User Manual Part 1

BACK VIEW
FRONT VIEW
Consolidating 2.4GHz wireless, optical and remote presenter technology.
3-in-1 design for use as a wireless optical mouse at the desktop, a wireless trackball in the air,
a remote presenter while making presentation toward audience.
Ergonomic design for comfort use at the desktop and in the air.
16 channels with 4096 ID/per channel. No interference!
Wide range and long transmission distance for min. 6~8m.
Automode-switch between mouse mode at desktop use and remote trackball in air use.
Angle-adjustable charging cradle with a slide-in mini-receiver.
Charging through USB port from charging cradle or charging cable.
Restorable mini-receiver designed for traveling users.
Page up page down between presentation slides.
Three programmable buttons for quick access of Windows and application programs.
Power On/Off switch to save battery life.
Auto-Link Channel ID.
!
_
+
●
CHARGING
CRADLE / RECEIVER
Indicatior
Red Light ON:
Low Power
Green Light On : Charging Completed
No Light on : Non-working
Third button
Track Ball
4th Button
5th Button
Desk Sensor
Receiver
Low Power indicator
Features:
Power on/off
switch
charging cradle & the
Please recharge the batteries when the Low Power LED ON. If you use up the
betteries, you may need to re-install the batteries again.
SIDE VIEW
CHARGING CABLE
ID
RECEIVER
*
and push
mouse
Presenter
ID Search Button
LED
charging
(2) Through AC/DC adaptor(Optional)
Connect the AC/DC adaptor cord into the DC socket and plug
the adaptor into a wall power outlet to start the recharge process.
(See PIC 1)
( PIC 1)
(Pic 1)
(Pic 2)
Congratulations on your purchase of the world first 2.4GHz multi-functional wireless remote presenter
mouse.
1.
2.
3.
4.
from
Red Light On : Charging
(Please make sure that you are using rechargeable batteries)
Power Indications
A. Power off your PC
B. Plug the USB Charging Cradle with USB Mini-Receiver or USB Mini-
Receiver directly to the USB port.(Refer Pic 1&2)
C. Power on your PC and driver will be installed auto-matically.
A. Auto-link mode:
The Presenter Mouse has auto-link function itself.
B. Manual mode:
1. Press the ID search button on top of the USB Mini-Receiver. Red
LED will start blinking.
2. Press the ID change button on the bottom of the AeroMouse.
3. Red LED on USB Mini-Receiver will start blinking rapidly until
connection is established. Red LED will turn solid red.
4. Red LED on USB Mini-Receiver blinks during normal operation.