3. OPERATION 3.1 ICONS on LCD - Channel readout : Shows the current channel number. 3.
1) PTT switch : Push and hold to transmit ; release to receive. 2) Power Key : Turn on or off the Power 3) Channel Key : After pressing the Channel Key, the 2 Way Radio frequency channel can be changed by pressing the Up/Down Key. In a FM Radio Mode, the Channel Key is used as the FM frequency seek function. 4) Call Key : A call signal is transmitted by pressing the Call Key.
To select the channel * Turn the radio on. * Press Channel button once, [XX] digit will blink on the LCD. XX is a channel. * Press up[▲] or down[▼] button to choose the channel. * Press the PTT button or Channel button to confirm. 3) VOX (Voice Operated Switching) You do not have to operate the PTT button each time when you want to transmit. You can also choose the VOX sensitivity so suit your environment of operation. ( Ex : noisy road, motor bike, factory etc.
7) FM Radio Frequency Scanning With the Frequency Scanning, a frequency of FM Radio can be selected. By pressing the scanning button, a desirable frequency can be chosen. To activate the Scan * Set the FM Radio Mode by pressing the Monitor Button long. * Scanning is initiated when the Channel Button is pressed. * If the Channel Button is pressed after a FM frequency was selected by scanning, the selected FM frequency is skipped and the scanning resumes.
[RF EXPOSURE STATEMENT : PDHGMRSWP1 / TTI TECH CO., LTD.] - CAUTION! - IMPORTANT SAFETY INFORMATION Your wireless hand-held portable transceiver contains a radio frequency transmitter. When the PTT button is pushed, the transmitter sends out RF signals. The device is authorized to operate at a transmit duty factor not exceeding 50% using alkaline “AAA” size batteries to comply with Federal Communications Commissions (FCC) RF exposure safety level guidelines for hand-held wireless devices.