{) Window Installation () Connect the Exhaust Hiss (3) Connect the Drain Hose (0) important Tips Before First Use (3 Altair APP Connection
{) Window Installation The window panel kit has been designed fo ft most standard windows hat open vertically or horizontally; however, It may be necessary for you to improvisational some aspect of tha Installation procedures for certain types of window. Minimum and maximum window openings: Inch inch £1. Cut the foam seal to the proper length and attach to the window sash. = Foam seal {adhesive type) Bb. attach the window panes to the window sash.
€. insert the metal locking screws to fix at the desired position. HOT: A plastic locking pin is hoking the window pane! kit together during shipment. Prior iv Installation, remove the plastic locking pine, adjust to desired length and use the provided metal locking screws to secures Plastic Fin. = ~~ C3 inch to inch (SO.50M 1 T199m) pose tor prong Hiss () Connect the Exhaust Hose COOL & DEHUMIDIFY MODE: Air exhaust hoes should be postponed to the portable ir conditions.
©. Affix the Hiss Outlet to the window anal. x NOTE: The exhaust hose can be compressed or extended moderately, but it is desirable to cheap the length to a minim urn. Also make sure that the hose does not have any sharp bends. NOT RECOMMENDED RECOMMENDED (5) Connect the Drain Hose MANUAL DRAINAGE in COOL mode and DRY mode, the drainage hiss is commended to be connected io the middies drain part.
CONTINUOUS DRAINING NOTE: Please be sure that the height of and section of the drain hose should not ke higher than that of the drain outs, or the water tank may not be drained important Tips Before First Use 8. Allow the unl to si upright for st least 3-hours before powering oe to allow the refrigerant io stabilize, b. Always perform a test of the LCD plug before uss.
3 Airmail APP Connection Using the AIR al APP to control your alr conditioner from your IP hons or Android device Sven when you are away from the house. @ Supported wireless buttress must have an available 2.4 GHz operating frequency @ Standard: [EEE 802.1 gigging $ Supported smart phone system: Android $.0 or later 0S 11.0 or later Please scan this GR aced to watch the step by step guiding dives 8. Scan this QR cote or search “AIR.
b. Launch the AIR al app and log In to your account (sign up for your first use) ©. Add your smart device manually. Please make sure the unit is plugged In and in stand-by meed. eng press "FEINT amid WT button on poltroon pans! about 5 seconds 1 switch on Be WiFi fund ion. {not powered on). Press "Portable Air Conditioner” button io continue.
@ Chooses the EZ Mode (Default), click the confirm option, and the Next button to continua. (Please notch that the indicator of this model would not blink rapidly} @ Choose your preferred WI-Fi and enter the password. Rags Next’ button to continua. B AIR zi starts connecting to your device. it may take some time, please wait patiently.
©. Ones you have set up the connection, you san mama your device and get started Foretaste ou conditioned Eo a Feel tees 10 explorers the sin control dashboard. To invite other phones to control this devious, press the button on up right and go fo ‘Share Device ‘Add Sharing < Seining Anaconda Dee ie ©. 1 you sill can't connect fo the app, you could long press Joi button on the control panel for § seconds 10 resat the WI-Fi signal. Kindly not that this unit will make no sound during this Step.