TRUSTECH OWNER’S MANUAL Model No. SFH-181TP PLEASE SAVE THESE INSTRUCTIONS WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.
Thank you for choosing our Heater & Fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few minutes to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new product.
opening as this may cause an electric shock or fire, or damage the product. 9. To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where openings may be blocked. 10. This product has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and fire. 11. Always plug products directly into a wall outlet/receptacle.
SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 1500W Unit Size 9.3 in. (W) x5.4 in. (D) x 10.4in. (H) Unit Weight 2.65KG SAFETY FEATURES Overheat Protection Feature This product is equipped with an overheat protection feature. When the products internal components reach a certain temperature that could cause overheating and possible fire, the product will automatically shut off.
IN THE BOX ·2 in 1 HEATER & FAN ·INSTRUCTION PARTS INSTRUCTION High heat Low heat Low fan Indicate light High fan Air outlet 5
MATS Anti-dumping switch PREPARATION Place the product on a firm, horizontal surface and plug into a 120V 60Hz power outlet. Only operate product in upright position. OPERATION INSTRUCTIONS Plug power cord into a standard grounded wall outlet and get it started. Two Modes (Fan/Heater) 1. Switch the knob to set the fan or heat mode. 2. Select Fan mode. Switch clockwise to the fan mode(marked as blue), and select “LO” (18W) or “Hi” (26W) to adjust the fan power. 3. Select Heat mode.
(1500W) to adjust the fan power. OFF Low Fan mode High Heat mode Low Heat mode High Fan mode Picture-1 4. The product has a handle in the back for easy carrying. (Picture-2) Handle Air inlet Picture-2 5. The product can be rotated to 45° and 18°.
Picture-3 MAINTENANCE 1. Unplug the power cord and let it cool completely. 2. To keep the unit clean, the outer case should be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the product. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the product. This may cause damage or deterioration to the surface of the product. 4.
