User's Manual

ManualsBrandsTTE Technology ManualsElectronicsLCD Multimedia Player

IMPORATANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions

3) Heed all warnings

4) Follow all instructions

5) Do not use this apparatus near water

6) Clean only with dry cloth

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as radiators, heat registers, Stoves, or other

apparatus(including amplifiers) that product heat.

9) Do not defeat the purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your cutlet ,you should consult an electrician for replacement

of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where the exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lighting storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally or has been

dropped.

15) Warning to reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that no objects

filled with liquids, such as vases, shall not be placed on the apparatus.

16) Warning: the mains plug is used as disconnect device, the disconnect device shall remain

readily operable.

17) Do not block any ventilation openings. Leave an open space around the equipment. Never

place the equipment on a bed , sofa, rug, or any other similar surface. Do not place

apparatus to close to drapes/curtains, or in a bookcase, build-in cabinet, or any other similar

places that may cause poor ventilation.

Summary of content (10 pages)

PAGE 1
) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) IMPORATANT SAFETY INSTRUCTION Read these instructions. Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, Stoves, or other apparatus(including amplifiers) that product heat.
PAGE 2
Warn/Caution (1) To prevent electric shock hazard, do not connect to mains supply when door is opened. (2) The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. (3) Danger of explosion if battery is incorrectly replaced .Replace only with the same or equivalent type. (4) An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.
PAGE 3
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. STATEMENT This is a commercial apparatus, for Commercial Use.
PAGE 4
when the machine plays in normal) ④ “▼”button(Press it to move the cursor down in the menu; Or to move down the time and digit in the “Time And Date” item ) ⑤ “MENU” button(Press it to enter or exit the setting menu) ⑥ “▲”button(Press it to move the cursor up in the menu; Or to move down the time and digit in the “Time And Date” item) ⑦ “▶”button(Press it to move the cursor right in the menu; Or to increase volume when the machine plays in normal) Important: ① This remote control uses button battery, it ins
PAGE 5
to enter Main Menu. ② Press”???” button to select the required submenu and press the “confirm” button to confirm. Image Setting Submenu ① Press the” menu” button on the remote control , and then press ?????button in turns to unlock.
PAGE 6
Adjustable range: 0~100 Time-sharing volume: Two options: open/close. When this option is “close”, it means to close the “Time-sharing volume” function, and the volume set in the “volume adjusting” shall prevail all the time. moreover, the ”volume period”, ”start time”, ”end time” and ”volume in this period” options will all get gray and can’t be adjusted; When this option is “open”, it means to open this function, and the “volume adjusting” option will get gray and can’t be adjusted.
PAGE 7
Timing week: Set from Monday to Sunday .After selecting a week, the “time quantum “, ”On time”, ”Off time” will be refreshed and saved. Time quantum: Each number from1 to 5 represents a on-off time quantum. After changing the time quantum, the “On time” and ”Off time” will be refreshed with the time quantum stored in EEPROM. On time: Off time: The same as the clock The same as the clock Time resetting: Clear the “On time” and “Off time”.
PAGE 8
Import the settings in the memory card (*If a machine without this function, then this one is not optional) make the settings which are stored in the memory card set into the EEPOM , and go into effect.
PAGE 9
the USB-WLAN Card, you should do corresponding network settings through ”Wireless network”. ADSL dialing :When connecting the player with the ADSL modem directly rather than Router, then go on ADSL dialing through setting the “ADSL dialing” .Please enter the user name and password of the ADSL. You should do the corresponding operation every time the player is powered on. a.
PAGE 10
Port: 1) Mini USB: Both of the mini USB are used for factory debug. 2) SD port: It is used for the memory of the LCD multimedia player. It can store the resource form the server via the internet. And it also used for SD Play. 3) Network Port: It is used for connecting the server and downloading the resource from the server. 4) USB Port: It is used for updating the software and USB Play from USB Disk. 5) WiFi Antenna 1. Mini USB Port 2. SD Port 3. Network Port 4. USB Port 5.