WT-402 Instruction Manual Key Location Graph FRS Main Screen (Figure 1) 1—The FRS Icon -- Normal Status VOX Status 2—Key Lock Icon 3—Battery Icon --Full -- Empty The unit will make a “beep” sound every 15 (Figure 1) seconds to let you know you have to change the batteries.
Installing Batteries 1. Rotate the belt clip anti-clockwise 2. Open the battery door 3. Install the batteries according to the anode-cathode signs shown (Figure 3) in the battery compartment 4. Close the battery door and rotate the belt clip clockwise. Note: please use 4”AAA” batteries (Figure 4) QUICK GUIDE 1. When the unit is ready A – Open the unit install the batteries & press the MODE key for 1 sec., then you can hear a “DI”, it means the unit is ready.
“T” would be displayed on the LCD. (Refer to Figure 8). D. Release the CALL or PTT key to receive the signal from the other user. --Release the CALL/PTT key and wait for signal, Refer to Figure 9, if “R” is displayed, it means that the device is in the receiving status. You can hear the call ring tone or the talk from the other user. Figure 10 3. How to hear the FM station A. Press the FM key to change you unit status is in FM radio station. (as Figure 10) (Figure 11) B. To select the FM radio station (e.
Functions Setup 1 Setup the FRS Function ------To make sure your unit is in FRS status first, (Figure 15) if (Figure 15) the unit is in FM radio status, please press the FM key to return the FRS status then setting the below functions.
D----Changing SQ Figure 22 D1---In figure 15, press the UP/ DOWN key to enter figure 22. D2---Then press the MODE key to enter its figure 23 D3---Press the UP/DOWN key to change the SQ level, it’ll change the SQ continually if you press the UP/DOWN key more than 1 second. D4---Then press the MODE key again to confirm the setting and (Figure 23) return the main screen. E----Open/Close the VOX & Modulation Sensitivity Ea----Open the VOX Ea1---In figure 15, press the UP/DOWN key to enter figure 24.
F----To select the Call Tone F1---In figure 15, press the UP/DOWN key to enter figure 29 F2---Then press the MODE key again to enter the figure 30 F3---Press the UP/DOWN key to select the tone (1-14) the tone (Figure 29 number will be change continually if you press the UP/DOWN key more than 1sec. (each call tone would be displayed for you during your selecting procedure) F4---Press the MODE key to confirm the setting and return the Figure 30 main screen.
2 Setup the FM Radio Function ------ To make sure your unit is in the FM radio status first, (Figure 37) if the unit is in FRS status, please press the FM KEY to return the FM radio status then setting the below functions. A----To Select the FM Radio Station A1---In figure 37, press the UP/DOWN key to enter figure 38 A2---Press the MODE key to enter figure 39 Figure 37 A3---Press the UP/DOWN key to change the FM radio station in your preferred direction.
E----What to do if FRS signal comes while the unit is in FM radio status E1---While listening to FM Radio, and the unit setting is in auto-to-FRS status (Auto), once a FRS signal come s, the unit will return the FRS status automatically. E2---While listening to FM Radio, and the unit setting is in manual-to-FRS status (Manu), once a FRS signal comes, it will Figure 45 display the select menu as shown in figure 45. At the same time, it will send out “beep” sound once and LCD will flash in every 0.5 second.
3 Setup others function A LCD Backlit (Figure 46) A-1 LCD Backlit would be on for about 8 sec., once a key is pressed. A-2 Turn on and off the LED light (Colour Selection) - Press UP/Down Key when the in the status as what Figure 15 shown, in this way the menu in Figure 46 will be pulled down.
======================================================= TECHNICAL SPECIFICATIONS Description Specs Channels Codes Operating Frequency 14 38 UHF-462.5625 to 467.7125MHz Modulation Talk Range FM Up to 2 miles Power Source 4 AAA Alkaline Batteries or Accessories accumulator LCD FM Radio Backlit 87.5 to 108.0 MHz Channel Frequency Chart Channel Frequency (MHz) Channel Frequency (MHz) 1 462.5625 8 467.5625 2 462.5875 9 467.5875 3 4 462.6125 462.6375 10 11 467.6125 467.6375 5 462.
Troubleshooting of FRS Problem Solution No Power Reposition or replace batteries Message Not Transmitted Make sure the Push-to-Talk button is completely pressed as you transmit. Reposition or replace batteries. Message Not Received Confirm radios have the same Channel and Interference Eliminator Code settings. Make sure Push-to-Talk is not inadvertently being pressed. Reposition or replace batteries Obstructions, operating indoors or in vehicles may interfere with communication. Change your location.
modulating the frequency to the others which signal is strong. Disturbed by the electricity who around the unit or radio equipment, please keep away. Can’t scan the signal of broadcasting station Electricity isn’t full, change the battery The signal of broadcasting station is weakly, modulation the frequency manually.