Instruction Manual 1T-VS-558 PC/HD/DVI Scaler
Table of Contents 1.0 Introduction 2 2.0 Specifications 3 3.0 Checking Package Contents 5 4.0 Connecting The Hardware 5 5.0 Operating The Unit 7 6.0 Troubleshooting 12 7.0 Limited Warranty 13 8.0 Regulatory Compliance 13 9.
1.0 INTRODUCTION The 1T-VS-558 Video Scaler is a high bandwidth, professional Cross Converter for Analog and DVI formats. The unit has separate Analog and DVI inputs and outputs via HD-15 and DVI-I connectors respectively. It accommodates resolutions up to WUXGA and 1080p and allows conversion between them. The unit also accepts 480i/576i YUV interlaced analog component video, such as from a DVD Player for up-conversion.
2.
2.1Supported Input Formats and Resolutions The 1T-VS-558 accepts DVI and Analog PC plus Analog Component inputs via separate connectors. The resolutions and formats processed for these inputs are as follows: Resolution 480i 720x480 576i 720x576 480p 720x480 576p 720x576 720p 1280x720 1080i 1920x1080 1080p 1920x1080 VGA 640x480 SVGA 800x600 XGA 1024x768 SXGA 1280x1024 UXGA 1600x1200 WXGA 1280x800 WXGA+ 1440x900 WSXGA 1680x1050 WUXGA 1920x1200 V.
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: 1x 1T-VS-558 Scaler 1x Power Supply 1x IR Remote Control 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately.
1 1 2 3 4 5 6 2 3 4 5 6 Power Adaptor Jack – Connect the provided AC Adaptor here. DVI Output – Connect to DVI capable device. PC Out (RGB). Connect to PC Monitor or RGB capable Projector. DVI In – Connect to output from DVI capable device. PC In – Connect to a PC’s VGA (Monitor) out. Component Video In Connect the appropriate cables to the desired connector. Use only the highest quality cables for the input and output connections.
5.0 OPERATING THE UNIT The 1T-VS-558 can be operated from either the front panel controls or via the included Infrared Remote Control. Since Infrared is the control method used most often by the majority of users, please take the time to familiarize yourself with the location and function of the various control buttons on the Controller.
5.1.1 Menu Navigation: If you are using the front panel control method, you can select the desired function by pressing the top of the Joystick immediately above the MENU legend to bring up the On Screen Display and then move the Joystick to navigate to the desired function. Once at the desired function, press the top of the Joystick to make the selection and then move the Joystick (left or right) to make the actual adjustment.
The Video and PC menus appear when Video or PC modes is selected as an input. Depending on the mode, additional functionality will be exposed when the following functions are selected: Picture Mode: User, Standard and Movie., Scale: Overscan, Underscan Letterbox and Full Screen., Noise Reduction: Low, Middle, High and Off. The Color sub-menu calls up four presets that cause the picture to take on a specific characteristic. Some people prefer the picture to have a slightly reddish (“Warm”) appearance.
(A) Set Command Command Code Response Description S POWER 0 > POWER OFF POWER OFF S POWER 1 > POWER ON POWER ON S SOURCE 0 > SOURCE COMP COMP INPUT S SOURCE 1 > SOURCE PC PC INPUT S SOURCE 2 > SOURCE DVI DVI INPUT S OUTPUT 0 > OUTPUT NATIVE NATIVE RESOLUTION OUTPUT S OUTPUT 1 > OUTPUT VGA VGA RESOLUTION OUTPUT S OUTPUT 2 > OUTPUT SVGA SVGA RESOLUTION OUTPUT S OUTPUT 3 > OUTPUT XGA XGA RESOLUTION OUTPUT S OUTPUT 4 > OUTPUT SXGA SXGA RESOLUTION OUTPUT S OUTPUT 5 > OUTPUT UXGA
S HUE 0~100 > HUE 0~100 HUE 0~100 ADJUST [Defaut:50] S SATURATION 0~100 > SATURATION 0~100 SATURATION 0~ 100 ADJUST [Defaut:60] S SHARPNESS 0~100 > SHARPNESS 0~100 SHARPNESS 0~100 ADJUST S NR 0~3 > NR OFF~HIGH 0:OFF ; 1:LOW ; 2:MIDDLE ; 3:HIGH ,NR CONTROL S PCHPOSITION 0~100 > PCHPOSITION 0~100 H POSITION 0~100 ADJUST S PCVPOSITION 0~100 > PCVPOSITION 0~100 V POSITION 0~100 ADJUST S PCCLOCK 0~100 > PCCLOCK 0~100 PC MODE COLCK 0~100 ADJUST S PCPHASE 0~63 > PCPHASE 0~63 PC MODE PHASE
R PCCLOCK > PCCLOCK 0~100 SHOW PC COLOK STATUS R PCPHASE > PCPHASE 0~63 SHOW PC PHASE STATUS R COLORTEMP > COLORTEMP NORMAL~USER SHOW COLOR TEMP STATUS R RED > RED 0~100 SHOW COLOR TEMP RED STATUS R GREEN > GREEN 0~100 SHOW COLOR TEMP GREEN STATU S R BLUE > BLUE 0~100 SHOW COLOR TEMP BLUE STATUS R OSDHPOSITION > OSDHPOSITION 0~100 SHOW OSD H-POSITION STATUS R OSDVPOSITION > OSDVPOSITION 0~100 SHOW OSD V-POSITION STATUS R OSDTIMEOUT > OSDTIMEOUT 0~100 SHOW OSD TIMEOUT STATUS R OSDB
7.0 LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1. TV One branded products based on TV One’s CORIO technology are warranted for a period of five years from the date of purchase. This includes products with the model number prefix of C2, 1T-C2, CX, A2 or S2. 2.
8.0 REGULATORY COMPLIANCE The 1T-VS-558 has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. These Products and Power Adapters are RoHS Compliant. 9.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact TV One at the appropriate location.
15