User Manual

ManualsBrandsTurning Technologies ManualsElectronicsTurning

TurningQuickStartGuide



Overview

TurningisahighperformanceWi‐FiAccessPointcombinedwithaTurningTechnologiesRFreceiver.As

anaccesspoint,Turningsupportsthe802.11a/b/g/nIEEEstandardandwillsupport60simultaneous

clientconnectionsinthe2.4GHzISMband.InadditiontoWi‐Fiaccesspointfunctionality,theTurning

TechnologiesRRDR

‐01RFdual‐radioreceiversupportsdatacollectionfromTurningTechnologies

responsedevicesandpollingapplications.Theincludedstoragealsoprovidesdeliveryofclassroom

contentregardlessofconnectivityexternaltotheclassroom,thusprovidingareliableclassroom

networkforadministeringlearningcontentandengagingstudentsviaTurningTechnologiesofferings.

Summary of content (10 pages)

PAGE 1
Turning Quick Start Guide Overview Turning is a high performance Wi‐Fi Access Point combined with a Turning Technologies RF receiver. As an access point, Turning supports the 802.11 a/b/g/n IEEE standard and will support 60 simultaneous client connections in the 2.4GHz ISM band. In addition to Wi‐Fi access point functionality, the Turning Technologies RRDR‐01 RF dual‐radio receiver supports data collection from Turning Technologies response devices and polling applications.
PAGE 2
Hardware The Turning model RRAP‐01 enclosure exposes two connectors and three LEDs. Connectors The RJ‐45 connector is for connecting to a Wide Area Network (WAN) and optionally powering the unit. Thee RJ‐45 connector supports 10/100/1000 Base‐T Ethernet. The RJ‐45 connector also supports Power over Ethernet (POE). If the network wiring supports POE this is the only connection needed. A power connector jack is also provided to support installations without POE wiring.
PAGE 3
• An RJ‐45 ethernet connector o • A mini USB connector – USB to Serial bridge o • bridged to the Wi‐Fi network (10.4.0.
PAGE 4
• Find the “RRAP…” connection, select it and click Connect • When Prompted, enter the password “Turn1ngT3ch”
PAGE 5
Web Based Configuration Once connected to the access point, its web based configuration may be used to configure the Wi‐Fi and system settings. To access the Web Based Configuration open an internet browser and enter the address “10.4.0.1:10000” A login dialog is displayed. Enter the default username “root” and the default password “root” for the password.
PAGE 6
After a successful login you will be brought to the system status page
PAGE 7
Connecting with SSH For advanced configuration and usage a secure shell (SSH) connection is available at the default IP address of “10.4.0.1”. The super user account “root” can be accessed with the default password “Sassafras”. The following screen shots illustrate making an SSH connection with “Tera Term”, a freely downloadable terminal emulation program.
PAGE 8
PAGE 9
PAGE 10
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment.