launch” function keys can be assigned to specific application depends on BIOS configuration. Touch pen The button located directly on the touch pen is the same in function as the right button on the mouse. Clicking button makes selections to perform a variety of other functions depending on the software. To select an object, first move the pointer over the object you want.
Chapter 3 Making Connections 20
Making Connections Your Tablet PC is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices. Right Side and Bottom Side Connectors 1. Microphone-in Jack Connect a microphone this jack to record audio. 2. Headphone Jack Connect a stereo headset or external speakers to this jack to listen to multimedia.
3. & 5. USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. 4. LAN RJ-45 Jack With the built-in Ethernet LAN, you can make LAN connection without installing PC cards. Connection speed is 10/100 Mbps. 6. Multi IO connector The Connector is reserved for specific purpose which is used to connect to customer’s device. Left Side Connectors 1.
3. Top Side Connectors 1. PC Card Slot (PCMCIA) Insert a PC Card (PCMCIA) card in the PC Card Slot as shown above until it snaps into place. Press the eject button to release the card. 2. SD Card slot The SD Card slot cab be used as an interface between you Tablet PC and a variety of devices. Insert an SD card in the SD card slot as shown above until it snaps into place. .
Chapter 4 Power Management And Using Software 24
Power Management Checking the Battery Level You can check the remaining battery power in the Windows® battery status indicator located at the lower right-hand corner of the task tray. The Battery Status icon only appears in the task tray while the unit is running on the battery power but not while the unit is running off an external power source through the AC adaptor. Enter Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1.
Warning: When battery power is low, the battery indicator will flash red, and the alarm will display a warning on your screen. Take immediate action, such as saving files or connecting to the AC adapter, or data may be lost. Battery Charging When you use the AC adapter to connect your Tablet PC to a power outlet, the internal battery will automatically begin to recharge. While the battery is charging, the Battery Charge icon on the Indicator panel will be active after 6~12 seconds.
Changing the Battery Pack 1. Slide the battery release latch, 2. Then remove the battery, 3. Align the back side of the battery pack with the battery bay and press the top side of battery pack to install it, 4. Move the latch to lock back into position. Heat Considerations The Tablet PC processor has been specially designed to consume little power, and generates very little heat. However, working in a hot environment, or working for long periods may raise the temperature.
Using Software Digitizer Calibration The touch screen is a thin membrane on the top of the LCD that rethhsponds to mechanical pressure on the screen’s surface. The cursor on the screen is controlled by the stylus. If you notice the stylus tip touch-point not matching up with the cursor, you can recalibrate the touch screen. Calibrating the Digitizer 1. Click the Windows® Start button > Control Panel > Switch to Classic View > Pen Tablet Properties > Calibrate. 2.
Calibrating the Touch Screen 1. Click the Windows® Start button > Control Panel > Switch to Classic View > Touch Settings. 2. Under the calibration tab, click on the [Calibrate…] button to activate the calibration screen. 3. Hold the pen and position your head as you normally do when working with the tablet. 4. Use the pen tip to click on the center of the crosshairs. The wheel moves to another location on-screen. 5.
Appendix A Statements 29
Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination.
Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/105/EC), Lowvoltage Directive (2006/95/EC) , the procedures given in European Council Directive 1999/5/EC . The equipment was passed. The test was performed according to the following European standards: • EN 300 328 V.1.4.1 (2003-04) • EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09) • EN 301 893 V.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Battery Disposal THIS PRODUCT CONTAINS LITHIUM-ION BATTERY PACKS. IT MUST BE DISPOSED OF PROPERLY.
government regulations arising from failing to comply with these guidelines. IMPORTANT NOTE (CO-LOCATION) FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25GHz frequency range.
interference, including interference that may cause undesired operation of the device.” W/detachable antenna “To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.