Quick Start Guide

ManualsBrandsTurnils North America ManualsElectronicsAMP Bridge

U.S. Radio Frequency FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

ISED RSS Warning:

This device complies with Innovation, Science and Economic Development Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device. Le présent appareil est conforme aux CNR

d’ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de

l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

d’en compromettre le fonctionnement.

FCC SAR Warning:

RF Exposure Information (SAR): The SAR limit of USA (FCC)is 1.6W/Kg averaged over one gram

of tissue.

Product Type: AMP Bridge (FCC ID: 2AU29AMPRFWIFIUSB) has also been tested against this

SAR limit. The device was tested for typical body-worn operations to keep the AMP Bridge at

least 5mm from the body. When worn on body must be correct back clip for this product, use

of non-approved accessories may result in exposure levels which exceed the uncontrolled

environmental RF exposure limits.

ISED SAR Warning:

The SAR limit of IC is 1.6W/Kg averaged over one gram of tissue.

Product Type: AMP Bridge, model number: AMP USB Bridge Wiﬁ and RF (IC: 25624-AMPRFWIFI)

has also been tested against this SAR limit. The device was tested for typical body-worn

operations to keep the AMP Bridge at least 5mm from the body. When worn on body must be

correct back clip for this product, use of non-approved accessories may result in exposure levels

which exceed the uncontrolled environmental RF exposure limits.

Le SAR de IC est limité à 1.6w / kg, avec une moyenne par gramme. Produits Type: AMP Bridge,

type: AMP USB Bridge Wiﬁ and RF (IC: 25624-AMPRFWIFI) a également été testé pour la limite

SAR. Ce dispositif est utilisé pour tester des opérations d ‘usure corporelle typiques et des

opérations en direction du Haut de physique, de manière à maintenir une distance d’ au moins

5mm entre le AMP Bridge et le visage. Osure.`

Quick Start Guide for

AMP

™

USB Bridge

Product

Certification

AMP

™

USB Bridge allows the user to link their motorized Shades, Blinds,

and Draperies into a Wi-Fi network, enabling control via smart APP and

interaction with other IoT products.

Step 1 Download APP

Please scan the QR code below.

Step 2

Please scan the QR code below to learn more about linking the AMP

™

USB Bridge

with your home Wi-Fi router, setting up the AMP

™

APP, and establishing a connection

with other IoT applications.

Quick Start Guide for

AMP

™

USB Bridge

Product

Certification

AMP

™

USB Bridge allows the user to link their motorized Shades, Blinds,

and Draperies into a Wi-Fi network, enabling control via smart APP and

interaction with other IoT products.

Step 1 Download APP

Please scan the QR code below.

Step 2

Please scan the QR code below to learn more about linking the AMP

™

USB Bridge

with your home Wi-Fi router, setting up the AMP

™

APP, and establishing a connection

with other IoT applications.

Quick Start Guide for

AMP

™

USB Bridge

Product

Certification

AMP

™

USB Bridge allows the user to link their motorized Shades, Blinds,

and Draperies into a Wi-Fi network, enabling control via smart APP and

interaction with other IoT products.

Step 1 Download APP

Please scan the QR code below.

Step 2

Please scan the QR code below to learn more about linking the AMP

™

USB Bridge

with your home Wi-Fi router, setting up the AMP

™

APP, and establishing a connection

with other IoT applications.

Quick Start Guide for

AMP

™

USB Bridge

Product

Certification

AMP

™

USB Bridge allows the user to link their motorized Shades, Blinds,

and Draperies into a Wi-Fi network, enabling control via smart APP and

interaction with other IoT products.

Step 1 Download APP

Please scan the QR code below.

Step 2

Please scan the QR code below to learn more about linking the AMP

™

USB Bridge

with your home Wi-Fi router, setting up the AMP

™

APP, and establishing a connection

with other IoT applications.

AMP

™

Bridge

Quick Start Guide

Declarations Step 1

Step 2

AMP USB Bridge allows the user to link their motorized

Shades, Blinds, and Draperies into a Wi-Fi network enabling

control via smart APP and interaction with other IoT products.

Please scan the QR Code below to download the app.

Please scan the QR Code below to learn more about linking

the AMP USB Bridge with your home Wi-Fi router, setting up

the AMP APP, and establishing a connection with other IoT

applications.

Quick Start Guide for

AMP

™

USB Bridge

Product

Certification

AMP

™

USB Bridge allows the user to link their motorized Shades, Blinds,

and Draperies into a Wi-Fi network, enabling control via smart APP and

interaction with other IoT products.

Step 1 Download APP

Please scan the QR code below.

Step 2

Please scan the QR code below to learn more about linking the AMP

™

USB Bridge

with your home Wi-Fi router, setting up the AMP

™

APP, and establishing a connection

with other IoT applications.

Summary of content (2 pages)

PAGE 1
Please scan the QR code below. Declarations U.S. Radio Frequency FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 2
AMP™ Bridge Product Parameter Input Voltage 5V DC (USB Type A) Input Power 1000mA Shade Control Frequency 433.92 MHz Programming / Pairing: Press and hold programming button for about 2 seconds, then release until the LED blinks Reset: Press hold programming button for about 10 seconds, then(802.11b/g/n) release until the LED blinks 2.