TSC-RF013 Module Protocol Manual Version 1.01 2009.12.
TSC-RF013 Module Protocol Manual Contents I、Descriptions................................................................................................2 Command Format ........................................................................................................................... 2 II、Function Summary..................................................................................3 Flags List .....................................................................................................
TSC-RF013 Module Protocol Manual I、Descriptions Mandatory Fields Optional Fields Command Format: Request: STX LENS FLAGS COMMAND DATA1 DATA2 ... DATAn CRC 0x02 8bits ... n*8bits 16bits 8bits 8bits 8bits 8bits Response: STX LENS 0x02 8bits Response Code DATA1 DATA2 8bits 8bits 8bits ... DATAn CRC ... n*8bits 16bits STX is the ASCII code for a Start of Transmission.
TSC-RF013 Module Protocol Manual II、Function Summary Flags List Value Function 0x20 General use, with CRC field. 0x68 With CRC field, Tag ID and RF transmitter stays on after the command has been executed. 0x28 With CRC field and RF transmitter stays on after the command has been executed.
TSC-RF013 Module Protocol Manual III、Description of the Transmission 《》 Select Tag Request : Host → Module [02] [05] [20] [14] [01] [9F 9D] 02 = STX 05 = LENS, 5 Bytes {[20][14][00][9F 9D]} 20 = FLAGS, With CRC field. 14 = COMMAND, SELECT_TAG 01 = Data1, Tag Type = I-Code SLI 9F 9D = CRC, Calculated by the host controller.
TSC-RF013 Module Protocol Manual 《》 Read Tag Request : Host Module [02] [07] [28] [24] [01] [02]#1 [01]#2 [A3 3A] #1 : Starting Block #2 : Number of Blocks Response : Module Host Fail : No tag or Wrong tag [02] [03] [A4] [C9 46] Pass: [02] [07] [24] [00 00 00 00] [7C CD] [00 00 00 00] : Block Data -5-
TSC-RF013 Module Protocol Manual 《》 Write Tag Request : Host Module [02] [0B] [28] [44] [01] [02]#1 [01]#2 [00 00 00 00]#3 [7A 5B] #1 : Starting Block #2 : Number of Blocks #3 : Write Data Response : Module Host Fail : No tag or Wrong tag [02] [03] [C4] [AA 40] Pass: [02] [03] [44] [2E 48] -6-
CAUTION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.