GMRS-7000 USER MANUAL 2-WAY PORTABLE HANDHELD RADIO DECEMBER, 20 , 2001 1/17
FCC License required This Transceiver is intended for use in the operation of commercial activities. The Federal Communications commission (FCC) requires you to be licensed before you operate this transceiver.
involve the safety of life or property. ! You must take reasonable precautions to prevent harmful interference to other services operating on the same frequency. ! You must not transmit connection with commercial broadcasting.
Safety Information Your radio contains a low power transmitter. When the PTT button is pushed it sends out radio frequency (RF) signals. In August 1996, the FCC adopted RF exposure guidelines with safety levels for hand-held wireless devices. Cautions: • To maintain compliance with the FCC’s RF exposure guidelines, hold the entire radio, including the antenna, at least 2 inches (5 cm) from your face, with the antenna pointed up and away from your face.
CONTENT 1. GENERAL 1.1 General 1.2 Characteristic 1.3 Composition 2. SPECIFICATION 2.1 General Specification 2.2 Electrical Specification 3. OPERATION 3.1 ICON on LCD 3.2 Key Functions 3.3 Setting and Operation 4. CHANNEL DATA 1. GENERAL 1.1 GENERAL This equipment, GMRS-7000 is called 2 way portable handheld radio. The frequency range is 462MHz, UHF operating Channel for international 2 way radio. Also it has a 38 CTCSS feature to achieve the clear communication without interference.
1.2 CHARACTERISTIC a) All active device in this radio is composed of semiconductor and high density IC. b) CPU of this equipment is H8/3802 from HITACHI c) Its power is operated by Ni-MH 7.2V battery. 1.3 COMPOSITION This radio is composed of following. a) Transceiver (W/Antenna) b) Belt clip 2. SPECIFICATION 2.1 GENERAL SPECIFICATIONS a) Frequency range : 462.5500 ~ 462.7250 MHz b) Channel Frequency ( Weather ) : 161.6500 ~ 163.
2.2 ELECTRICAL SPECIFICATION a) TRANSMITTER 1) Output power : Hi : 3.0W / Lo : 1.0W 2) Frequency Stability : ± 5 ppm 3) Modulation Method : FM 4) Oscillation Method : PLL SYNTHESIZER 5) Spurious Emission : < -60dBc 6) FM Hum/Noise : 35dB Min 7) Distortion : < 5% at 1 KHz 8) Current Drain : 1200 mA Max b) RECEIVER 1) Sensitivity : 12dB SINAD 2) Selectivity : -50dB 3) Intermodulation : -50dB 4) Spurious and Image Rejection : -50dB 5) Audio Out Power : 300mW Max at 8 ohm 6) FM Hum & Noise : -45dB 3.
1) Monitor indicator : Appears when the Monitor (M) button is pressed and the channel monitor function is activated. 2) Key lock indicator : Appears when the keypad is locked. This function disables keys such as channel up/down and MODE. 3) Beep ON/OFF indicator : Appears while key tone is in use and disappears when tone is off. 4) Roger On/Off indicator : Appears while Roger tone is on, and disappears when tone is not in use. 5) Battery indicator : Indicates the battery charge level.
The frequency is NOT monitored by authorities ). 3.2 Key Function M ODE SCA N EMG 1) PTT Button : Push and hold to transmit ; release to receive. 2) Monitor Button : This button is used to check activity on the current frequency before transmitting. 3) Up/Down key : In the stand-by mode, Pressing this button will increment or decrement the listening volume.When in function edit mode, this button will be used to adjust the unit's settings..
8’th press – Call 6) Emergency ( EMG ) Call Button : This radio has a quick access button( EMG ) to the Emergency and Assistance Channel. This channel is not monitored by local authorities. When using this channel, EMG appears on the display.
Small Segment Display: Displays CTCSS tone option in the channel from 00 to 38, and also displays the caller ID number(01–10) when caller ID function is active. Coded Tone Controlled Squelch System(CTC) Indicator: Icon appears when the CTCSS tone function is active. Dual Watch mode Indicator: Icon appears when dual watch mode is active. Voice Activated Transmission (VOX) Indicator: This function allows handsfree conversation. The Icon appears when the VOX mode is activated.
GMRS-7000 has 15 main channels and 38 sub-channels. ! 14 Frequency channels ! 38 CTCSS Code ( indicated by CTC icon on the LCD ) To select the channel ! Turn the radio on. ! Press MODE button once, [XX] digit will blink on the LCD. XX is a channel. ! Press up[″]or down[…] button to choose the channel. ! Press the PTT button or MODE button to confirm. To set the tone codes(CTCSS) ! Press MODE button once more, [XX oF, 01 up to 38] will appear and CTC icon and tone code digit will blink on the LCD.
To set the dual watch(DW) channel ! Press the up[″]or down[…] button to choose the channel. “ oF” means no DW mode. “ 01 up to 15” means the channel is dual-watched. ! Press the PTT button or MODE button to confirm. 5) Power Selection Mode This feature permits selection of the transmitting power level to high or low. Using low power, the unit will have a lower transmit range but battery life will Be increased.
To set your favorite call ringer signal. ! Press the MODE button until the [C 01 or up to 03] appears on the LCD. ! Press the up[″]or down[…] button to select the call melody type. ! Press the PTT button to confirm. ! To activate the call, click the “ PTT” button twice quickly. 9) Out-of-range Alarm Icon blinks as the receiving signal is getting weaker. The Icon stops blinking when the receiving signal comes back to normal strength.
It is used to check activity on the current frequency before transmitting. To activate the monitor feature ! Press and hold the “ M”(monitor) button for over two seconds. ! You will hear static if frequency is clear. ( The monitor icon will appear on the LCD.) To disable the monitor feature ! Press and hold the “ M”(monitor) button for over two seconds. ( The monitor icon will disappear on the LCD.
! Use the Up or Down button to enable(On) or disable(oF) the alert function. The weather icon will stop blinking on the display when the alert is disabled. ! Press the PTT button to confirm your selection ! Press and hold the mode button for at least 2 seconds to exit the weather function. When the unit is in GMRS/FRS, if a weather alert signal is received, the unit will generate a warning tone.
4. CHANNEL DATA 1) GMRS Frequency Chart Channel 1 2 3 4 5 6 7 Frequency (MHz) 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 Channel 8 9 10 11 12 13 14 15 Frequency (MHz) 462.5750 462.6250 462.6750 462.5500 462.6000 462.6500 462.7000 462.7250 2) CTCSS Tone Frequency Chart NO FREQ.(Hz) NO FREQ. (Hz) NO FREQ. (Hz) 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 186.2 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123.0 31 192.8 6 82.5 19 127.