Installation Instructions

Easy Off Hinge Installation—Plastic Hinges
1. Open the hardware pack and remove the mounting tray for the hinge. If the non-skid rubberized
pad is not attached to the bottom of the tray, insert the post into the mounting holes.
2. Place the mounting tray in the hinge.
Caution – do not close the cover of the hinge.
3. Place seat on bowl while carefully aligning seat with bowl.
4. Insert bolts through the mounting holes in the hinges and the two on the back of toilet bowl.
5. Thread the nuts on to the bolts and tighten until each nut is firmly seated.
6. Use a screwdriver to tighten bolt.
7. Close cover of mounting hinge.