User Manual

ManualsBrandsTwin-Star International ManualsElectronicsSOUND SYSTEM

Operation Instruction

Wiring

1. L AUX IN R - RCA plug AUX IN for connecting to an audio source

2. DC 16V IN - Connect the power supply

3. SUB OUT - Subwoofer output for connecting to a subwoofer

4. OPTICAL IN - Input the console using Optical cable

5. Wireless subwoofer connection (USB) port:

Will power and support transmit bass from optional Bell'O Digital wireless RF USB

Dongle to Bello digital Wireless RF Subwoofer.

Adapter Input AC100-240V, 50/60Hz

Adapter Output DC16V/ 3.0A

Power Consumption 40 Watts

Standby Power Consumption < 1 W

Peak Music Power Output 200 W

Summary of content (5 pages)

PAGE 1
Operation Instruction Adapter Input AC100-240V, 50/60Hz Adapter Output DC16V/ 3.0A Power Consumption 40 Watts Standby Power Consumption <1W Peak Music Power Output 200 W Wiring 1. L AUX IN R - RCA plug AUX IN for connecting to an audio source 2. DC 16V IN - Connect the power supply 3. SUB OUT - Subwoofer output for connecting to a subwoofer 4. OPTICAL IN - Input the console using Optical cable 5.
PAGE 2
Operation Instruction 1. Button - Turns the unit 2. Button - To scroll through the BT - Bluetooth AU - AUX Input OP - Optical Input 3. Button – volume increase Control Panel 4. Button - volume decrease 5. Button- 6. Button- Play/Pause 7.
PAGE 3
Operation Instruction Continued Select an input:Use the Button on the control panel to scroll through the inputs, or select the input on the remote control. Bluetooth Pairing Process: 1) Make sure your wireless device is ready for pairing. If you are unsure how to do this, check the manual that came with your device. 2) To start the pairing process: Control Panel: or Remote: Pairing: when it is paired. NOTE:Only 1 device can play through the sound shelf at a time.
PAGE 4
Operation Instruction Continued Learning Function (Note: Remote must send infrared signals). Any unused button on your TV remote control can be used to control the Sound Shelf. For example, when you connect your TV to the Sound Shelf using the RCA Stereo cables or Digital Fiber Optic Cable the TV volume and mute will no longer be controlled by the remote that came with it. Some TV remotes also come with extra Some of the programmable functions need to be selected from the remote control as noted below.
PAGE 5
Waring This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.