Instruction Manual 1T-MX-3344 4x4 Matrix Switcher Component Video with Stereo Audio
Table of Contents 1.0 Introduction 2 2.0 Specifications 3 3.0 Checking Package Contents 4 4.0 Connecting The Hardware 4 5.0 Operating The Unit 5 6.0 Troubleshooting 7 7.0 Limited Warranty 8 8.0 Regulatory Compliance 8 9.
1.0 INTRODUCTION Thanks for purchasing this 4x4 Matrix Switcher for Component Video with Stereo Audio from TV One. The 1T-MX-3344 is designed to allow distribution of four Component Video and Stereo Audio sources to four devices independently. Our professional video conversion products have been serving the industry for over twenty years.
2.
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: 1x 1T-MX-3344 Matrix Switcher 1x AC Power Adapter 1x RC-44 IR Remote Control 1x Rack Mount Kit 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately.
If you are using the RS-232 control function, connect the RS-232 cable at this time. Turn the input and destination equipment on and then turn on the 1T-MX-3344 Matrix Switcher. 5.0 OPERATING THE UNIT The 1T-MX-3344 is a special type of Video/Audio switcher called a Matrix Routing Switcher. A Matrix Switcher allows any input to be routed to any (or all) outputs whereas a regular routing switcher only allows the operator to select an input that will be sent to one, dedicated output.
5.2 Control via the Infrared Controller The included RC-44 Infrared Remote Controller has a Power Switch at the top right that can be used to turn the 1T-MX-3344 on and off. Beneath that switch you’ll find four rows of selector buttons. The top row controls selections for output number one, the second row controls input selections for output two and the third and fourth rows control input selections for outputs number three and four respectively.
RS-232 transmission format: Baud Rate: 9600 bps Data bit: 8 Bits Parity: None Stop Bit: 1 bit The RS-232 control codes used by the 1T-MX-3344 are as follows: Code P0 P1 ST VR A1 A2 A3 A4 B1 B2 B3 B4 C1 C2 C3 C4 D1 D2 D3 D4 A Carriage Return is not required. 6.
7.0 LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1. TV One branded products based on TV One’s CORIO technology are warranted for a period of five years from the date of purchase. This includes products with the model number prefix of C2, 1T-C2, CX, A2 or S2. 2.
8.0 REGULATORY COMPLIANCE The 1T-MX-3344 has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. These Products and Power Adapters are RoHS Compliant. 9.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact TV One at the appropriate location.
