User's Manual

ManualsBrandsTurning Technologies ManualsElectronicsLow Power RF Module

Rhein Tech Laboratories, Inc. Client: Turning Technologies, LLC

360 Herndon Parkway Model: RCQR01

Suite 1400 Standards: FCC 15.249/IC RSS-210

Herndon, VA 20170 ID’s: R4WRCQR01/5994A-RCQR01

http://www.rheintech.com Report #: 2014063

Page 38 of 55

Appendix M: Manual

Please refer to the following pages.

Summary of content (6 pages)

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix M: Client: Turning Technologies, LLC Model: RCQR01 Standards: FCC 15.249/IC RSS-210 ID’s: R4WRCQR01/5994A-RCQR01 Report #: 2014063 Manual Please refer to the following pages.
PAGE 2
USER MANUAL RCQR01 RF Module
PAGE 3
Revision History: ii Rev Date A 4/21/2014 Description
PAGE 4
Table of Contents 1.0 RCQR01 RF MODULE ....................................................................................................................................... 4 1.1 DESCRIPTION ....................................................................................................................................................... 4 1.2 FCC, IC COMPLIANCE INFORMATION .................................................................................................................. 4 1.
PAGE 5
1.0 RCQR01 RF Module 1.1 Description The RCQR01 is a low power wireless response keypad module. The RCQR01 module is used to interact with an audience so they can provide real time feed back to questions. It communicates at 2.4GHz, GFSK to a base station. The overall operation of the RCQR01 module is controlled by a single chip microcontroller-transceiver IC. This microcontroller-transceiver is powered from approximately 3V and uses a 16MHz reference.
PAGE 6
1.4 FCC/IC Compliance Changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.