Table of Contents COPYRIGHT................................................................................................ 4 REGULATORY STATEMENT................................................................................ 4 Federal Communications Commission Statement .......................................................................................................... 4 Caution ..........................................................................................................................
USING THE BIOS SETUP UTILITY.......................................... 21 BIOS SETUP MENU .................................................................................... 21 STARTING THE BIOS SETUP UTILITY ................................................................ 21 NAVIGATING AND ENTERING INFORMATION IN BIOS.............................................. 22 OPTIONAL DEVICES .............................................................. 23 MAGNETIC STRIPE READER (MSR).............................
Preface Copyright Copyright© 2012. All rights reserved. No part of this user manual may be transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of the manufacturer. Information is subject to change without prior notice.
Preface RF exposure warning This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: 1.119W/kg Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Preface Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
Preface CAUTION FOR ADAPTER THIS TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER. BATTERY SAFETY DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. CAUTION FOR RJ-45 The RJ-45 jack is not used for telephone line connection. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Before You Start Before You Start Congratulations on your purchase of this tablet PC. This rugged tablet PC is portable and provides users with maximum mobile computing experience in a wide range of working environments. Before you begin using your tablet PC, read this chapter to familiarize yourself with the main components installed in the system. Package Contents If any of following item is damaged, please contact your retailer.
Before You Start Components Front View No. Item Description 1 Light Sensor Sense the ambient light condition for auto backlight setting function. 2 Webcam Use for video conference. 3 Microphone Receive audio input. 4 Speaker Emit sound. 5 Status Indicators (Power, Battery, Wireless) Indicate the corresponding function status. See “Status Indicators” on page 14. 6 Quick Menu button 7 Lock button Press to launch the Quick Menu.
Before You Start No. Item Description 8 Function button (P2) Press to launch an application assigned to the button. See “錯誤! 找不到參照來源。 on page 錯誤! 尚未定義書籤。” to program the function button. 9 Function (P1) / Rotate button By default, press this button to rotate the display 90° clockwise. Or, press this button to launch an assigned application. See “錯 誤! 找不到參照來源。 on page 錯誤! 尚未定義 書籤。” to program the function button. Power button Press to power on and off the tablet PC.
Before You Start Back View No. Item Description 1 Camera LED flash Provide additional lighting when taking pictures under low light environment. 2 Camera Use to take pictures. 3 Battery pack Supply battery power to your tablet PC. 4 Battery latch Slide down the latch to release the battery pack from the compartment. 5 Battery lock Lock the battery latch. 6 Docking connector Connect the tablet PC to a docking station.
Before You Start Right View Left View With battery pack Without battery pack No. Item Description 1 DC-in jack Connect the power adapter. 2 SIM card slot Use to insert a SIM card for WWAN, Gobi 3000, or LTE module connection.
Before You Start Top View No. Item Description 1 Barcode scanner Use to scan for barcodes. 2 Smart card reader Use to insert smart cards. Bottom View No. Item Description 1 SD card slot Use to insert an SD card for external storage. 2 USB port Connect USB peripheral devices. 3 LAN (RJ-45) port Connect to a local area network (LAN) using an Ethernet cable. 4 Serial port (RS-232) Connect a peripheral device, such as a printer or other device with serial port.
Before You Start Status Indicators The status indicators in the lower right corner of the tablet PC light up when a particular function of the tablet PC is active. Each indicator is marked with a symbol. Icon 14 Item Description Power Indicate the power status: Off: Power is off or the tablet PC is in hibernate mode. Green: Power is on. Blinking Green: The tablet PC is in standby or sleep mode.
Getting Started Getting Started This chapter will guide you on how to use your tablet PC. Powering Up Your Tablet PC Your tablet PC can be powered up using the AC adapter or the Lithium-ion battery. Using Battery Power 1. Install a charged battery in the battery compartment. 2. Remove the AC adapter (if plugged). Your tablet PC will automatically use the battery power.
Getting Started 3. Slide the battery lock to the position. lock 4. Repeat steps 1 to 3 to insert the second battery. Charging the Battery The Lithium-ion battery is not fully-charged upon purchase. To charge the battery, follow the steps below: 1. Install the battery to your tablet PC. 2. Connect the AC adapter to the DC-in jack of your tablet PC. 3. Connect the AC adapter to the power cord. 4. Plug the power cord to an electrical outlet.
Getting Started Checking the Battery Level It is important that you monitor the battery status regularly to ensure you do not run out of power at a critical moment. To check the remaining battery power, double tap the battery icon in the system tray.
Getting Started When to replace the Battery Pack The battery performance gradually decreases over time and usage. We recommend you to replace your battery pack after 18 to 24 months of usage. Removing the Batteries To remove the batteries, follow the steps below: 1. Slide the battery lock to the unlock position. 2. Press and hold down the battery latch and slide the battery to remove it from the compartment. 3. Repeat steps 1 and 2 to remove another battery.
Getting Started Starting Your Tablet PC Turning On Your Tablet PC Press the button until the Power LED lights up. Changing the Display Orientation You can rotate the display orientation to suit your preference. button to rotate the display 90°, 180°, and 270° clockwise. Press the NOTE You need to disable the Auto Rotate option in the Quick menu before pressing the shortcut button ( ) to rotate the display. Repeatedly press to rotate the display 180° and 270° clockwise.
Specifications 3. Tap Calibrate. 4. Follow the on-screen instructions to complete screen calibration. NOTE: If the optional digitizer is enabled, use a pencil to do the touch panel calibration instead of using the digitizer pen.
Specifications Using the BIOS Setup Utility Your tablet PC has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the tablet PC. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS Setup Utility allows you to configure your tablet PC basic settings. When you turn your tablet PC on, the system reads this information to initialize the hardware so that it can operate correctly.
Specifications Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: External Keyboard Enter +/F1 F2 F3 F4 Esc Description Selects screen. Moves up/down to select items. Confirms the selection and enters the selected menu screen. Changes an option for the selected items. Displays the Help screen. Invokes the previous values. Loads optimized default values. Saves the changes and exits Setup. Exits any section.
Specifications Optional Devices The functionality of your Tablet PC can be expanded with the use of devices, such as the Magnetic Stripe Reader (MSR), Pin Pad, and others. These devices are optional items and may be purchased separately. Magnetic Stripe Reader (MSR) The integrated Magnetic Stripe Reader (MSR) can be installed on your Tablet PC as shown below.
Specifications Pin Pad The Pin pad is designed with a ready-to-use interface. Install the Pin pad on the back of your Tablet PC as shown below.
Specifications Specifications Features Processor Specifications Type & Speed Chipset System Memory Display Intel Atom N2600 1.6GHz 512KB x2 L2 cache NM10 Type DDRIII 800 One 204-pin DDRIII SODIMM sockets for 2GB Maximum Memory 2GB Display Standard: 10.1” WXGA (1280x800) TFT LCD with resistive multi-touch panel Optional Sunlight readable: 10.
Specifications Features Specifications Bottom Side I/O: RS-232x1, RJ 45x1, USB 2.0x2, DC-inx1 Rear Side I/O: Docking connector x1 HD Audio One speaker Analog Mic. Array (With 2 Microphones) Input:100V-240V, 50Hz-60Hz, Output:19V, 3.42A; 65W Compliant with Energy Star 5.2 Two Li-Ion battery packs (11.1V, 2600mAh, 28.