Instruction Manual 1T-CT-631, 1T-CT-632 HDMI to CAT.
Table of Contents 1.0 Introduction 2 2.0 Specifications 4 3.0 Checking Package Contents 5 4.0 Connecting The Hardware 5 5.0 Operating The Unit 7 6.0 Troubleshooting 7 7.0 Limited Warranty 8 8.0 Regulatory Compliance 9 9.
1.0 INTRODUCTION Thanks for purchasing these 1T-CT-630 Series HDMI Extender products from TV One. The individual components of this HDMI to CAT.6 Extender system consist of the 1TCT-631 Transmitter and the 1T-CT-632 which constitutes a system used to transmit deep color (12 bits) v1.3 HDMI or DVI-D signals at resolutions up to 1920x1200 and 1080p, plus transmission of embedded lossless audio, over one Cat.6 cable.
1.2 Features This series of HDMI to CAT.6 Extender systems have many features that enable them to perform in a superior manner. Among these features you will find: Resolutions to 1920x1200, 1080p @ 60Hz 1080p signal distribution up to 38 meters (125 feet) Supports Embedded HDMI v1.3 Lossless Digital Audio Compliant with HDMI v1.3, HDCP 1.1 and DVI 1.
2.0 SPECIFICATIONS Video I/O 1T-CT-631 Tx-HDMI Input 1T-CT-632 Rx-HDMI Output Cat.6 I/O 1T-CT-631 Tx – Cat.6 Output 1T-CT-632 Rx – Cat.6 Input Cat.6 Structure Video Connector Supported Signals & Protocols Industry Standards Video Performance Maximum Resolution Video Bandwidth Maximum Range 1T-CT-631/632 System 1x via HDMI Connector 1x via HDMI Connector 1x via RJ-45 (Video & Embedded Audio) 1x via RJ-45 (Video & Embedded Audio) HDMI Video/Audio Signal HDMI v1.3, HDCP 1.1, DVI 1.
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: 1x Transmitter 1x Receiver 1x Power Adapter 1x Operations Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately. Have the Model and Serial Number and Invoice available for reference when you call. 4.
4.2 1T-CT-631 Transmitter Connect the HDMI source device’s output to the HDMI IN connector of the 1T-CT-631 Transmitter, using an appropriate HDMI cable of no more than 10 meters (33’) in length. Connect a Cat.6 cable to the Cat.6 output connector of the Transmitter. Defer connecting the AC adapter until the Cat.6 cable is connected to both the Transmitter and the Receiver. 4.3 1T-CT-632 Receiver At the remote location, connect the Cat.6 cables to the Cat.6 input of the Receiver.
Connect the HDMI Out connector of the Receiver to the HDMI input of the remote display or other device, using an appropriate cable no more than 10 meters (33’) in length. Connect the supplied AC adapters first to the Transmitter and Receiver and then to the AC sockets. Lastly, turn on the source device and remote display. The source signal should now appear on the remotely located display. If not, consult the Troubleshooting section of this manual.
7.0 LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1. TV One branded products based on TV One’s CORIO technology are warranted for a period of five years from the date of purchase. This includes products with the model number prefix of C2, 1T-C2, CX, A2 or S2. 2.
8.0 REGULATORY COMPLIANCE The 1T-CT-630 Series HDMI to Cat.6 Extender products have been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. This Product and Power Adapter is RoHS Compliant. 9.