Installation Instructions
Table Of Contents
- 页 1
- 书签F40155C3 \(2\)
- 书签A3A77A14 For Models : 6736279, 6736280
- 书签9D6F48C2 6736281, 6736282
- 书签68EEE381 6736283
- 书签50F01D0A Abbeville
- 书签44FD822B Single Handle Lavatory Faucet, Easy-Clean Push Style Pop-Up with "Drain Shield"
- 书签24B8C615 connections with Teflon tape. Always wrap in a clockwise direction.
- 书签DB20CE8C TUSCANY
- 页 2
- 书签95DED8C8 Waterway
- 书签B4D22DD2 O-ring
- 书签74F73BE4 O-ring
- 书签C57D3D55 Body
- 书签542D1CAF Metal Washer
- 书签448E0F1E Lock Nut
- 书签3754B117 Handle
- 书签74058310 Aerator
- 书签E89032A3 Set Screw
- 书签500BF842 Handle Button
- 书签7516F3F3 Deck Plate
- 书签BAED7338 Gasket
- 书签B9AC2A11 Cartridge
- 书签9B1F36B6 Flow Restrictor
- 书签80D0AB35 Mounting Bolt
- 书签D27B763B Lock Nut
- 书签3F5EBE9F Trim Cap
- 书签1D9D1EDE 1
- 书签5DFA01DE 2
- 书签DFFB09C3 3
- 书签595B7380 4
- 书签DB501EE4 5
- 书签CF450D8A 6
- 书签3C403E9C 7
- 书签E84027EA 8
- 书签95A0CB05 9
- 书签980FA6C3 10
- 书签D1C5E137 11
- 书签1C86D164 12
- 书签26B73C5D 13
- 书签82328AF0 14
- 书签485A0A88 15
- 书签DC70A005 16
- 书签21FCE293 17
- 书签195D271F 18
- 书签DD523969 19
- 书签1EB42EDF 20
- 书签56D51116 21
- 书签A8AB30E1 22
- 书签7106DD6A 23
- 书签82AC80E3 24
- 书签1330D2A0 25
- 书签2F40EDDD 26
- 书签E94B49A0 27
- 书签95328DF1 28
- 书签CE272524 29
- 书签11B8B2B9 30
- 书签FBEEBBF1 31
- 书签DC6B9863 32
- 书签0E6C35BD Part Name
- 书签D736EB42 No.
- 书签F853524F 1
- 书签8F5BAAD1 2
- 书签D3FA42E6 3
- 书签5776217B 4
- 书签C31C6630 5
- 书签34ACA688 6
- 书签92183895 7
- 书签50D9D766 8
- 书签3669CC2F 9
- 书签791FD3D8 10
- 书签3C3F9274 11
- 书签A45A0712 12
- 书签DF30A4A5 13
- 书签C927F1BD 14
- 书签96A32BD1 15
- 书签68371623 16
- 书签8BB03E94 17
- 书签AB65AA8D 18
- 书签D91E97FA 19
- 书签641FEDD7 20
- 书签864DEDDA 20
- 书签8CD135B6 21
- 书签43838F49 22
- 书签596069D0 23
- 书签D064DA16 25
- 书签FB7759BA 24
- 书签3308214F Allen Wrench
- 书签A61D9AA8 O-ring
- 书签F52467D0 Screw
- 书签24FEA4A7 Screws
- 书签D94DCDDB Base
- 书签051306A4 O-ring
- 书签79E37BAD Screen Filter
- 书签9C0EDBBC Socket Wrench
- 书签D337AE41 Cover
- 书签E2215261 Washer
- 书签47437815 Stopper Core
- 书签0FB30D18 Stopper Housing
- 书签8F3B1AD2 Small Washer
- 书签67E264F6 Large Washer
- 书签DD93D219 Lock Nut
- 书签CDF3DDF8 32
- 书签EFE92C47 31
- 书签D7038274 30
- 书签2DD737E7 29
- 书签3F1F6CCE 28
- 书签ECBCFB5D 27
- 书签7F718B03 26
- 书签54C099A9 15
- 页 3
- 书签1228565A 1. Shut off the water supplies before installation. Remove the current faucet. Clean and dry the surface the new faucet will be installed on. Note: This faucet fits 3 cm/1-3/16" countertops.
- 书签65F6EFE2 16
- 书签664F9E7F 22
- 书签F3430DF5 21
- 书签21D05849 23
- 书签E46D2BE0 4. Apply Teflon tape to the threads of the waterway \(#9\) in a clockwise direction.
- 书签A76C8816 5. From underneath the sink, slide the metal washer \(#21\) onto the mounting bolt \(#22\). Screw on the lock nut \(#23\), then tighten using the socket wrench \(#25\). Hint: Have someone hold the faucet body \(#12\) in place while tightening.
- 书签D8DB3B75 Step 1-5
- 书签DDEC183E 25
- 书签25B1C6C8 17
- 书签7F83EE60 18
- 书签CE58A4E9 19
- 书签4A0AADA0 17
- 书签EC70DB19 9
- 书签E7C4D439 12
- 页 4
- 书签D6A73E73 29
- 书签3A9839D4 30
- 书签60765E0B Installation Instructions
- 书签0216E1C5 6. Slip ½" coupling nuts onto the water supply tubes or use flexible stainless steel supply lines \(recommended\) - both are sold separately. Use two wrenches \(as shown\) to keep from twisting the supply tube off of the faucet when tightening the nut.
- 书签D5E3A824 7. Apply Teflon tape onto the threads of the faucet water shut offs in a clockwise direction. Tighten the water supply hoses onto the water supply shut offs. Be sure to connect the cold water supply hose to the cold water shut off \(typically on the right\) and the hot water supply hose to the hot water shut off \(typically on the left\).
- 书签DC6CBE8A Step 6-10
- 书签9FECC8B3 29
- 书签B01F3DF1 9. Remove the old drain assembly. Clean the surface to remove the old adhesive and dirt before installing the new drain. Dry the area thoroughly.
- 书签632F5880 26
- 书签52F661E7 30
- 书签ACF5F67C 31
- 书签AED57D2B 32
- 书签7A7C13B9 8. Remove the lock nut \(#32\), large washer \(#31\), and small washer \(#30\) from the drain assembly. Note: Before installation, verify there is no damage to the drain. If there is damage, call customer service for a replacement. Do NOT install damaged parts.
- 书签CFD9256B 10. Place a ring of silicone sealant around the small washer \(#30\) on the stopper housing \(#29\) or the drain opening of the sink. Insert the stopper housing \(#29\) into the drain hole from the top.
- 页 5
- 书签E2D4CBDB 29
- 书签F7B8BC3A 31
- 书签D29F140C 32
- 书签63FCB8D7 Installation Instructions
- 书签F87C8DD8 12. Open the hot and cold shut offs and check for leaks. If a leak occurs, refer to step 6 or 7.
- 书签35D4DB8D 14. Turn on both the hot and cold water and let it run for one minute. This will help clear any debris that may have come loose during installation and prevent the system from becoming clogged. Turn off the water.
- 书签54BCEE93 Step 11-14
- 书签1A5AEC2F 13. Close the drain and fill the sink with water. Check for leaks. If water is leaking from the drain, refer to step 10 or 11.
- 书签182B94DD 11. From underneath the sink, slide the large washer \(#31\) onto the stopper housing \(#29\), then screw on the lock nut \(#32\) hand tight. Do not over tighten. See the diagram for a visual.
- 页 6
- 书签82260E61 Revised on 07/01/2020
- 书签5F9C85AE Turn off the water supplies. Turn on the handle \(#1\) to release the pressure, then close the handle \(#1\). Remove the handle \(#1\) and trim cap \(#4\). Tighten the lock nut \(#5\). Reinstall the trim cap \(#4\) and handle \(#1\). Turn the water supplies on.
- 书签17B7B692 The lock nut \(#5\) has come loose.
- 书签3F03BA34 Dirty or damaged cartridge \(#6\).
- 书签7C64BD2F Turn off the water supplies. Turn on the handle \(#1\) to release the pressure, then close the handle \(#1\). Remove the handle \(#1\), trim cap \(#4\), lock nut \(#5\), and cartridge \(#6\). Check the ceramic disk for dirt and damage. Replace the cartridge \(#6\) if damaged. If the cartridge \(#6\) is dirty, soak it in warm white vinegar for 4 hours. Every 30 minutes, while the cartridge \(#6\) is completely submerged, turn the stem on and off 10 times. Reinstall the cartridge \(#6\), lock nut \(#5\), trim cap \(#4\), and handle \(#1\). Turn the water supplies on.
- 书签EB5875EA Troubleshooting
- 书签FFBC5D50 Leaks underneath the handle \(#1\).
- 书签64250EE3 The water will not shut off completely.
- 书签075AA153 Screen filter \(#20\) is dirty.
- 书签BBD13575 Turn off the water supplies. Turn on the handle \(#1\) to release the pressure, then close the handle \(#1\). Disconnect the supply lines from the waterway \(#9\) and remove screen filters \(#20\). Keeping the raised face of the screen filter \(#20\) downward, clean the screen filter gently with a soft bristled brush. Reinstall the screen filters \(#20\) and supply lines. Open the hot and cold shut offs. Check for leaks. \(Refer to step 6 for instructions on reinstalling the supply lines.\). Turn the water supplies on.
- 书签AB236213 Faucet has an inconsistent water flow.
- 书签3378807A The manufacturer warrants that the parts and assemblies of this product will be free from defects in material and workmanship under normal household use for as long as it is owned by the original consumer purchaser. This warranty covers the original purchaser with original receipt only and does not include business, commercial or industrial use of this product. This warranty shall not apply to goods which have been subject to accidents, negligence or improper installation. Our responsibility under this warranty is limited only to the replacement of parts and no other costs. Should a malfunction occur within the time covered by this warranty, replacement parts may be obtained from Customer Service Department 1-800-626-3525 or email warranty@cmiproduct.com. The manufacturer will, at its discretion, provide replacement parts for installation by consumer for any parts that prove defective under normal usage and care with new or equivalent parts.