User's Manual

ManualsBrandsTsuen Shing Enterprises ManualsElectronics2.4GHz DIGITAL BABY PHONE (WITH LCD/ WITH LED)

BM-148 USER MANUAL

TABLE OF CONTENTS

Safety Precautions………………………………………………………………………………

Content and Features……………………………………………………………………………

Indication

LCD version : Main LCD Screen …………………………………………………………..

LED Indicator version: Color Index of Power Indicator………………………………..…

Battery Installation…………………………………………………..

Battery Charging…………………………………………………….

Testing Before First Time Usage………………………………………………………………..

Operations Procedures…………………………………………………………………………..

How to operate 2 way communication between Parents unit and Baby unit………………

Trouble Shooting………………………………………………………………………………….

Technical Specifications………………………………………………………………………….

Congratulations

You have just purchased a quality baby monitor. Please read the instructions thoroughly

before using the monitor system and keep it for future reference.

Safety Precautions

When using this unit, basic Safety Precautions should always be followed to reduce the

risk of fire, electric shock, or personal injury.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on this unit or mentioned in this operation

instruction.

3. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this unit near water such as bathtub, shower or pool. Immersion of this unit

in water could cause an electrical shock.

5. Place the unit securely on a stable surface. Serious damage and/or injury may result if

the unit falls.

6. Do not cover slots and openings on the unit. They are provided for ventilation and

protection against overheating.

7. Install the unit where no one can step or trip on the cord.

8. Never push any objects through slots in this unit. This may result in the risk of fire or

electric shock. Never spill any liquid on the unit.

9. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to

authorized service center or qualified technician when service or repair work is required.

Opening or removing covers may expose you to dangerous voltages or other risks.

Incorrect reassembly can cause electric shock when the unit is subsequently used.

10. Do not expose the unit to extreme temperatures such as areas near a hot radiator or

stove or in a hot car.

Summary of content (14 pages)

PAGE 1
BM-148 USER MANUAL TABLE OF CONTENTS Safety Precautions……………………………………………………………………………… Content and Features…………………………………………………………………………… Indication LCD version : Main LCD Screen ………………………………………………………….. LED Indicator version: Color Index of Power Indicator………………………………..… Battery Installation………………………………………………….. Battery Charging……………………………………………………. Testing Before First Time Usage……………………………………………………………….. Operations Procedures…………………………………………………………………………..
PAGE 2
11. Do not place lighted objects such as candles, cigarettes on the unit. Caution: This product cannot replace responsible adult supervision. z This Baby Monitor is intended as an aid. Do not use it as a medical monitor or a substitute for responsible and proper adult supervision. z Make sure the Parents unit and adaptor cable are always out of child's reach.
PAGE 3
LCD version 4 5 1a 9 6 7 2 10 8 3 11 LED Indicator version 4 1b 5 9 6 2 3 7 10 8 11 1a. LCD Display (for LCD version) 1b. Power Indicator : Red, Green and Orange (for LED Indicator version) 2. Microphone 3. Speaker 4. Belt Clip 5. Lock / Unlock key 6. Battery Compartment 7. Power and Volume Control 8. AC / DC Power Supply Sock 9. PAGE key 10. Music Play and Control 11.
PAGE 4
5 1b 6 2 7 10 3 8 11 4 9 12 13 1a. LCD display (for LCD version) 1b. Power Indicator : Red, Green and Orange (for LED Indicator version) 2. Sound Lights (only for LED Indicator version) - One or two LEDs lighted up means shallow sound received. - Three to five LEDs lighted up means louder sound received. 3. Microphone 4. Speaker 5. Belt Clip 6. Lock / Unlock key 7. Battery Compartment 8. Power and Volume Control 9. AC / DC Power Supply Sock 10.TALK key 11.PAGE key 12.Music Play and Control 13.
PAGE 5
Indicator Indication Parent unit Red Light Baby unit Power is good and no signal Flashing Red Light Battery charging when the unit is turned off Low power; Battery charging when the unit is turned off Flashing Red Light with “Di Di” alert in every 3 seconds Low power N/A Flashing Red Light with “Di” alert in every 1 second Low power and Out of range N/A Green Light Power is good and receiving signal Power is good transmitting signal Flashing Green Light Battery charging receiving signal.
PAGE 6
button Battery Installation 90º Please charge the rechargeable batteries before first time usage. 1. Ensure the unit is off. Press the button on the belt clip and rotate it clockwise or counterclockwise for 90º. 2. Open the battery compartment door. 3. Insert 3 * AAA batteries into the Baby unit and Parents unit according to the +/- signs shown in the battery compartment, respectively. 4. Replace battery compartment door. Press and rotate the belt clip to its normal position.
PAGE 7
1. Use only the AC adaptors which are included in the package, plug into any nearby standard household electrical outlet. 2. Once connect them with the units, charging automatically begins. 3. The charging time for completely charging empty battery takes 12 hours when the unit is turned off. Charging and Fully charged Indication: LED Indicator version In charging (Unit is turned on.) Flashing light LCD version Green/Red or The battery icon loops and flashes. In charging (Unit is turned off.
PAGE 8
-- The LCD displays standby status.(LCD version) -- The power indicator lights and the power is on.(LED Indicator version) NOTE: For the first time usage, turn on both units, they can automatically scan the corresponding code at once without press any key. If reset the corresponding code for both units, user has to press the LINK key. B. Baby unit emission: 1. Place Baby unit in room where you intend to use it. 2. Push the SENSITIVITY switch to a desired position to turn on the Baby unit transmission. 3.
PAGE 9
IMPORTANT! Test sound reception before use and whenever location of Baby unit is changed. (Refer to Testing Before First Time Usage) Note: * Position the Baby unit at least 1 meter away from the baby so that the microphone can pick up the child's sound. * Unwrap and fully extend power cord for best transmission if adaptor is used. Plug the adaptor into the nearest standard household electrical outlet. Operations Procedures A. Power On / Off 1. Connect the Parents unit with the AC adaptor.
PAGE 10
function of Parents unit is not available for use when Baby unit is turned off. - When pressing the TALK key of Parents unit to talk to Baby unit, the music will be stopped playing. - Music playing is not interrupted by call ring tone. E. Sensitivity Level Adjustment (Only for Baby unit) SENSITIVITY slide switch is located in the battery compartment.
PAGE 11
Flashing Red light Baby Unit I. Key Lock / Unlock 1. Turn the right-hand key lock side switch to LOCK position of unit to lock key. The TALK key, PAGE key and MUSIC key are not available for use. 2. Turn the same switch to UNLOCK position to unlock all the keys. J. Belt Clip The Baby unit and Parents unit can both be carried around using the belt clip provided on the rear of each unit.
PAGE 12
Parent unit: Scanning the corresponding code automatically Flashing with “Di” alert sound in every 1 second Baby unit: Baby unit: Both units : Normal status Parent unit: Scanned the corresponding code unsuccessfully Orange light with “Di Di Di” alert sound in every 2 seconds Flashing Scanned the corresponding code successfully Parent unit: still flashing Orange light Baby unit Parent unit Red/ Green light Parent unit: still Orange light with “Di Di Di” alart sound will be heard in every 2 s
PAGE 13
Problems Solutions 1. No power - Unit is turned off. - Check if the batteries are installed properly. - Make sure the adaptor is connected to the Unit properly if using the adaptor instead of batteries. - The Unit may be in low battery status, change new batteries. 2. Message not transmitted. - Sound sensitivity level of Baby unit is too low, turn the sound sensitivity switch to “HI” position. - Units are out of range or lost connection. Ensure the distance between the units within 300m.
PAGE 14
FCC Statement: Caution: The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.