User's Manual

RRDR-01 2.4GHz RF module- User’s manual - page 1 / 2

RRDR-01 2.4GHz RF module- User’s manual – Feb 09, 2015

A. Package list

Please check contents when received the RRDR-01 RF module board.

contents

quantity

remark

RRDR-01

4-pin to USB type A

male USB cable

Note, the 2

USB cable is optional

User’s manual sheet

This manual

B. Introduction

RRDR-01 board is a dual-channel 2.4GHz RF transmitter and receiver board working as an independent

module with 2x USB 2.0 interfaces on it.

In other words, it can be connected to the USB host port of any host system like windows PC, MAC PC,

industrial PC, embedded CPU board, etc.

C. Block diagram

PAGE 1
RRDR-01 2.4GHz RF module- User’s manual - page 1 / 2 RRDR-01 2.4GHz RF module- User’s manual – Feb 09, 2015 A. Package list Please check contents when received the RRDR-01 RF module board. contents quantity remark 1 RRDR-01 1 2 4-pin to USB type A male USB cable 1 Note, the 2nd USB cable is optional 3 User’s manual sheet 1 This manual B. Introduction RRDR-01 board is a dual-channel 2.4GHz RF transmitter and receiver board working as an independent module with 2x USB 2.0 interfaces on it.
PAGE 2
RRDR-01 2.4GHz RF module- User’s manual - page 2 / 2 D. Board picture ANT 2 ANT 1 NRF 24L01 NRF 24L01 MCU USB 2 USB 1 E. How to use 1. There are two independent RF channels on RRDR-01 module board and two USB ports for connection to host PC. 2. Connect either of the USB port to any host PC like window PC, MAC PC, Industrial PC or embedded computer through USB cable 3.
PAGE 3
NOTICE: This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.