TURBOX C403-C DATASHEET
THUNDERCOMM Version Date V0.1 2019-11-01 V0.2 2020-02-01 TurboX C403-C Datasheet Description Initial Version 1.Added TurboX™C405 information and updated SoM pin definitions. 2. Added descriptions of HDMI, MIPI DSI, DECAP, Sleep Clock and SPMI interfaces. 1.SoM marking 5-3 V0.3 2020-02-06 V0.5 2020-02-20 Update in 4.16.2 BT Performance V0.6 2020-02-26 Update in 4.16.2 BT Performance V0.7 2020-03-16 Update in 5.2 Packagedimensions V0.8 2020-03-27 Update SDC2 performance description V0.
THUNDERCOMM TurboX C403-C Datasheet Contents 1 2 3 Overview ............................................................................................................................................................. 6 1.1 TurboX™ C40x Module Abstract ........................................................................................................ 6 1.2 Reference Documents ........................................................................................................................
THUNDERCOMM 4 5 6 TurboX C403-C Datasheet 3.3.15 Debug UART Interface .............................................................................................................. 34 3.3.16 PWM .......................................................................................................................................... 34 3.3.17 Sleep Clock ................................................................................................................................ 34 3.3.
THUNDERCOMM TurboX C403-C Datasheet Figure Figure 2-1 TurboX™ C40x SoM Hardware System Block Diagram ................................................................ 12 Figure 2-2 TurboX™ C40x SoM ....................................................................................................................... 13 Figure 3-1 TurboX™ C40x PIN Map (Top View) ............................................................................................. 15 Figure 3-3 Audio .................................
THUNDERCOMM TurboX C403-C Datasheet Table 3-12 SDIO interface definition ................................................................................................................ 29 Table 3-13 BLSP interface definition ................................................................................................................ 30 Table 3-14 Power on interface definition...........................................................................................................
THUNDERCOMM TurboX C403-C Datasheet 1 Overview 1.1 TurboX™ C40x Module Abstract TurboX™ C40x is high level performance intelligent module, integrating Android or Linux system, based on Qualcomm QCS40x processor. It includes a 64-bit Arm Cortex‑A53 qual-core (dual-core for C403) 1.4 GHz application processor, two Qualcomm® Hexagon™ QDSP6 v66 with Low Power Island and Voice accelerators. TurboX™ C40x integrated 2 × 2 ( or 1 × 1) WLAN 802.11 a/b/g/n/ac, Bluetooth v5.x specification.
THUNDERCOMM EBI TurboX C403-C Datasheet External bus interface GNSS Global navigation satellite system HDMI High-Definition Multimedia Interface LPDDR Low Power Double Data Rate LPI Low Power Island LCD Liquid crystal display MIPI-DSI Mobile Industry Processor Interface Display Serial Interface NFC Near field communicator PMIC Power Management Integrated Circuit OSC Oscillator PA Power amplifier PCB Printed circuit board PCIe Peripheral component interconnect express PCM Pulse-cod
THUNDERCOMM TurboX C403-C Datasheet I2S Inter-IC Sound I2C Inter-integrated circuit WCN Wireless connectivity network WLAN Wireless local area network SMPS Switched-mode power supply SOM System On Module RGMII Reduced gigabit media-independent interface 8
THUNDERCOMM TurboX C403-C Datasheet 2 TurboX™ C40x SoM Introduction 2.1 Key features The following table shows the detailed features and performance on TurboX™ C404 TurboX™ C405 and TurboX™ C403. Processors Applications Processor Arm Cortex-A53 microprocessor cores, 64-bit processor, Quad-core (Dual-core for C403) 1.4 GHz, Digital signal Two Qualcomm® Hexagon™ QDSP6 v66 with Low Power Island and Voice processing accelerators Operating System LE(Linux Enablement): QCS40X_2019.SPF.1.
THUNDERCOMM TurboX C403-C Datasheet 2.4G/5G, support 802.11 a/b/g/n/ac, 2 X 2 MIMO(WCN3999) WLAN 2.4G/5G, support 802.11 a/b/g/n/ac, 1 X 1 SISO(WCN3980) Support SoAP mode Support Bluetooth 5.x + HS Bluetooth BLE, Backwards compatible with Bluetooth 1.2, 2.X + enhanced data rate. Connectivity USB one USB 2.0 high-speed and one USB 3.0 super-speed PCIe 1x PCIe, PCIe v2 PHY and 2.1 controller Ethernet RGMI 1x Ethernet RGMII 4-bit, SD 3.
THUNDERCOMM TurboX C403-C Datasheet Other ADC Interface Support ADC interfaces used for input voltage sense, battery temperature detection and general purpose ADC Touchscreen support Capacitive panels via ext IC (I2C, SPI, and interrupts) Size: 33.8mm x 33.8mm x 2.6mm Physical size Weight: approx.
THUNDERCOMM TurboX C403-C Datasheet 2.2 Hardware Block Diagram C40x SOM MIPI DSI 0 QCS 403&404&405 SLIMBUS 8Gb+8GB SDC2 HDMI GPU: Adreno 306, 691MHz Display processor:1080p@30fps 5 x I2S 38.4 MHz SNPE DSP Hexagon V66M, 691 MHz, 1× HVX, 256 KB cache 3.8V 3A IO 1.8V 0.1A PMS405 WIFI/BT eMCP: CPU 4×A53, 1.4 GHz Soudwire DMIC EBI0+SDC1 Memory support EBI 1 SDC 1 SD3.0 DSP subsystem 38.4 MHz 1x V66L w/LPI VREG L7 1.8V 0.1A VREG L13 3.3V 0.1A (806 MHz, 1.5 MB) WIFI VREG L11 SDC2 0.
THUNDERCOMM TurboX C403-C Datasheet 2.3 TurboX™ C40xMajor Components Location TurboX™ C40x major components as below map. Figure 2-3 TurboX™ C40xKey component Location Figure 2-2TurboX™ C40x SoM Figure 2-3 TurboX™ C40xKey component Location Below table indicates connectors detail information. Part Reference Manufacturer Description U500 QCS403/404/405, Arm cortex-A53 processor. QUALCOMM U1100 PMS405, power management. QUALCOMM U1300 WCN3999 or WCN3980, single-die wireless local area network.
THUNDERCOMM TurboX C403-C Datasheet 3.1 Interfaces Parameter Definitions Symbol Description AI Analog input AO Analog output B Bidirectional digital with CMOS input DI Digital input(CMOS) DSI Supply voltage for MIPI_DSI I/Os; tied to VDD_MIPI (1.2 V only) DO Digital output(CMOS) H High-voltage tolerant Programmable pull resistor.
THUNDERCOMM TurboX C403-C Datasheet V_Internal Internally generated supply voltage for some power-on circuits V_Config Software configurable (3.6V or 1.8V) Table 3-1 Interfaces parameter definitions 3.2 Pin Description Figure 3-1TurboX™ C40x PIN Map (Top View) Pad# Function 1 MIPI_DSI0_CLK_M 2 MIPI_DSI0_CLK_P 3 GND 4 MIPI_DSI0_L2_M Voltage Type Function description MIPI display serial interface 0 clock negative. For TurboX™ C404 do not connect.
THUNDERCOMM 5 MIPI_DSI0_L2_P 6 GND 7 MIPI_DSI0_L3_M 8 MIPI_DSI0_L3_P 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 GND PCIE0_TX_P PCIE0_TX_M GND USB0_HS_DM USB0_HS_DP GND GPIO_35 GPIO_34 GND SPDIF_RX_COAX_RCA SPDIF_RX_COAX_EP GND GPIO_26 GPIO_27 GPIO_28 GPIO_29 GND GPIO_39 GPIO_40 GPIO_41 GPIO_42 GND LPI_GPIO_1 LPI_GPIO_2 LPI_GPIO_3 LPI_GPIO_4 GND LPI_GPIO_15 LPI_GPIO_14 LPI_GPIO_13 LPI_GPIO_12 LPI_GPIO_11 GND GPIO_97 GPIO_98 TurboX C403
THUNDERCOMM 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 GPIO_99 GPIO_100 GPIO_101 GPIO_102 GND ANT_WL_Chain 1 GND GND NC GND GND NC GND GND ANT_WL_Chain 0 GND GND GND GND GPIO_30 GPIO_31 GPIO_32 GPIO_33 GND GPIO_37 GPIO_38 GND GND GND VPH_PWR VPH_PWR VPH_PWR GND GND GND VPH_PWR VPH_PWR VPH_PWR VPH_PWR GND GND GND VPH_PWR TurboX C403-C Datasheet 1.8V 1.8V 1.8V 1.
THUNDERCOMM TurboX C403-C Datasheet 88 89 VPH_PWR VPH_PWR 3.8V 3.8V PI PI 90 VREG_L6_1P8 1.8V PO 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 GPIO_116 GPIO_115 GPIO_114 GPIO_113 GPIO_112 GPIO_111 GPIO_110 LPI_GPIO_18 LPI_GPIO_19 GND GPIO_96 GPIO_95 GPIO_94 GPIO_93 GPIO_92 GPIO_91 GPIO_90 GPIO_89 GPIO_88 GPIO_87 GND GPIO_43 GPIO_44 GPIO_45 GPIO_46 GND GPIO_50 GPIO_49 GPIO_48 GPIO_47 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V 1.
THUNDERCOMM TurboX C403-C Datasheet For TurboX™ C404 do not connect. HDMI clock positive. A7 HDMI_TCLK_P / / A8 HDMI_TX0_P / / A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 PCIE0_RX_M USB_SS_TX_M USB_SS_RX_P USB1_HS_DP GND SDC2_CLK SDC2_DATA_1 SDC2_DATA_3 GND GPIO_14 GPIO_16 USB1_HS_ID GPIO_21 GND GND GND GPIO_52 GPIO_54 GPIO_56 GPIO_58 GND / / / / DI DO DI IO PCIE receiver minus SDC2 SDC2 SDC2 IO IO IO Secure digital controller 2 clock 1.8V 1.8V 1.
THUNDERCOMM B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 C24 C25 USB1_HS_DM GND SDC2_DATA_2 SDC2_DATA_0 SDC2_CMD GND GPIO_15 GND USB0_HS_ID GND QCS_RESOUT_N GND GPIO_51 GPIO_53 GPIO_55 GPIO_57 GPIO_59 GPIO_119 PON_1 NC WCD_MCLK PM_GPIO_06 PM_RESIN_N KPDPWR_N PM_GPIO_04 NC GND VREG_L11_SDC2 VREG_L13_3P3 GND GPIO_61 GPIO_63 GPIO_65 GPIO_67 GND GPIO_70 GPIO_72 GPIO_74 GPIO_76 GND GPIO_22 GPIO_24 GND
THUNDERCOMM C26 C27 C28 C29 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 GPIO_17 GPIO_19 GND GPIO_118 PA_THERM1 SLEEP_CLK PM_GPIO_12 PM_GPIO_03 NC NC GND QCS_PS_HOLD GND VREG_L7_1P8 GND GPIO_60 GPIO_62 GPIO_64 GPIO_66 GPIO_68 GPIO_69 GPIO_71 GPIO_73 GPIO_75 GPIO_77 GND GPIO_23 GPIO_25 GND GPIO_18 GPIO_20 GPIO_117 GND GND GPIO_78 GPIO_79 GPIO_80 GPIO_81 SPMI_CLK_CON SPMI_DATA_CON LPI_GPIO_5 LPI_GPIO_20 GND TurboX C
THUNDERCOMM E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 E33 E34 E35 E36 E37 E38 E39 E40 E41 E42 G1 G2 G3 GPIO_86 GND GPIO_103 GND GPIO_104 GPIO_105 GPIO_106 GPIO_107 GPIO_108 GPIO_109 GND GND LPI_GPIO_6 LPI_GPIO_7 GND LPI_GPIO_8 LPI_GPIO_9 LPI_GPIO_10 GND GND GND GND JTAG_SRST_N JTAG_TCK JTAG_TDI JTAG_TDO JTAG_TMS JTAG_TRST_N GND GPIO_36 GND GND GND GND GND TurboX C403-C Datasheet 1.8V IO Can be configured as GPIO 1.8V IO Can be configured as GPIO 1.8V 1.
THUNDERCOMM TurboX C403-C Datasheet 3.3 Interfaces Detail Description 3.3.1 Power Supply Interface Below table describes all interfaces of SoM Power Supply. For the detail parameter request, please refer the chapter on Electrical specifications. Power Supply Pin Name PIN Location Type PI VPH_PWR Description Notes Power supply input for SoM all 74,75,76,80,81,82,83,87,88,89 operations. PO VREG_L6_1P8 90 Low voltage switch supply output 1.
THUNDERCOMM TurboX C403-C Datasheet 3.3.2 RGMII Interfaces The SoM supports RGMII interfaces can connect Ethernet transceiver. RGMII Interface Pin Name PIN Location Voltage Type Description GPIO_61 C13 1.8V DI Ethernet transceiver interrupt input GPIO_63 C14 1.8V DO RGMII transmit clock output GPIO_64 D14 1.8V DO RGMII transmit data 3 output GPIO_65 C15 1.8V DO RGMII transmit data 2 output GPIO_66 D15 1.8V DO RGMII transmit data 1 output GPIO_67 C16 1.
THUNDERCOMM TurboX C403-C Datasheet C40xSoM SLIMBUS QCS40x I2S Low power audio core SWR GPIO configurations DMIC Figure 3-2 Audio One portSerial low-power interchip media bus (SLIMBUS) interface is dedicate for external codec IC, which can build system’s audio functions. SLIMBUS Interface Pin Name PIN Location Voltage Type Description LPI_GPIO_2 33 1.8V DO Audio SLIMBUS clock LPI_GPIO_3 34 1.8V IO Audio SLIMBUS data0 LPI_GPIO_4 35 1.
THUNDERCOMM TurboX C403-C Datasheet GPIO_107 E18 1.8V IO I2S 3A Data1 GPIO_108 E19 1.8V IO I2S 3A Data2 GPIO_109 E20 1.8V IO I2S 3A Data3 GPIO_52 A25 1.8V DO I2S 3B SCK GPIO_53 B25 1.8V DO I2S 3B WS GPIO_54 A26 1.8V IO I2S 3B Data0 GPIO_55 B26 1.8V IO I2S 3B Data1 GPIO_56 A27 1.8V IO I2S 3B Data2 GPIO_57 B27 1.8V IO I2S 3B Data3 GPIO_110 97 1.8V DO I2S 4 SCK GPIO_111 96 1.8V DO I2S 4 WS GPIO_112 95 1.8V IO I2S 4 Data0 GPIO_113 94 1.
THUNDERCOMM TurboX C403-C Datasheet 3.3.5 USB Interface The SoM support USB host and slave. Dual USB port support, one is USB 2.0 high-speed, the other is USB 3.0 super-speed/USB 2.0 high-speed compliant. The USB1 support host mode only. SS/HS USB1 (3.0/2.0) Interface Pin Name PIN Location Voltage Type USB_SS_TX_M A10 Description Notes USB 3.0 transmitter differential DO pair minus USB_SS_TX_P B10 USB 3.0 transmitter differential DO pair plus USB_SS_RX_P A11 USB 3.
THUNDERCOMM TurboX C403-C Datasheet Table 3-7 PCIe interface definition 3.3.7 MIPI DSI Interface TurboX™ C405 support MIPI of display, and can be up to FHD 30 fps. This is one 4-lane MIPI DSI port, and supported only on TurboX™ C405.
THUNDERCOMM TurboX C403-C Datasheet 3.3.9 JTAG Interface The SoM has a JTAG interface for debug. JTAG Interface Pin Name PIN Location Voltage Type Description JTAG_SRST_N E33 - DI,PU JTAG reset for debug JTAG_TCK E34 - DI,PU JTAG clock input JTAG_TDI E35 - DI,PU JTAG data input JTAG_TDO E36 - - JTAG_TMS E37 - B,PU JTAG mode-select input JTAG_TRST_N E38 - DI,PD JTAG reset QCS_RESIN_N C2 1.8V DI QCS_PS_HOLD D8 Notes JTAG data output System reset input 1.
THUNDERCOMM TurboX C403-C Datasheet 3.3.11 BLSP Interface These GPIOs are available as BAM-based low-speed peripheral (BLSP) interface ports that can be configured for UART, SPI, or I2C operation. I2C is a two-wire bus that can be routed to multiple devices; each line of each bus is supplemented by a 2.2kΩ pull-up resistor. 2-wire UART Tx/Rx and I2C SDA/SCL ports can be used simultaneously.
THUNDERCOMM TurboX C403-C Datasheet 3.3.12 Power On Interface Dedicated PMIC circuits continuously monitor events that might trigger a power-on sequence. If an event occurs, these circuits power on the IC, determine the device’s available power sources, enable the correct source. There are two events that will be triggered. When insert battery or other power supply and pull down KPDPWR_N to ground,SoM will be power on automatically. It is longer than 1s with pressing power-on key, for power on event.
THUNDERCOMM TurboX C403-C Datasheet If reset is ignored, PMIC will force a reset event (selectable by software). ⚫ Stage 3 –hardware mandatory bite The user can generate a mandatory reset by a long key press of KYPD_PWR to resets PMIC back to factory default. Reset Pin Pin Name PIN Location Voltage Type C6 V_INT DI KPDPWR_N Description Notes Long press to reset PMIC. (active low) Table 3-14 Reset interface definition These reset triggers each have individual debounce and delay timers.
THUNDERCOMM TurboX C403-C Datasheet Boot Configuration Interface Pin Name GPIO_45 PIN Location Voltage Type 114 P3 IO GPIO_55 P3 B26 IO Description Notes Forced USB boot; Configurable I/O Fast boot select bit 0 (configure external boot device); WDOG_DISABLE.
THUNDERCOMM TurboX C403-C Datasheet GPIO_59 P3 B28 IO Fast boot select bit 8 (configure external boot device); Configurable I/O GPIO_46 P3 115 IO Fast boot select bit 9 (configure external boot device); Configurable I/O GPIO_79 P3 E3 IO Fast boot select bit 10 (configure external boot device); Configurable I/O GPIO_78 P3 E2 IO Fast boot select bit 11 (configure external boot device); Configurable I/O GPIO_47 P3 120 IO Fast boot select bit 12 (configure external boot device); Configurabl
THUNDERCOMM TurboX C403-C Datasheet Calibrated low-frequency RC oscillator, periodically uses the 38.4 MHz XO signal for calibration, achieving ■ accuracy suitable for the real-time clock. Using the 38.4 MHz XO circuit and dividing its output by 1172 to create a 32.7645 KHz signal. This signal is ■ used as the start-up sleep clock. SLEEP_CLK Pin Pin Name PIN Location SLEEP_CLK Voltage Type 1.8V D2 Description DO Notes 32.7 KHZ sleep output. Table 3-18 SLEEP_CLK definition 3.3.
THUNDERCOMM TurboX C403-C Datasheet 4 Electrical Characteristics 4.1 Absolute Maximum Ratings The SoM needs to be desinged in the operatin conditons which is shown as below table beyond its absolute maximum ratings may damage the device. Parameter Min Max Units Input Power voltage Voltage on any input or output pin -0.5 VPH_PWR+0.5 V VPH_PWR -0.5 6.0 V Table 4-1 Absolute rating condition 4.
THUNDERCOMM TurboX C403-C Datasheet VREG_L6_1P8 +1.8 - 100 Y 1.8V IO pull up voltage; VREG_L11_SDC2 +2.95 +1.8--+3.3 100 Y Power output for SD card data pull up VREG_L7_1P8 +1.8 +1.7--+1.89 100 N 1.8V LDO power output,100mA VREG_L13_3P3 +1.8 +1.8--+1.8 100 N 1.8V LDO power output,100mA Table 4-3 Output power 4.4 Digital-logic characteristics The digital I/O's performance depeds on its pad type, usage, and power supply voltage.
THUNDERCOMM TurboX C403-C Datasheet digital I/Ocharacteristics: Parameter Description Min Typical Max Units VIH High-level input voltage 1.27V/1.84V - 2.0V/2.98V V VIL Low-level input voltage -0.3 - 0.58/0.
THUNDERCOMM TurboX C403-C Datasheet Secure digital interface timing Parameter Description Min Typical Max Units DDR mode – SDC2, up to 50 MHz tchrd Command hold 1.50 - - ns tcsurd Command setup 6.30 - - ns tdhrd Data hold 1.50 - - ns tdsurd Data setup 2.00 - - ns tpddwr Propagation delay on data write 0.80 - 6.00 ns tpdcwr Propagation delay on command write -8.20 - 3.00 ns 4.5 USB THE SoMsupports USB standards and exceptions.
THUNDERCOMM Version 1.01.011 TurboX C403-C Datasheet manage data channels in the system. be greater than 20% * ■ No support for the elemental access mode for information and value VDD [V/ns] for the elements. 15 pF load condition. ■ No support for the following transport protocols.
THUNDERCOMM TurboX C403-C Datasheet I2S interface timing Parameter Description Min Typica Max Units 12.288 MHZ - ns l Using internal SCK F Frequency. Load capacitance is between 10 and 40pF. T Clock period. Load capacitance is between 10 and 40pF. 81.380 t(HC) Clock high. Load capacitance is between 10 and 40pF. 0.45 x T 0.55 x T ns t(LC) Clock low. Load capacitance is between 10 and 40pF. 0.45 x T 0.55 x T ns t(sr) SD and WS input setup time.
THUNDERCOMM TurboX C403-C Datasheet I2S interface frequencies Interface Frequency achieved I2S1 24.57 MHz I2S2 12.288 MHz I2S3A 12.288 MHz I2S3B 12.288 MHz I2S5 24.57 MHz I2S6 12.288 MHz 4.8 PDM THE SoMPDM interfaces for primary and secondary digital microphones. DMIC interfaces running at 9.6 MHz clock.
THUNDERCOMM TurboX C403-C Datasheet 4.9 I2C THE SoMI2C standards and exceptions: Applicable standard Feature exceptions I²C Specification, version 5.0, October 2012 None Table 4-10 I2C 4.10 SPI The following are the SPI features and comparisons: ■ Supports 4‐bit (MISO, MOSI, CS, CLK) synchronous serial data link. ■ Support for master-only mode, up to 50 MHz on all SPI interfaces. ■ Master device initiates data transfers; Multiple slave devices are supported by using chip-selects.
THUNDERCOMM TurboX C403-C Datasheet t(cl) Clock low 17 - - ns t(mov) Master output valid -5.0 - 5.0 ns t(mis) Master input setup 5.0 - - ns t(mih) Master input hold 1.0 - - ns Table 4-11 Current sink specification 4.11 Current Sink PM_GPIO_03 is capable of sinking current (up to 10 mA). In addition, since the PWM module can be routed to the current sink, different blinking and dimming patterns can be achieved.
THUNDERCOMM TurboX C403-C Datasheet 4.14 MIPI DSI THE SoMMIPI DSI standards and exceptions: Applicable standard MIPI Alliance Specification v1.01 for Feature exceptions None Display Serial Interface MIPI D-PHY Specification v0.65, v0.81, v0.90 Table 4-15 MIPI DSI standard 4.15 Power Consumption The following current consumption records are measured on TurboX C40x DK, and any specific equipment configuration or use different from DK may increase power consumption.
THUNDERCOMM TurboX C403-C Datasheet 5 Mechanical Size 5.1 Mechanical Size The size of TurboX™ 40x SoM is 33.8 X 33.8mm. Thickness is 2.
THUNDERCOMM TurboX C403-C Datasheet 5.
THUNDERCOMM TurboX C403-C Datasheet 5.3 SoM Marking 1 2 3 4 5 6 7 8 Figure 5-5 SOM print ①Thundercomm Logo. ② Product Logo. ③④⑤ Product Configuration Code. ⑥ QR Code. ⑦Thundercomm Part Number. ⑧Thundercomm Serial Number. Configuration Part Number ③ ④ ⑤ QCS405 WCN3980 eMCP,8GB eMMC5.1+8Gb LPDDR3 QCS404 WCN3980 eMCP,8GB eMMC5.1+8Gb LPDDR3 QCS405 WCN3999 eMCP,8GB eMMC5.1+8Gb LPDDR3 QCS404 WCN3999 eMCP,8GB eMMC5.1+8Gb LPDDR3 QCS404 WCN3999 eMCP,8GB eMMC5.
THUNDERCOMM TurboX C403-C Datasheet 6 SMT Assembly Guide About the requirements of module secondary assembly please refer to the Thundercomm_Module_Secondary_SMT_Assembly_Guide_V0.1, any query please contact with your vendor.
THUNDERCOMM TurboX C403-C Datasheet This manual applies to the following models: Trade/Brand Name Model FCC ID TurboX TurboX C404 2AOHHTURBOXC404 TurboX C405 2AOHHTURBOXC405 TurboX C405-D 2AOHHTURBOXC405 TurboX C403-C 2AOHHTURBOXC403C The device has been evaluated to meet general RF exposure requirement. TurboX C40X series models are modules without antennas.
THUNDERCOMM TurboX C403-C Datasheet Antenna Type C is Used ForTurboX C403-C Model Antenna Manufacturer: MOLEX Brand Name: N/A Part No.: 1461530100 Antenna Type: Dipole Antenna Bluetooth: 3.00dBi Antenna Gain: 2.4GWIFI: 3.00dBi 5G WIFI: 4.00dBi Manufacturer: Thundercomm Technology Co., Ltd Manufacturer Address: Building 4, No.
THUNDERCOMM TurboX C403-C Datasheet FCC statements: The device for operation in the band 5150–5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. This device complies with part 15 of the FCC rules.
THUNDERCOMM TurboX C403-C Datasheet This device is intended only for OEM integrators under the following conditions: 1. The antenna must be installed such that 20 cm is maintained between the antenna and users. 2. The transmitter module may not be co-located with any other transmitter or antenna. As long as the two conditions above are met, additional transmitter testing will not be required.
THUNDERCOMM TurboX C403-C Datasheet CE statements: Do not use the moudule in the environment at too high or too low temperature, never expose the moudule under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20℃-70℃. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body.
THUNDERCOMM TurboX C403-C Datasheet The device for operation in the band 5150–5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
THUNDERCOMM TurboX C403-C Datasheet EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer: Thundercomm Technology Co., Ltd Building 4, No.
THUNDERCOMM TurboX C403-C Datasheet The Notified Body Teleficationwith Notified Body number0560 performed: Applicable Modules: B+C Where applicable:The issued the EU-type examination certificate:212140058/AA/00. Description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the DoC: Antenna Type A ANT1 Bluetooth : Dipole Antenna, 3dBi ANT1/ANT2 WIFI: Dipole Antenna, 3dBi(2.4GHz), 4dBi(5GHz) Manufacturer:MOLEX Part No.
THUNDERCOMM TurboX C403-C Datasheet EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer: Thundercomm Technology Co., Ltd Building 4, No.
THUNDERCOMM TurboX C403-C Datasheet The Notified Body Phoenix with Notified Body number0700 performed: Applicable Modules: B+C Where applicable:The issued the EU-type examination certificate: . Description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the DoC: Antenna Type A ANT1 Bluetooth : Dipole Antenna, 3dBi ANT1/ANT2 WIFI: Dipole Antenna, 3dBi(2.4GHz), 4dBi(5GHz) Manufacturer:MOLEX Part No.
THUNDERCOMM TurboX C403-C Datasheet EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer: Thundercomm Technology Co., Ltd Building 4, No.
THUNDERCOMM TurboX C403-C Datasheet The Notified Body Telefication with Notified Body number 0560 performed: Applicable Modules: B+C Where applicable:The issued the EU-type examination certificate: . Description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the DoC: Antenna Type Bluetooth : Dipole Antenna, 3dBi WIFI: Dipole Antenna, 3dBi(2.4GHz), 4dBi(5GHz) Manufacturer:MOLEX Part No.
