Build For Luxury Life INSTALLATION MANUAL
Build for Luxury Life
TOOLS REQUIED/OUTILS TOOLS REQUIED REQUIS 1/4" & 1/8" Drill Bits Mallet Pencil level Tape Measure Power Drill Safety Goggles HARDWARE LIST ITEM 1 REFERENCE IMAGE NAME QTY Nut 4 2 Screw ST4*35 4 3 Wall Anchor 4 4 Gasket 4
Build for Luxury Life Step 1 Tape Measure Use the tape measure to survey the high, and draw the horizontal line and the ver�cal line of the wash-basin. Step 2 Make the bo�om parallels with the horizontal line, then mark 4 holes’ place with tape measure .
Build for Luxury Life Step 3 Drill the hole and inject the green rubber pellets 3 x4
Build for Luxury Life Step 4 Drive in the screw cross the Gasket.
Build for Luxury Life Step 6 Screw in the nut.
Build for Luxury Life Step 7 The opening of the mirror cabinet door is 110° 110°
Build for Luxury Life Step 8 A�er power on, the bu�on shows blue and it is in wai�ng state lick to turn on the defogging func�on and the bu�on turn to white Click again to turn off the defogging func�on and the bu�on turn to blue
Build for Luxury Life Step 9 A�er power on, the bu�on shows blue and it is in wai�ng state This is the LED switch.
