For service contact: German Knife Inc. 1-800-500-3519 www.turboairinc.com OWNER & OPERATOR INSTRUCTION MANUAL Model No. GG-22 IMPORTANT SAFETY NOTICE To ensure safe and trouble free performance of you new German knife slicer, we suggest that all personnel who will use and maintain the slicer read and understand the manual before operating the equipment. Should there be any questions or if we can be of further assistance, please call us toll free at (800) 500-3519. www.turboairinc.
TABLE OF CONTENTS PAGE GG-22 Meat Grinder Instruction Manual Inspection 3 Standard Features 3 Specifications 3 Operator Safety 4 Assembly and Operating Instructions 4-5 GG-22 Meat Grinder Parts List 6-8 9 Warranty Information German Knife Industries 4184 E. Conant St., Long Beach, CA 90808 Phone : 800-500-3519 Fax : 310-900-1066 www.turboairinc.
GG-22 MEAT GRINDER INSTRUCTION MANUAL INSPECTION All GG-22’s are inspected prior to packaging to assure both the machine quality, correct inclusion of options, and proper voltage (115V). However, upon unpacking, all items should be carefully verified that they are correct. Any damage, imperfection, or shortages should be reported immediately to your dealer or directly to German Knife Customer Service, and/or shipment carrier. STANDARD FEATURES • 115 Voltage • 11/2 HP Motor • 16 Lbs.
GG-22 MEAT GRINDER INSTRUCTION MANUAL MOTOR : GG-22 has a stainless steel feed pan - 530 x 330 x 50mm dimensions. CAPACITY : GG-22 will grind 16 lbs. per minute, first cutting through a 6mm plate. FINISH : Standard finish is stainless steel housing. An attractive stainless steel trim plate is provided at the attachment opening, cushioned on the bottom with resilient rubber feet. Provides clearance to keep the table clean under the chopping unit.
GG-22 MEAT GRINDER INSTRUCTION MANUAL ASSEMBLY WARNING : Disconnect power supply prior to assembly. 1. Mount the grinding cylinder to the housing by firmly tightening handle onto mounting studs. 2. Slide the knife, sharp edges toward the plate, onto the square of the screw assembly. Slide the plate onto the screw assembly. Screw the ring onto the grinding cylinder until it is just snug. Too much pressure can damage the unit. WARNING : The knife is sharp and can cut fingers. 3.
GG-22 MEAT GRINDER PART LIST NO. PART NO. DESCRIPTION QTY.
GG-22 MEAT GRINDER PART LIST NO. DESCRIPTION QTY. 31 PART NO. BOLT 4 32 MOTOR COVER 1 33 BOLT, MOTOR COVER 3 34 CAP, OIL 1 35 WASHER 2 36 D.
GG-22 MEAT GRINDER PART LIST 8
LIMITED WARRANTY Warranty Claims... All Claims for parts or labor must be made directly through German Knife or Radiance. All claims should include the model number, serial number, proof of purchase, date of installation and all pertinent information supporting the alleged defect. All warranty claims must be authorized by German Knife or Radiance prior to the purchase of parts or labor. Failure to comply with these warranty policies will result in the voiding of warranty claims. Products Under Warranty...