Use Instructions
Product Description
• Light Up Twist and Turn Spinning Tops.
• Model: EY10972.
• Rating: non-replaceable 3.7V Li-ion battery.
• Wireless charging base (with three outputs): Input: 5V DC, 800mA max.; Output: 210mA for each.
Important Information
• Please read these instructions carefully before using the Spinning Tops.
• To clean use a soft damp cloth.
• Please retain this information for future reference as it contains.
• Keep away from moisture and dirt.
Battery Information
• The Spinning Tops are supplied with non-replaceable Lithium Ion batteries, do not attempt to replace the batteries.
• The batteries should be recharged by connecting the supplied USB-B cable to a USB port, and the other end to the docking station. Not suitable to adopt power from transformer.
• Place the Spinning Tops on the docking station and ensure they sit at on the wireless charging pads.
• The LEDs will ash to indicate charging is taking place. If in storage for long periods or on arrival after being stored in the warehouse, it may take time until the LEDs will come on.
• Do not leave the spinning tops on charge for long periods, it is good practice to only charge when they are at to preserve the useful life of the battery.
• The recharging actions must be handled by adults. Keep children away from the toy while recharging the batteries.
• Battery chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used
until the damage has been repaired.
Instructions for Use
• Knock the Spinning Tops to activate them. Spin them to light up. Changing the direction of rotation will change the colour. Faster speeds will make the lights brighter.
• After approximately 1 minute with no movement, the Spinning Tops will enter standby, and will need to be knocked to reactivate them.
• If the Spinning Tops no longer illuminate, connect the charger as described in the battery information section.
Cleaning and Maintenance
• Unplug the wireless charging base before cleaning.
• Never immerse the toy and charging base into water or liquids.
• Wipe the toy and charging base with a damp cloth or use a mild, non-abrasive soap solution.
• Make sure to properly clean the unit before storing it in a cool, dry place.
10 Months +
TTS Group Ltd.
NG17 9GU, UK.
Made in China,
on behalf of TTS Group
TTS Product Codes:
EY10972
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device must not
be co-located or operating in conjunction with any other antenna or transmitter
.
• Increase the separation between the equipment and receiver.
FCC ID: 2ADRE-EY10972
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
TTS Group Ltd.