User's Manual

1 / 3

User manual

Dot matrix digital pen

TD-801

Press the Dot matrix pen power button or press the induction pen

tip, the pointer end indicator lights up, and the Dot matrix pen

enters the power-on state. If the indicator light does not go on or

the yellow light flashes, please charge the Dot matrix pen first.

After the battery is fully charged (about 2 hours), it will be turned

on for use.

Specification：

Weight

24.5g

Dimension

154.2*11.2*11.2

（mm）

Input

3.7V / 250mAH

by battery

Standby

Time

50days

Charging

Time

<2Hours

Working

Time

>6 Hours

Wireless

BT 4.2

Transmission

15meters

PAGE 1
User manual Dot matrix digital pen TD-801 Press the Dot matrix pen power button or press the induction pen tip, the pointer end indicator lights up, and the Dot matrix pen enters the power-on state. If the indicator light does not go on or the yellow light flashes, please charge the Dot matrix pen first. After the battery is fully charged (about 2 hours), it will be turned on for use. Specification： Weight 24.5g Dimension 154.2*11.2*11.2 （mm） Input Charging Time Wireless 3.
PAGE 2
distance Dimension 67.2mm*2.3mm of Pen Refill System Windows7 above and Indicator state: Display constantly light State Waiting for BT connecting or finishing charging constantly Connecting blue flash yellow Low power wanning constantly Charging yellow constantly red abnormal state constantly red Memory full FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 3
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.