Safety Instructions

0.6 50 1.1DV24AE/S-0.6/50
0.8 34 1.1DV24AF/S-0.8/34
0.6 34 1.1DV24AE/S-0.6/34
Features
* For reference only.
Following data for reference
Electronic Limit
Dual Shaft
Stall Protection
Limit Fine Adjustment
Speed Regulation
Built-in Receiver
Jog & Tilt
Program Button
Radio Lock
Reset to Factory Mode
Memorized Settings
Switch Direction
Preferred Stop Position
Low Power Consumption
Working temperature: -10᯦~ +55᯦
Rated Voltage: 12V
Radio Frequency: 433.925MHz
Thermal Protection time: > 6 minutes
-1- -2-
DV24AE/S
Power line
Signal line
P1 button
Motor Schematic
DV24AF/S
Power line
Signal line
P1 button
U-SHAPE
PLATE
ALUMINUM
VENETIAN
BLINDS
U-SHAPE
GROOVE
WALL
BRACKET
MOTOR
ROPE WINDER
MO
T
OR
ROPE
WINDER
BOTTOM
BEAM
SAFETY NOTE
1. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by
children without supervision.
4. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
5. WARNING: the drive shall be disconnected from its
power source during cleaning, maintenance and when
replacing parts.
6. The instructions shall state that the A-weighted emis
sion sound pressure level of the drive is equal to or
OHVVWKDQG%$HJE\ZULWLQJ/S$G%$
7. The mass and the dimension of the driven part shall be
compatible with the rated torque and rated operating
time.
8.
The type of driven part the drive is intended for.
9. WARNING: Important safety instructions. It is important
for the safety of persons to follow these instructions.
Save these instructions.
10. Do not allow children to play with fixed controls. Keep
remote controls away from children.
11. Frequently examine the installation for imbalance and
signs of wear or damage to cables and springs. Do not
use if repair or adjustment is necessary.
12. Watch the moving shutter and keep people away until
the shutter is completely closed.
13. WARNING: Important safety instructions. Follow all
instructions, since incorrect installation can lead to
severe injury.
14. Before installing the drive, remove any unnecessary
cords and disable any equipment not needed for
powered operation.
DV24AF/S , DV24AE/S
Instruction A-02
The motor is suitable for motorization of venetian blinds.
Fields of Application
Specifications
Model
Rated Torque
(N.m)
Rated Speed
(rpm)
Rated Current
(A)
Motor Installation
Caution
1. Do not expose motor to humid, damp or extreme temperature conditions.
2. Do not drill into motor.
3. Do not cut the antenna and keep it clear from metal objects.
4. Do not allow children to play with this device.
5. If power cable or connector is damaged, do not use.
6. Ensure correct crown and drive adaptor are used.
7. Ensure power cable and aerial is clear and protected from moving parts.
8. Cable routed through walls shall be properly isolated.
9. Motor is to be mounted in horizontal position only.
10. Before installation, remove unnecessary cords and disable equipment not needed for powered
operation.
11. Installation and programming to be performed by a qualified professional, use or modification outside
the scope of this instruction may void warranty.