Quick Start Guide MANCHESTER Series MV212-XV and MV212 Dual 12" Full Size Line Array Element and Variable Curvature Line Array Element for Touring and Install Applications MS215 Dual 15" Vented Bandpass Subwoofer for Touring and Installation Applications MS218 Dual 18" Front Loaded Subwoofer for Touring and Installation Applications MAN-FG Universal Fly Grid for MANCHESTER MV Line Array Elements and MS215 Subwoofers V 1.
MANCHESTER Series Quick Start Guide (EN) Safety Instruction (ES) Instrucción de seguridad (FR) Consignes de sécurité (DE) Wichtige Sicherhteitshinweise 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
4 MANCHESTER Series (NL) Belangrijke veiligheidsvoorschriften 1. Lees deze voorschriften. 2. Bewaar deze voorschriften. 3. Neem alle waarschuwingen in acht. 4. Volg alle voorschriften op. 5. Gebruik dit apparaat niet in de buurt van water. 6. Reinig het uitsluitend met een droge doek. 7. Let erop geen van de ventilatie-openingen te bedekken. Plaats en installeer het volgens de voor-schriften van de fabrikant. 8.
6 MANCHESTER Series Quick Start Guide (EN) Welcome Subwoofer Cabling Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other product, please visit our website at turbosound.com. NOTE: Since MS215 and MS218 subwoofers are wired 1+/- = LF1||LF2; and 2+/- = LINK, in order to power multiple MS215 and MS218 enclosures, it is advised to construct SUB LINK cables wired: 2+ -> 1+ and 2- -> 1-.
8 MANCHESTER Series Quick Start Guide Connections Mode Back Panel Rigging and Acoustic Simulation Software Connector + MV212 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low BI-AMP, Input High + MV212-XV Refer to the MAN-FG rigging manual for safe suspension and installation of the loudspeakers, fly grid and all suspension hardware.
10 MANCHESTER Series Quick Start Guide Suspended Arrays Safety Warning: Only authorised and certified personnel shall design and install suspended configurations, following the instructions and procedures in the rigging manual supplied with the MAN-FG fly grid, or downloaded from turbosound.com. Failure to follow these instructions may lead to death or permanent injury. Ground Stacking Example: an array of two MS215 subwoofers attached to a MAN-FG fly grid.
12 MANCHESTER Series MOM: Output Patching (DSP Module Output to Amplifier Channel Input) 1. Click “I/O Config & Worksheets” Quick Start Guide Please pay attention to MOM, for example, in the diagram below, you can see that both the mid and high output bands of the DSP are patched to the same output number 2. 2. To patch outputs, click on the “Modules” button. 3.
14 MANCHESTER Series Quick Start Guide Array Size Compensation (ASC) Overlays Three ASC overlays are available, and it is recommended that ALL enclosures in the array have ASC selected. The 6 dB low-frequency shelving characteristic offsets LF/MF array coupling. Note: Single MV212 / MV212 XV do not normally require ASC overlay.
16 MANCHESTER Series Quick Start Guide EQ STRATEGY: Considerations for consistant frequency response in the sound field SUBWOOFER TIME ALIGNMENT ILLUSTRATION Flat arrays (minimium inter-element angle between elements) will have an increase in the mid frequency band typically between 630 Hz -2 kHz MS215 and MS218 pre-sets use all-pass filters to set the initial time alignment (assuming the fronts of the cabinets are in line) this greatly reduces system latency. 1.
18 MANCHESTER Series (ES) Bienvenidos Gracias por elegir un producto de altavoz Turbosound para su aplicación. Si desea obtener más información sobre este o cualquier otro producto, visite nuestro sitio web en turbosound.com. Conexiones Modo Panel posterior Conector Esquema interno + MV212 1+ NL4 1Input/ 2+ Link 2- Desembalaje del altavoz Después de desembalar la unidad, compruebe cuidadosamente si hay daños. Si encuentra daños, notifique a su proveedor de inmediato.
20 MANCHESTER Series Quick Start Guide El MAN-FG también viene con una placa de punta única que se puede usar en lugar de la barra de punta. Advertencia: No combine altavoces MV212 y MV212XV en el mismo circuito amplificador / DSP. Superposiciones de compensación de tamaño de matriz (ASC) [Consulte la página 10 para ver la imagen] Advertencia: Preste especial atención a los parches de salida.
22 MANCHESTER Series Quick Start Guide COMPENSACIÓN DE DISTANCE EQ CUBRIR ESTRATEGIA DE EQ: Consideraciones para una respuesta de frecuencia constante en el campo de sonido Todos los altavoces se ven afectados por la pérdida de aire a lo largo de la distancia, este conjunto de superposiciones se realiza en incrementos de 3 my garantiza una respuesta de alta frecuencia equilibrada a lo largo de la distancia.
24 MANCHESTER Series Quick Start Guide ALINEACIÓN DE TIEMPO DEL SUBWOOFER ILUSTRACIÓN Los preajustes MS215 y MS218 utilizan filtros de paso total para establecer la alineación de tiempo inicial (suponiendo que los frentes de los gabinetes estén alineados), esto reduce en gran medida la latencia del sistema. 1. Los sustitutos son adelantados (FR) Bienvenue Merci d’avoir choisi un produit d’enceinte Turbosound pour votre application.
26 MANCHESTER Series Quick Start Guide Connexions Mode Panneau arrière Connecteur Schéma interne + MV212 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low BI-AMP, Input High + MV212-XV Amplifier Channel 2 12+ 1+ 2- BI-AMP, Input High - MHF 2 - 1+ NL4 1Input/ 2+ Link 2- + - 1+ NL4 1Input/ 2+ Link 2- Attention: Ne combinez pas les enceintes MV212 et MV212XV sur le même circuit amplificateur/DSP.
28 MANCHESTER Series Quick Start Guide Superpositions de compensation de taille de matrice (ASC) Trois superpositions ASC sont disponibles et il est recommandé que TOUS les boîtiers de la baie aient sélectionné ASC. [Veuillez voir la page 14 pour l'image] La caractéristique de plateau basse fréquence de 6 dB compense le couplage du réseau LF/MF. Remarque: les MV212 / MV212 XV simples ne nécessitent normalement pas de superposition ASC.
30 MANCHESTER Series Quick Start Guide STRATÉGIE D’ÉGALISATION: Considérations pour une réponse en fréquence cohérente dans le champ sonore ALIGNEMENT HORAIRE DU CAISSON DE GRAVES Les réseaux plats (angle inter-éléments minimum entre les éléments) auront une augmentation de la bande de fréquence moyenne généralement comprise entre 630 Hz - 2 kHz Les préréglages MS215 et MS218 utilisent des filtres 1.
32 MANCHESTER Series (DE) Herzlich willkommen Vielen Dank, dass Sie sich für ein Turbosound-Lautsprecherprodukt für Ihre Anwendung entschieden haben. Wenn Sie weitere Informationen zu diesem oder einem anderen Produkt wünschen, besuchen Sie bitte unsere Website unter turbosound.com. Anschlüsse Modus Rückseite Verbinder Interner Schaltplan + MV212 1+ NL4 1Input/ 2+ Link 2- Auspacken des Lautsprechers Nach dem Auspacken des Gerätes bitte sorgfältig auf Beschädigungen prüfen.
34 MANCHESTER Series Der MAN-FG wird auch mit einer Groundstack-Platte geliefert, die am hinteren Befestigungspunkt der MV212-Lautsprecher für das Groundstacking befestigt wird. [Das Bild finden Sie auf Seite 10] Beispiel: ein Array von MV212-Lautsprechern, das an der Unterseite des MAN-FG Fly Grid befestigt ist. Die hinteren Montageplatten des MV212 passen die Winkel an. [Das Bild finden Sie auf Seite 10] Beispiel: ein Array von zwei MS215 Subwoofern, die an einem MAN-FG Fliegengitter befestigt sind.
36 MANCHESTER Series Quick Start Guide ENTFERNUNGS-EQ-KOMPENSATION ÜBERLAGERUNG EQ-STRATEGIE: Überlegungen für einen konsistenten Frequenzgang im Schallfeld Alle Lautsprecher sind von Luftverlust über die Entfernung betroffen, dieser Satz von Überlagerungen ist in Schritten von 3 m und sorgt für einen ausgewogenen Hochfrequenzgang über die Entfernung.
38 MANCHESTER Series Quick Start Guide SUBWOOFER-ZEITAUSRICHTUNG ILLUSTRATION Die Presets MS215 und MS218 verwenden Allpassfilter, um die anfängliche Zeitausrichtung einzustellen (vorausgesetzt, die Fronten der Boxen sind in einer Linie), dies reduziert die Systemlatenz erheblich. 1. Abos sind vorne ÜBERLAGERUNG 39 (PT) Receber Obrigado por escolher um produto de alto-falante Turbosound para sua aplicação.
40 MANCHESTER Series Quick Start Guide Conexões Modo Painel Traseiro Conector Esquemático Interno + MV212 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low BI-AMP, Input High + MV212-XV Amplifier Channel 2 12+ 1+ 2- BI-AMP, Input High - 1+ NL4 1Input/ 2+ Link 2- MHF 2 + LF 1 + - 1+ NL4 1Input/ 2+ Link 2- LF 2 MHF + + - LF 1 LF 2 Aviso: Não combine alto-falantes MV212 e MV212XV no mesmo amplificador / circuito DSP.
42 MANCHESTER Series Quick Start Guide Sobreposições de compensação de tamanho de matriz (ASC) Três sobreposições ASC estão disponíveis e é recomendado que TODOS os gabinetes na matriz tenham o ASC selecionado. [Consulte a página 14 para a imagem] A característica do shelving de baixa frequência de 6 dB compensa o acoplamento de array LF / MF. Nota: MV212 / MV212 XV simples normalmente não requerem sobreposição ASC.
44 MANCHESTER Series Quick Start Guide Estratégia EQ: Considerações para a resposta de frequência consistente no campo do som ALINHAMENTO DE TEMPO DE SUBWOOFER Matrizes planas (ângulo mínimo entre os elementos) terão um aumento na banda de frequência média normalmente entre 630 Hz -2 kHz Os pré-conjuntos MS215 e MS218 usam filtros 1.
46 MANCHESTER Series (IT) benvenuto Grazie per aver scelto un prodotto di altoparlanti Turbosound per la tua applicazione. Se desideri ulteriori informazioni su questo o qualsiasi altro prodotto, visita il nostro sito Web all’indirizzo turbosound.com. Connessioni Modalità Pannello posteriore Connettore Schema interno + MV212 1+ NL4 1Input/ 2+ Link 2- Disimballaggio dell’altoparlante Dopo aver disimballato l’unità, controllare attentamente per eventuali danni.
48 MANCHESTER Series Il MAN-FG è inoltre dotato di una piastra per l’impilamento a terra che si collega al punto di montaggio posteriore degli altoparlanti MV212 per l’impilamento a terra. [Si prega di vedere pagina 10 per l'immagine] Esempio: un array di altoparlanti MV212 attaccato alla parte inferiore del MAN-FG Fly Grid. Le piastre di montaggio posteriori MV212 regolano gli angoli.
50 MANCHESTER Series Quick Start Guide COMPENSAZIONE DISTANZA EQ SOVRAPPOSIZIONE STRATEGIA EQ: Considerazioni per una risposta in frequenza coerente nel campo sonoro Tutti i diffusori sono interessati dalla perdita d’aria a distanza, questo set di sovrapposizioni è in incrementi di 3 m e garantisce una risposta equilibrata alle alte frequenze a distanza.
52 MANCHESTER Series Quick Start Guide ALLINEAMENTO DEL TEMPO DEL SUBWOOFER ILLUSTRAZIONE Le preimpostazioni MS215 e MS218 utilizzano filtri all-pass per impostare l’allineamento temporale iniziale (supponendo che i frontali dei cabinet siano in linea), riducendo notevolmente la latenza del sistema. 1. I sostituti sono in avanti SOVRAPPOSIZIONE 53 (NL) Welkom Dank u voor het kiezen van een Turbosound-luidsprekerproduct voor uw toepassing.
54 MANCHESTER Series Quick Start Guide Verbindingen Modus Achterpaneel Connector Intern schema + MV212 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low BI-AMP, Input High + MV212-XV De MAN-FG wordt ook geleverd met een grondstapelplaat die aan het achterste montagepunt op MV212-luidsprekers kan worden bevestigd voor grondstapeling.
56 MANCHESTER Series Quick Start Guide Array Grootte Compensatie (ASC) Overlays Er zijn drie ASC-overlays beschikbaar en het wordt aanbevolen dat voor ALLE behuizingen in de array ASC is geselecteerd. [Zie pagina 14 voor de afbeelding] De laagfrequente shelving-karakteristiek van 6 dB compenseert de LF/MF-arraykoppeling. Opmerking: voor een enkele MV212 / MV212 XV is normaal gesproken geen ASC-overlay nodig.
58 MANCHESTER Series Quick Start Guide EQ-STRATEGIE: Overwegingen voor een consistente frequentierespons in het geluidsveld SUBWOOFER TIJD UITLIJNING ILLUSTRATIE Platte arrays (minimale hoek tussen elementen tussen elementen) hebben een toename in de middenfrequentieband, typisch tussen 630 Hz -2 kHz MS215 en MS218 pre-sets gebruiken all-pass filters om de initiële tijduitlijning in te stellen (ervan uitgaande dat de fronten van de kasten in lijn zijn), dit vermindert de systeemlatentie aanzienlijk.
60 MANCHESTER Series (SE) Välkommen Tack för att du valde en Turbosound-högtalareprodukt för din applikation. Om du vill ha mer information om denna eller någon annan produkt, besök vår webbplats på turbosound.com. Anslutningar Läge Bakpanelen Anslutning Internt schema + MV212 1+ NL4 1Input/ 2+ Link 2- Packa upp högtalaren Kontrollera noggrant efter skador efter att du har packat upp enheten. Vänligen meddela din leverantör omedelbart om skada upptäcks. Du, mottagaren, måste inleda alla krav.
62 MANCHESTER Series MAN-FG levereras också med en markstapelplatta som fästs på den bakre monteringspunkten på MV212-högtalare för markstapling. [Se sidan 10 för bilden] Exempel: en uppsättning MV212-högtalare anslutna till botten av MAN-FG Fly Grid. MV212 bakre monteringsplattor justerar vinklarna. [Se sidan 10 för bilden] Exempel: en matris med två MS215-subwoofers anslutna till ett MAN-FG-flygnät. MS215 subwoofers kan också monteras bakåt.
64 MANCHESTER Series Quick Start Guide AVSTÅNDSEKVENSERING TÄCKA ÖVER EQ-STRATEGI: Överväganden för konstant frekvenssvar i ljudfältet Alla högtalare påverkas av luftförlust över avstånd, denna uppsättning överlägg är i steg om 3 m och säkerställer ett balanserat högfrekvent svar över avstånd. Peaking eller Bell-filter används för att hålla höjdutrymmet i högfrekvensbandet snarare än filter med höga hyllor som i onödan använder upp utrymmet för frekvens som inte kommer att färdas över långa avstånd.
66 MANCHESTER Series Quick Start Guide SUBWOOFER-TIDJUSTERING ILLUSTRATION MS215 och MS218 förinställningar använder allpassfilter för att ställa in den initiala tidsjusteringen (förutsatt att skåpens fronter är i linje), detta minskar systemets latens kraftigt. 1. Subs är framåt TÄCKA ÖVER 67 (PL) Witamy Dziękujemy za wybranie głośnika Turbosound do swojej aplikacji.
68 MANCHESTER Series Quick Start Guide Znajomości Tryb Panel tylny Złącze + 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low BI-AMP, Input High + MV212-XV Amplifier Channel 2 12+ 1+ 2- BI-AMP, Input High - Ostrzeżenie: Nie łącz głośników MV212 i MV212XV na tym samym obwodzie wzmacniacza / DSP. [Zobacz zdjęcie na stronie 10] Ostrzeżenie: Zwróć szczególną uwagę na łatanie wyjścia.
70 MANCHESTER Series Quick Start Guide Nakładki kompensacji rozmiaru tablicy (ASC) Dostępne są trzy nakładki ASC i zaleca się, aby WSZYSTKIE obudowy w macierzy miały wybrane ASC. [Zobacz zdjęcie na stronie 14] Niskoczęstotliwościowa charakterystyka półkowa 6 dB kompensuje sprzężenie szyku LF/MF. Uwaga: Pojedyncze MV212 / MV212 XV zwykle nie wymagają nakładki ASC.
72 MANCHESTER Series Quick Start Guide STRATEGIA EQ: Rozważania na temat stałej odpowiedzi częstotliwościowej w polu dźwiękowym WYRÓWNANIE CZASU SUBWOOFERA ILUSTRACJA Płaskie tablice (minimalny kąt między elementami między elementami) będą miały wzrost w średnim paśmie częstotliwości zwykle między 630 Hz -2 kHz Wstępne ustawienia MS215 i MS218 wykorzystują filtry wszechprzepustowe do ustawienia początkowego wyrównania czasu (zakładając, że fronty szafek są w jednej linii), co znacznie zmniejsza opóźn
74 MANCHESTER Series (JP) ようこそ アプリケーションに Turbosound スピーカー製品をお選びいただきありがとうございます。この製品またはその他の製 品の詳細については、当社の Web サイト turbosound.
76 MANCHESTER Series MAN-FG には、MV212 スピーカーの背面取り付けポイント に取り付けて接地スタックするための接地スタックプレ ートも付属しています。 [画像は 10 ページをご覧ください] 例: MAN-FG フライグリッドの下部に取り付けられた MV212 スピーカーのアレイ。MV212 リアマウンティングプレー トは角度を調整します。 [画像は 10 ページをご覧ください] 例: MAN-FG フライグリッドに接続された 2 つの MS215 サブ ウーファーのアレイ。MS215 サブウーファーはリアファ イアに取り付けることもできます。 [画像は 10 ページをご覧ください] ハイブリッドアレイは、下部の MS215 サブウーファーの 下部に取り付けられた 2 番目の MAN-FG を使用して構成で きます。その後、MV212 スピーカーをこの下部フライグ リッドに取り付けることができます。 [画像は 10 ページをご覧ください] アレイの最大サイズ、重量、および作業負荷の制 限については、MAN-FG リギングマニュアルを参照 してください。 グラウン
78 MANCHESTER Series Quick Start Guide 距離 EQ 補正 オーバーレイ すべてのスピーカーは、距離による空気損失の 影響を受けます。このオーバーレイのセットは 3 m 刻みであり、距離全体でバランスの取れた 高周波応答を保証します。ピーキングまたはベ ルフィルターは、遠距離を移動しない周波数の ためにヘッドルームを不必要に使い果たす高シ ェルフフィルターではなく、高周波数帯域でヘ ッドルームを維持するために使用されます。 Two elements per amplifier DSP module block EQ 戦略: 音場での一貫した周波数応答に関する考慮事項 9 m, 12 m, 15 m, 18 m, 21 m, 24 m, 27 m, 50 m, and + 50 m ここに、有用な周波数とゲインが距離ととも にどのように変化するかの例をいくつか示し ます。 Flat Array Flat Array Frequency Response Boost in Mid Energy due to physical coupling AirEQ 1
80 MANCHESTER Series Quick Start Guide サブウーファーのタイムアラインメント 図 MS215 および MS218 プリセット 1. 登録者は順調です は、オールパスフィルターを使 用して初期タイムアライメント を設定します (キャビネットの 前面が一列に並んでいると仮定) 。これにより、システムの待ち 時間が大幅に短縮されます。 系统要求 MV212 和 MV212-XV 是双功放 3 路扬声器, 带有无源网络, 用于中高频频段, 它们需要 2 个放大器和 DSP 通道。 MS218 和 MS215 是双低音炮, 需要 1 通道放大器和 DSP 才能正常前向发射操作。 心形低音设置需要额外的放大器和 DSP 通道。 所有曼彻斯特系列扬声器都通过 Lab Gruppen PLM+ 和 D 系列 L 平台专门使用 Lake 预设。 不支持其他放大器和 DSP 平台。 曼彻斯特系列具有强大而简单的预设策略, 利用 Lake 软件的最新功能, 以及对阵列长度和所需投射距离的新声学补偿 (在 本 QSG 后面解释)。 1.
82 MANCHESTER Series Quick Start Guide 连接 模式 MAN-FG 还带有一个单拾取点板, 可以用来代替尖端杆。 后面板 连接器 [图片请看第 10 页] 内部原理图 MV212 + 1+ NL4 1Input/ 2+ Link 2- BI-AMP, Input Low + Amplifier Channel 1 BI-AMP, Input Low - MV212-XV 1+ 1- BI-AMP, Input High + 2- 2+ Amplifier Channel 2 BI-AMP, Input High - 1+ NL4 1Input/ 2+ Link 2- MHF 1 + MHF 2 + LF 1 + - 1+ NL4 1Input/ 2+ Link 2- LF 2 + + 1+ NL4 1Input/ 2+ Link 2- + - MAN-FG 还带有一个接地堆叠板, 可连接到 MV212 扬声器的后 部安装点以进行接地堆叠。 [图片请看第 10 页] 示例: 安装在 MAN-FG Fly Grid
84 MANCHESTER Series Quick Start Guide 阵列大小补偿 (ASC) 叠加 三个 ASC 覆盖可用, 建议阵列中的所有机柜都选择 ASC。 [图片请看第 14 页] 6 dB 的低频搁置特性抵消了 LF/MF 阵列耦合。 注意: 单个 MV212 / MV212 XV 通常不需要 ASC 叠加。 距离均衡补偿 覆盖 所有扬声器都会受到远距离空气损失 的影响, 这组覆盖层以 3 m 为增量, 确保 远距离平衡的高频响应。 峰值滤波器或 贝尔滤波器用于保持高频段的动态余 量, 而不是高架滤波器, 后者不必要地 耗尽不会远距离传播的频率的余量。 Two elements per amplifier DSP module block AirEQ 21 m AirEQ 规则: ASC 叠加说明 ASC 2 至 4: 2 至 4 个元素 覆盖 AirEQ 18 m 请勿同时插入超过 1 个过滤器。 对于中距离, 使用最接近的覆盖可用 AirEQ 15 m AirEQ 叠加可在以下位置获得: 9 m, 12 m, 15 m, 18 m, 21 m, 24 m,
86 MANCHESTER Series Quick Start Guide EQ 策略: 在声场中考虑一致的频率响应 平面阵列 (元件之间的最小元件间角度) 将在中频段增加, 通常在 630 Hz -2 kHz 之间 Flat Array Flat Array Frequency Response 弯曲阵列 (元件之间使用的元件间角度) 通常在 630 Hz - 2 kHz 之间的中频频段会 降低 使用众多行业标准测量软件系统之一、 参考麦克风和声卡, 找到受影响的中频, 并调整每个区域以在区域 / 声场区域之 间保持一致的频率响应。 Lake 软件集成了许多这些软件系统, 更 多信息可以在 www.labgruppen.com 上找到 1. 替补在前 Mid Frequencies High Frequencies 然而, 在现实世界中, 并不总是可 以让您的飞行阵列和您的地面堆 叠低音在垂直平面上对齐。 1.
88 MANCHESTER Series Quick Start Guide Technical Specifications MV212 MV212-XV MS215 MS218 Frequency response (-3 dB)1 50 Hz - 20 kHz 50 Hz - 20 kHz 40 Hz - 115 Hz 30 Hz - 95 Hz Frequency response (-10 dB)1 35 Hz - 20 kHz 35 Hz - 20 kHz 35 Hz - 150 Hz 25 Hz - 115 Hz 100 degrees (H) x 5 degrees (V) LF: 600 W continuous, 2400 W peak MHF: 380 W continuous, 1520 W peak 100 degrees (H) x 10 degrees (V) LF: 600 W continuous, 2400 W peak MHF: 190 W continuous, 760 W peak Omni Omni 1000 W conti
90 MANCHESTER Series Quick Start Guide 91 Other important information Important information 1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. 2. Malfunction.
92 MANCHESTER Series Hereby, Music Tribe declares that this product is in compliance with Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC, and this passive product is not applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU. Full text of EU DoC is available at https://community.musictribe.